Standard-sized Multifunction Devices Sample Clauses

Standard-sized Multifunction Devices. To qualify as ENERGY STAR compliant, multifunction device models designed to handle primarily 8.5" x 11" or A4-sized paper shall meet the specifications provided in Tables 1 and 2. All device speeds shall be measured with respect to the number of 8.5" x 11" or A4-sized images that feed through per minute, as described in Section II.B., above. Table 1. Tier 1 Criteria for the ENERGY STAR Multifunction Device Program (April 1, 1997.) Multifunction Device Speed (images per minute) Sleep Mode (Xxxxx) Sleep Mode Default Time Automatic Duplex Mode 0 < ipm < 10 < 30 < 15 minutes No 10 < ipm < 20 < 120 < 30 minutes No 20 < ipm < 44 < 160 < 60 minutes Optional 44 < ipm < 100 < 180 < 90 minutes Default (copying only) 100 < ipm < 200 < 120 minutes Default (copying only) Table 2. Tier 2 Criteria for the ENERGY STAR Multifunction Device Program (April 1, 1999.) Multifunction Device Speed (images per minute) Low-power Mode1 (Xxxxx) Recovery Time 30 seconds Sleep Mode (Xxxxx) Sleep Mode Default Time Automatic Duplex Mode 0 < ipm < 10 NA NA < 25 < 15 min No 10 < ipm < 20 NA NA < 70 < 30 min No 20 < ipm < 44 3.85 x ipm + 50 Yes < 80 < 60 min Optional 44 < ipm < 100 3.85 x ipm + 50 Recommended < 95 < 90 min Default for both copying and printing/ fax receipt 100 < ipm 3.85 x ipm + 50 Recommended < 105 < 120 min Default for both copying and printing/ fax receipt 1 The low-power mode formula for MFD speeds of 20 < ipm should be read as 3.85 multiplied by the number of images per minute plus 50 W.
Sample 1
AutoNDA by SimpleDocs
Standard-sized Multifunction Devices. To qualify for ENERGY STAR, multifunction device models designed to handle primarily 8.5" x 11" or A4- sized paper shall meet the specifications provided in Table 11. All device speeds shall be measured with respect to the number of 8.5" x 11" or A4-sized images that feed through per minute, as described in Section VI.A.2, above. Multifunction Device Speed (images per minute) Low-power Mode (Xxxxx) Recovery Time 30 seconds Sleep Mode (Xxxxx) Sleep Mode Default Time Automatic Duplex Mode 20 < ipm < 44 3.85 x ipm + 50 Yes < 80 < 60 min Optional 44 < ipm < 100 3.85 x ipm + 50 Recommended < 95 < 90 min Optional 100 < ipm 3.85 x ipm + 50 Recommended < 105 < 120 min Optional
Sample 1
Standard-sized Multifunction Devices. To qualify as Energy Star-compliant, multifunction device models designed to handle primarily 8,5’’ × 11’’ or A4-sized paper shall meet the Specifications provided in Table 14. All device speeds shall be measured with respect to the number of 8,5’’ × 11’’ or A4-sized images that feed through per minute, as described in Section VI.A.2, above. Criteria for Energy Star multifunction devices Multifunction device speed (images per minute) Low-power mode (xxxxx) Recovery time 30 seconds Sleep mode (xxxxx) Sleep mode default time Automatic duplex mode 0 < ipm £ 10 NA NA £ 25 £ 15 min No 10 < ipm £ 20 NA NA £ 70 £ 30 min No 20 < ipm £ 44 3,85 × ipm + 50 Yes £ 80 £ 60 min Optional 44 < ipm £ 100 3,85 × ipm + 50 Recommended £ 95 £ 90 min Optional 100 < ipm 3,85 × ipm + 50 Recommended £ 105 £ 120 min Optional
Sample 1

Related to Standard-sized Multifunction Devices

  • Unbundled Channelization (Multiplexing) 5.7.1 To the extent NewPhone is purchasing DS1 or DS3 or STS-1 Dedicated Transport pursuant to this Agreement, Unbundled Channelization (UC) provides the optional multiplexing capability that will allow a DS1 (1.544 Mbps) or DS3 (44.736 Mbps) or STS-1 (51.84 Mbps) Network Elements to be multiplexed or channelized at a BellSouth central office. Channelization can be accomplished through the use of a multiplexer or a digital cross-connect system at the discretion of BellSouth. Once UC has been installed, NewPhone may request channel activation on a channelized facility and BellSouth shall connect the requested facilities via COCIs. The COCI must be compatible with the lower capacity facility and ordered with the lower capacity facility. This service is available as defined in NECA 4. 5.7.2 BellSouth shall make available the following channelization systems and interfaces: 5.7.2.1 DS1 Channelization System: channelizes a DS1 signal into a maximum of twenty- four (24)

  • Monitoring System In each case in which the Custodian has exercised delegated authority to place Assets with a Foreign Custodian, the Custodian shall establish a system, to re-assess or re-evaluate selected Foreign Custodians, at least annually in accordance with Rule 17f-5(c)(3).

  • NETWORK INTERCONNECTION METHODS 3.1 The Interconnection provided herein may not be used solely for the purpose of originating a Party’s own interexchange traffic.

  • Network Interconnection Architecture Each Party will plan, design, construct and maintain the facilities within their respective systems as are necessary and proper for the provision of traffic covered by this Agreement. These facilities include but are not limited to, a sufficient number of trunks to the point of interconnection with the tandem company, and sufficient interoffice and interexchange facilities and trunks between its own central offices to adequately handle traffic between all central offices within the service areas at a P.01 grade of service or better. The provisioning and engineering of such services and facilities will comply with generally accepted industry methods and practices, and will observe the rules and regulations of the lawfully established tariffs applicable to the services provided.

  • Equipment Failures In the event of equipment failures beyond the Administrator's control, the Administrator shall take reasonable and prompt steps to minimize service interruptions but shall have no liability with respect thereto. The Administrator shall develop and maintain a plan for recovery from equipment failures which may include contractual arrangements with appropriate parties making reasonable provision for emergency use of electronic data processing equipment to the extent appropriate equipment is available.

  • Statistical Sampling Documentation a. A copy of the printout of the random numbers generated by the “Random Numbers” function of the statistical sampling software used by the IRO.‌ b. A description or identification of the statistical sampling software package used by the IRO.‌

  • Network Interface Device 4.1 The NID is defined as any means of interconnection of end-user customer premises wiring to BellSouth’s distribution plant, such as a cross-connect device used for that purpose. The NID is a single-line termination device or that portion of a multiple-line termination device required to terminate a single line or circuit at the premises. The NID features two independent xxxxxxxx or divisions that separate the service provider’s network from the End User’s on-premises wiring. Each chamber or division contains the appropriate connection points or posts to which the service provider and the End User each make their connections. The NID provides a protective ground connection and is capable of terminating cables such as twisted pair cable. 4.1.1 BellSouth shall permit Al-Call to connect Al-Call ’s loop facilities to on-premises wiring through the BellSouth NID or at any other technically feasible point.

  • Floor Load Tenant shall not place a load upon any floor of the Premises that exceeds 50 pounds per square foot “live load”. Landlord reserves the right to reasonably designate the position of all Equipment which Tenant wishes to place within the Premises, and to place limitations on the weight thereof.

  • System Logging The system must maintain an automated audit trail which can 20 identify the user or system process which initiates a request for PHI COUNTY discloses to 21 CONTRACTOR or CONTRACTOR creates, receives, maintains, or transmits on behalf of COUNTY, 22 or which alters such PHI. The audit trail must be date and time stamped, must log both successful and 23 failed accesses, must be read only, and must be restricted to authorized users. If such PHI is stored in a 24 database, database logging functionality must be enabled. Audit trail data must be archived for at least 3 25 years after occurrence.

  • Electrical appliance safety The Hirer shall ensure that any electrical appliances brought by them to the premises and used there shall be safe, in good working order, and used in a safe manner in accordance with the Electricity at Work Regulations 1989. Where a residual circuit breaker is provided the hirer must make use of it in the interests of public safety.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!