Steam Quality Sample Clauses

Steam Quality. 6.1 Steam Conditions (a) Seller will deliver Steam to the Buyer at the Seller’s Steam Delivery Point within the following limits: Pressure @ 250-400 pounds per square inch Temperature @ 400-495°F, 0-50°F superheat (b) If the Buyer utilizes other sources of Steam, isolation will be provided such that no Steam from other sources is or is capable of being mixed with Steam supplied by the Seller. 6.2 Steam Chemistry (a) Seller’s Responsibilities: (i) Seller represents that the water treatment chemicals used in the water from which the Steam is produced are as set forth in “Exhibit B,” which is hereby made a part of this Agreement. (ii) Seller shall provide advance notice to Buyer before any different chemicals are used in water treatment, disclosing the same level of descriptive information for such different chemicals as is contained in “Exhibit B” which is hereby made a part of this Agreement.
Sample 1
AutoNDA by SimpleDocs
Steam Quality. 4.1 The Parties acknowledge that factors such as ambient conditions, pressure, and Feedwater conditions may affect Steam Quality produced by the Project. 4.2 Greensteam shall use all reasonable efforts to provide Steam at a Quality noted in the Project Agreement, and measured pursuant to Section 12. At no time will Steam
Sample 1
Steam Quality. Plant Boiler Combustion Limits and Efficiencies
Sample 1
Steam Quality. The Contractor shall produce and distribute steam to ensure the minimum pressure, temperature and purity requirements are met. Steam pressure shall be maintained at a minimum of 100 pounds per square inch gage (psig) exiting the boiler. Steam meets the minimum specified pressures, temperature and purity requirements throughout the plant and distribution system.
Sample 1
Steam Quality. The Parties acknowledge that factors such as ambient conditions, pressure, and Feedwater conditions may affect Steam Quality produced by the Project.
Sample 1
Steam Quality. 6.1 Steam Conditions (a) Seller will deliver Steam to the Buyer at the Steam Delivery Point within the following limits: Pressure @ 250-400 pounds per square inch Temperature @ 400-495°F, 0-50°F superheat (b) Buyer shall be permitted to purchase sample Steam as delivered to Buyer’s Facility (c) If the Buyer utilizes other sources of Steam, isolation will be provided such that no Steam from other sources is or is capable of being mixed with Steam supplied by the Seller. 6.2 Steam Chemistry (a) Seller’s Responsibilities: (i) Seller represents that the water treatment chemicals used in the water from which the Steam is produced are as set forth in “Exhibit B,” which is hereby made a part of this Agreement. (ii) Seller shall provide advance notice to Buyer before any different chemicals are used in water treatment, disclosing the same level of descriptive information for such different chemicals as is contained in “Exhibit B” which is hereby made a part of this Agreement.
Sample 1
Steam Quality. 4.1 The Parties acknowledge that factors such as ambient conditions, pressure, and Feedwater conditions may affect Steam Quality produced by the Project. 4.2 Greensteam shall use all reasonable efforts to provide Steam at a Quality noted in the Project Agreement, and measured pursuant to Section 12. At no time will Steam below fifty percent (50%) Steam Quality be provided and/or delivered into the Aera pipeline. Greensteam shall use reasonable efforts to adjust the Steam Quality delivered to Aera within seven (7) days of receipt of written notice from Aera designating a desired adjusted Steam Quality. Aera may not request a change in Steam Quality more than once per calendar month. Greensteam shall not be obligated to change the Steam Quality if, in its sole determination, the change would be detrimental to the Project.
Sample 1
AutoNDA by SimpleDocs
Steam Quality. The steam delivered to MWG shall meet the specifications set forth in Exhibit C.
Sample 1

Related to Steam Quality

  • Air Quality To the extent applicable, Consultant must fully comply with all applicable laws, rules and regulations in furnishing or using equipment and/or providing services, including, but not limited to, emissions limits and permitting requirements imposed by the South Coast Air Quality Management District (SCAQMD) and/or California Air Resources Board (CARB). Although the SCAQMD and CARB limits and requirements are more broad, Consultant shall specifically be aware of their application to "portable equipment", which definition is considered by SCAQMD and CARB to include any item of equipment with a fuel-powered engine. Consultant shall indemnify City against any fines or penalties imposed by SCAQMD, CARB, or any other governmental or regulatory agency for violations of applicable laws, rules and/or regulations by Consultant, its subconsultants, or others for whom Consultant is responsible under its indemnity obligations provided for in this Agreement.

  • Service Quality The Transfer Agent shall maintain a quality control process designed to provide a consistent level of quality and timeliness for its call center, correspondence services and transaction processing.

  • Image Quality You are responsible for the image quality of any Image that you transmit. If an Image that we receive from you or for deposit to your Account is not of sufficient quality to satisfy our image quality standards as we may establish them from time to time, we may reject the Image without prior notice to you. Each Image must include the front and back of the Item and the following information must be clearly readable: amount, payee name, drawer signature, date, check number, account number, routing and transit number, MICR (Magnetic Ink Character Recognition) line, and any endorsement or other information written on the check.

  • Quality Assurance/Quality Control Contractor shall establish and maintain a quality assurance/quality control program which shall include procedures for continuous control of all construction and comprehensive inspection and testing of all items of Work, including any Work performed by Subcontractors, so as to ensure complete conformance to the Contract with respect to materials, workmanship, construction, finish, functional performance, and identification. The program established by Contractor shall comply with any quality assurance/quality control requirements incorporated in the Contract.

  • Use; Quality Control a. Neither party may alter the other party’s trademarks from the form provided and must comply with removal requests as to specific uses of its trademarks or logos. b. Each party agrees to use, and to cause its Permitted Sublicensees to use, the other party’s trademarks only in good faith and in a dignified manner consistent with such party’s use of the trademarks. Upon written notice to the breaching party, the breaching party has 30 days of the date of the written notice to cure the breach or the license will be terminated.

  • Water Quality 8.1. The Supply shall comply with the quality standards imposed by the Act and the Water Quality Regulations, PROVIDED ALWAYS that where a particular standard is the subject of a legal instrument accepted or issued by the Secretary of State or the Chief Inspector of Drinking Water under the provisions of the Act or the Water Quality Regulations, compliance with the terms of the relevant legal instrument shall be deemed to be compliance with the relevant quality standard imposed by the Act or the Water Quality Regulations (as the case may be), in which case the Water Company shall provide the New Appointee with a certified copy of any such authorised departure or undertaking. Each party undertakes to keep the other party fully informed of any discussions which take place at any time hereafter with the Secretary of State for the proposed issue of a legal instrument and of the outcome thereof. 8.2. The Water Company shall act as a reasonable and prudent operator to ensure that the Water Company’s Distribution Network does not cause any contamination of the water in the New Appointee’s Water Distribution Network including suspending the Bulk Supply and, in any event, shall: 8.2.1. notify the New Appointee of the existence and cause (if known) of any contamination that it considers (acting as a reasonable and prudent operator) could affect the New Appointee’s Water Distribution Network as soon as practicable after the same have come to the Water Company’s attention; and 8.2.2. keep the New Appointee notified of the steps being taken to remedy the contamination. 8.3. Without prejudice to clause 8.1, the Water Company reserves the right to supply water of a different nature and composition or with different characteristics from that previously supplied where this results from the characteristics of the source or sources from which the Supply is taken, or the Water Company’s Distribution Network, beyond the reasonable control of the Water Company or if, in the due discharge of its statutory duty to supply water, it considers it necessary or desirable to do so acting reasonably and in good faith. 8.4. In addition, both parties agree to be bound by the provisions of the Water Quality Protocol or such modified version of such Water Quality Protocol as may from time to time be agreed in writing by the parties.

  • Power Quality Neither the facilities of Developer nor the facilities of Connecting Transmission Owner shall cause excessive voltage flicker nor introduce excessive distortion to the sinusoidal voltage or current waves as defined by ANSI Standard C84.1-1989, in accordance with IEEE Standard 519, or any applicable superseding electric industry standard. In the event of a conflict between ANSI Standard C84.1-1989, or any applicable superseding electric industry standard, ANSI Standard C84.1-1989, or the applicable superseding electric industry standard, shall control.

  • COUNTY’S QUALITY ASSURANCE PLAN The County or its agent will evaluate the Contractor’s performance under this Contract on not less than an annual basis. Such evaluation will include assessing the Contractor’s compliance with all Contract terms and conditions and performance standards. Contractor deficiencies which the County determines are severe or continuing and that may place performance of the Contract in jeopardy if not corrected will be reported to the Board of Supervisors. The report will include improvement/corrective action measures taken by the County and the Contractor. If improvement does not occur consistent with the corrective action measures, the County may terminate this Contract or impose other penalties as specified in this Contract.

  • Product Quality (a) Tesoro warrants that all Products delivered under this Agreement or any Purchaser Order shall meet the latest applicable pipeline specifications or otherwise mutually agreed upon specifications for that Product upon receipt at the applicable Terminal and contain no deleterious substances or concentrations of any contaminants that may make it or its components commercially unacceptable in general industry application. Tesoro shall not deliver to any of the Terminals any Products which: (i) would in any way be injurious to any of the Terminals; (ii) would render any of the Terminals unfit for the proper storage of similar Products; (iii) would contaminate or otherwise downgrade the quality of the Products stored in commingled storage; (iv) may not be lawfully stored at the Terminals; or (v) otherwise do not meet applicable Product specifications for such Product that are customary in the location of the Terminal. If, however, there are Products that do not have such applicable specifications, the specifications shall be mutually agreed upon by the Parties. Should Tesoro’s commingled Products not meet or exceed the minimum quality standards set forth in this Agreement or any applicable Terminal Service Order, Tesoro shall be liable for all loss, damage and cost incurred thereby, including damage to Products of third parties commingled with Tesoro’s unfit Products. (b) TLO shall have the right to store compatible Products received for Tesoro’s account with Products belonging to TLO or third parties in TLO’s commingled storage tanks. TLO shall handle Tesoro’s fungible Products in accordance with TLO’s prevailing practices and procedures for handling such Products. The quality of all Products tendered into commingled storage for Tesoro’s account shall be verified either by Tesoro’s refinery analysis or supplier’s certification, such that Products so tendered shall meet TLO’s Product specifications. All costs for such analysis shall be borne solely by Tesoro. TLO shall have the right to sample any Product tendered to the Terminals hereunder. The cost of such sampling shall be borne solely by TLO. All Products returned to Tesoro shall meet or exceed Product specifications in effect on the date the Products are delivered to Tesoro. Notwithstanding any other provision herein, any and all Products that leave the Terminals shall meet all relevant ASTM, EPA, federal and state specifications, and shall not leave the Terminals in the form of a sub-octane grade Product. (c) TLO shall exercise reasonable care to ensure that all Products delivered by third parties into commingled storage with Tesoro’s Products meet applicable Product specifications for such Product that are customary in the location of the Terminal. In the event that Tesoro’s Products are commingled with third-party Products that do not meet or exceed the minimum quality standards set forth in this Agreement or any Terminal Service Order, TLO shall be liable for all loss, damage and cost incurred thereby.

  • Quality All products will be new and unused. All products provided by the Contractor must meet all federal, state, and local standards for quality and safety requirements. Products not meeting the requirements of this section will be deemed unacceptable and returned to the Contractor for credit at no charge to the State.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!