Street Sweeping Frequency Sample Clauses

Street Sweeping Frequency. 1631 10.07.9.1 Residential Streets. CONTRACTOR shall provide Street 1632 Sweeping Service for each Curb Mile of residential streets in the Town once every other week 1633 on a scheduled route basis. However, in those instances where the scheduled Street Sweeping 1634 Service day falls on a holiday, as designated in Section 3.14, CONTRACTOR shall adjust the 1635 route schedule as set forth in Section 3.09. 1636 10.07.9.2 Commercial Streets. CONTRACTOR shall provide Street 1637 Sweeping Service for each Curb Mile of commercial streets in the Town once per week on a 1638 scheduled route basis. However, in those instances where the scheduled Street Sweeping 1639 Service day falls on a holiday, CONTRACTOR shall adjust the route schedule as set forth in 1640 Section 3.09. 0000 00.00.00 Street Sweeping Hours of Service. 1642 10.07.10.1 Residential Streets. CONTRACTOR shall provide Street 1643 Sweeping Service on residential streets commencing no earlier than 9:00 a.m. and terminating 1644 no later than 4:00 p.m. Monday-Friday. Street Sweeping Service operates five days per week. 1645 The hours, days, or both of service may be extended due to extraordinary circumstances or 1646 conditions with the prior written consent of the TOWN Representative. Sweeping in residential 1647 areas shall be coordinated with Collection Services to ensure that sweeping occurs after 1648 collection of all Carts has been completed on a specific street. 1649 10.07.10.2 Commercial Streets. CONTRACTOR shall provide Street 1650 Sweeping Service on commercial streets commencing no earlier than 9:00 a.m. and terminating 1651 no later than 4:00 p.m. Monday-Friday. Street Sweeping Service operates five days per week. 1652 The hours, days, or both of service may be extended due to extraordinary circumstances or 1653 conditions with the prior verbal consent of the Town Representative. 1654 10.07.10.3 Street Sweeping in the downtown area or other areas as 1655 designated by the TOWN may commence no earlier than 7:00 a.m. and terminate no later than 1656 4:00 p.m. Monday-Friday. TOWN may restrict the Street Sweeping hours in the downtown area 1657 or other areas where noise or traffic negatively affects the surrounding neighborhoods. 1658 10.07.10.4 Designated collector, arterial streets and TOWN facilities 1659 may be swept on Saturdays between the hours of 8:00 a.m. and 12:00 noon upon approval of 1660 the TOWN. 1661 10.07.10.5 With prior written approval by the TOWN Representative, 1662 CONTRAC...
Sample 1
AutoNDA by SimpleDocs
Street Sweeping Frequency 
Sample 1

Related to Street Sweeping Frequency

  • Provisioning of High Frequency Spectrum and Splitter Space 3.2.1 BellSouth will provide <<customer_name>> with access to the High Frequency Spectrum as follows:

  • Street Lighting 4.4.1 The Developer shall provide streetlights for the entire Subdivision at his sole expense. The type of lighting standard, pole spacing, and installation shall be per Memphis Light, Gas and Water standards. Memphis Light Gas and Water shall bill the City for installation of street lighting per its standards.

  • System Logging The system must maintain an automated audit trail which can 20 identify the user or system process which initiates a request for PHI COUNTY discloses to 21 CONTRACTOR or CONTRACTOR creates, receives, maintains, or transmits on behalf of COUNTY, 22 or which alters such PHI. The audit trail must be date and time stamped, must log both successful and 23 failed accesses, must be read only, and must be restricted to authorized users. If such PHI is stored in a 24 database, database logging functionality must be enabled. Audit trail data must be archived for at least 3 25 years after occurrence.

  • Under-Frequency and Over Frequency Conditions The New York State Transmission System is designed to automatically activate a load- shed program as required by the NPCC in the event of an under-frequency system disturbance. Developer shall implement under-frequency and over-frequency relay set points for the Large Generating Facility as required by the NPCC to ensure “ride through” capability of the New York State Transmission System. Large Generating Facility response to frequency deviations of predetermined magnitudes, both under-frequency and over-frequency deviations, shall be studied and coordinated with the NYISO and Connecting Transmission Owner in accordance with Good Utility Practice. The term “ride through” as used herein shall mean the ability of a Generating Facility to stay connected to and synchronized with the New York State Transmission System during system disturbances within a range of under-frequency and over-frequency conditions, in accordance with Good Utility Practice and with NPCC Regional Reliability Reference Directory # 12, or its successor.

  • Reactive Power and Primary Frequency Response 9.6.1 Power Factor Design Criteria

  • Non-Synchronous Generation The Interconnection Customer shall design its Small Generating Facility to maintain a composite power delivery at continuous rated power output at the high-side of the generator substation at a power factor within the range of 0.95 leading to 0.95 lagging, unless the NYISO or the Transmission Owner in whose Transmission District the Small Generating Facility interconnects has established a different power factor range that applies to all similarly situated non-synchronous generators in the control area or Transmission District (as applicable) on a comparable basis, in accordance with Good Utility Practice. This power factor range standard shall be dynamic and can be met using, for example, power electronics designed to supply this level of reactive capability (taking into account any limitations due to voltage level, real power output, etc.) or fixed and switched capacitors, or a combination of the two. This requirement shall only apply to newly interconnecting non-synchronous generators that have not yet executed a Facilities Study Agreement as of September 21, 2016.

  • Primary Frequency Response Developer shall ensure the primary frequency response capability of its Large Generating Facility by installing, maintaining, and operating a functioning governor or equivalent controls. The term “functioning governor or equivalent controls” as used herein shall mean the required hardware and/or software that provides frequency responsive real power control with the ability to sense changes in system frequency and autonomously adjust the Large Generating Facility’s real power output in accordance with the droop and deadband parameters and in the direction needed to correct frequency deviations. Developer is required to install a governor or equivalent controls with the capability of operating: (1) with a maximum 5 percent droop ± 0.036 Hz deadband; or (2) in accordance with the relevant droop, deadband, and timely and sustained response settings from an approved Applicable Reliability Standard providing for equivalent or more stringent parameters. The droop characteristic shall be: (1) based on the nameplate capacity of the Large Generating Facility, and shall be linear in the range of frequencies between 59 and 61 Hz that are outside of the deadband parameter; or (2) based on an approved Applicable Reliability Standard providing for an equivalent or more stringent parameter. The deadband parameter shall be: the range of frequencies above and below nominal (60 Hz) in which the governor or equivalent controls is not expected to adjust the Large Generating Facility’s real power output in response to frequency deviations. The deadband shall be implemented: (1) without a step to the droop curve, that is, once the frequency deviation exceeds the deadband parameter, the expected change in the Large Generating Facility’s real power output in response to frequency deviations shall start from zero and then increase (for under-frequency deviations) or decrease (for over-frequency deviations) linearly in proportion to the magnitude of the frequency deviation; or (2) in accordance with an approved Applicable Reliability Standard providing for an equivalent or more stringent parameter. Developer shall notify NYISO that the primary frequency response capability of the Large Generating Facility has been tested and confirmed during commissioning. Once Developer has synchronized the Large Generating Facility with the New York State Transmission System, Developer shall operate the Large Generating Facility consistent with the provisions specified in Articles 9.5.5.1 and 9.5.5.2 of this Agreement. The primary frequency response requirements contained herein shall apply to both synchronous and non-synchronous Large Generating Facilities.

  • Start-Up and Synchronization Consistent with the mutually acceptable procedures of the Developer and Connecting Transmission Owner, the Developer is responsible for the proper synchronization of the Large Generating Facility to the New York State Transmission System in accordance with NYISO and Connecting Transmission Owner procedures and requirements.

  • DS3 Loop DS3 Loop is a two-point digital transmission path which provides for simultaneous two-way transmission of serial, bipolar, return-to-zero isochronous digital electrical signals at a transmission rate of 44.736 megabits per second (Mbps) that is dedicated to the use of the ordering CLEC in its provisioning of local exchange and associated exchange access services. It may provide transport for twenty-eight (28) DS1 channels, each of which provides the digital equivalent of twenty-four (24) analog voice grade channels. The interface to unbundled dedicated DS3 transport is a metallic-based electrical interface.

  • Synchronous Generation The Interconnection Customer shall design its Small Generating Facility to maintain a composite power delivery at continuous rated power output at the Point of Interconnection at a power factor within the range of 0.95 leading to 0.95 lagging, unless the NYISO or the Transmission Owner in whose Transmission District the Small Generating Facility interconnects has established different requirements that apply to all similarly situated generators in the New York Control Area or Transmission District (as applicable) on a comparable basis, in accordance with Good Utility Practice.

Time is Money Join Law Insider Premium to draft better contracts faster.