TECHNICAL EVALUATION (a) Detailed technical evaluation shall be carried out by Purchase Committee pursuant to conditions in the tender document to determine the substantial responsiveness of each tender. For this clause, the substantially responsive bid is one that conforms to all the eligibility and terms and condition of the tender without any material deviation. The Institute’s determination of bid’s responsiveness is to be based on the contents of the bid itself without recourse to extrinsic evidence. The Institute shall evaluate the technical bids also to determine whether they are complete, whether required sureties have been furnished, whether the documents have been properly signed and whether the bids are in order. (b) The technical evaluation committee may call the responsive bidders for discussion or presentation to facilitate and assess their understanding of the scope of work and its execution. However, the committee shall have sole discretion to call for discussion / presentation. (c) Financial bids of only those bidders who qualify the technical criteria will be opened provided all other requirements are fulfilled. (d) AIIMS Jodhpur shall have right to accept or reject any or all tenders without assigning any reasons thereof.
Technology Research Analyst Job# 1810 General Characteristics
Synchronization, Commissioning and Commercial Operation 4.1.1 The Power Producer shall give at least fifteen (15) days written notice to the SLDC / ALDC / DISCOM as the case may be, of the date on which it intends to synchronize the Power Project to the Grid System. 4.1.2 Subject to Article 4.1.1, the Power Project may be synchronized by the Power Producer to the Grid System when it meets all the connection conditions prescribed in the Grid Code and otherwise meets all other Indian legal requirements for synchronization to the Grid System. 4.1.3 The synchronization equipment and all necessary arrangements / equipment including Remote Terminal Unit (RTU) for scheduling of power generated from the Project and transmission of data to the concerned authority as per applicable regulation shall be installed by the Power Producer at its generation facility of the Power Project at its own cost. The Power Producer shall synchronize its system with the Grid System only after the approval of GETCO / SLDC / ALDC and GEDA. 4.1.4 The Power Producer shall immediately after each synchronization / tripping of generator, inform the sub-station of the Grid System to which the Power Project is electrically connected in accordance with applicable Grid Code. 4.1.5 The Power Producer shall commission the Project within SCOD. 4.1.6 The Power Producer shall be required to obtain Developer and/ or Transfer Permission, Key Plan drawing etc, if required, from GEDA. In cases of conversion of land from Agricultural to Non-Agriculture, the commissioning shall be taken up by GEDA only upon submission of N.A. permission by the Power Producer. 4.1.7 The Power Producer shall be required to follow the Forecasting and Scheduling procedures as per the Regulations issued by Hon’ble GERC from time to time. It is to clarify that in terms of GERC (Forecasting, Scheduling, Deviation Settlement and Related Matters of Solar and Wind Generation Sources) Regulations, 2019 the procedures for Forecasting, Scheduling & Deviation Settlment are applicable to all solar generators having combined installed capacity above 1 MW connected to the State Grid / Substation including those connected via pooling stations.
Telemedicine Services This plan covers clinically appropriate telemedicine services when the service is provided via remote access through an on-line service or other interactive audio and video telecommunications system in accordance with R.I. General Law § 27-81-1. Clinically appropriate telemedicine services may be obtained from a network or non- network provider, and from our designated telemedicine service provider. When you seek telemedicine services from our designated telemedicine service provider, the amount you pay is listed in the Summary of Medical Benefits. When you receive a covered healthcare service from a network or non-network provider via remote access, the amount you pay depends on the covered healthcare service you receive, as indicated in the Summary of Medical Benefits. For information about telemedicine services, our designated telemedicine service provider, and how to access telemedicine services, please visit our website or contact our Customer Service Department.
Regulatory Affairs From the point in time at which Novartis gives GW notice in writing that it wishes to take on responsibility for Regulatory Filings and Regulatory Approvals in the Territory, Novartis shall be responsible for all interactions with Regulatory Authorities in the Territory with respect to Regulatory Approvals as set forth in this Section 6.1, and including, filing and maintaining any required Regulatory Approvals, seeking necessary permits and/or scheduling or re-scheduling in controlled substance listings or de-scheduling of the Product from controlled substances listings in the Territory. (a) Where required, Novartis (or its applicable Affiliate or Sublicensee) will be responsible for arranging for the Product to be scheduled in any applicable controlled substance schedule(s) in countries in the Territory. GW agrees, without additional consideration, to give all necessary consents, declarations and documentation as are reasonably required to implement the foregoing and to provide Novartis with all assistance reasonably requested by Novartis (including attending meetings with Regulatory Authorities in any such country) for the purpose of arranging for such scheduling. (b) Subject to Section 6.1(g), Novartis (or its applicable Affiliate or Sublicensee) will file and hold all Regulatory Approvals for the Products in countries in the Territory in its own name and on its own behalf. Unless otherwise agreed by the Parties, within ten (10) Business Days following the Effective Date, GW will assign to Novartis all Regulatory Filings with any Regulatory Authority in the Territory at the Effective Date relating to any Product and Novartis will reimburse GW all fees paid by GW to Regulatory Authorities in such countries with respect to the submission of such Regulatory Filings. On request by Novartis, GW will deliver notices of such assignment to the applicable Regulatory Authorities. In addition, GW agrees to give all necessary consents, declarations and documentation as are reasonably required to implement the foregoing. (c) Subject to Sections 4.2 and 6.1(e), Novartis (or its applicable Affiliate or Sublicensee) will be responsible for conducting, at its sole expense, such activities directed towards obtaining and maintaining Regulatory Approvals for Products in the Territory as it determines appropriate in its sole discretion; provided, however, that Novartis agrees to submit Regulatory Filings for Marketing Approvals for a Product in each of the Key Countries. Thereafter, Novartis shall, on a Key Country-by-Key Country basis further prosecute all such Regulatory Filings in the Key Countries in a timely, professional and diligent manner, including by paying all required filing fees promptly and responding to correspondence and requests for further information from Regulatory Authorities in the Key Countries within a reasonable timeframe. Novartis shall share with GW its plans for obtaining Regulatory Approvals in the Key Countries at the first JSC meeting and thereafter shall supply GW with its updated plan from time to time. Novartis shall report its performance against this regulatory plan to the JSC each Calendar Quarter. (d) Novartis will: (A) determine the regulatory plans and strategies for the Products in the Territory; (B) (either itself or through its Affiliates or Sublicensees and subject to Section 6.1(g)) make and own all Regulatory Filings with respect to the Products in the Territory; and (C) will be responsible for obtaining and maintaining Regulatory Approvals with respect to the Products in the Territory in the name of Novartis or its Affiliates or Sublicensees. Accordingly: (i) Novartis, shall at its own cost write, assemble, otherwise prepare and file all Regulatory Filings required to obtain Regulatory Approvals for Products in the Territory; (ii) Novartis shall be the principal contact with all Regulatory Authorities on all matters pertaining to any Product, but shall consult regularly with GW regarding such matters, giving due regard to GW’s views; (iii) Novartis shall provide to GW copies of all substantive correspondence with Regulatory Authorities in the Territory related to any Product, and, to the extent practicable, shall consult with GW in advance of submitting any material correspondence related to any Product to any such Regulatory Authority; (iv) GW shall provide to Novartis copies of all substantive correspondence with the EMA related to any Product and, to the extent practicable, shall consult with Novartis in advance of submitting any material correspondence related to any Product to the EMA in circumstances where such correspondence could reasonably be expected to impact on the Commercialization and/or Regulatory Approvals of any Product in the Territory; (v) Novartis shall provide such notice to GW as is reasonably practicable under the circumstances of upcoming meetings related to any Product with Regulatory Authorities in the Territory. Subject to the consent of the relevant Regulatory Authority, GW shall be entitled to attend any such meetings as an observer, and Novartis may require GW’s attendance at any such meeting it deems to be potentially material; and (vi) Novartis shall pay all filing and maintenance costs of Regulatory Filings and Regulatory Approvals for the Product in the Territory during the Term. (e) GW shall, without additional consideration, fully cooperate with and provide assistance to Novartis in connection with filings to any Regulatory Authority relating to the Product(s) in the Territory in order to obtain or maintain Regulatory Approvals (including Pricing and/or Reimbursement Approvals, where applicable), including by (i) providing Novartis with an electronic copy of the registration dossier for the Product in the European Union as well as providing Novartis with an electronic copy of this registration dossier in eCTD format if and when available in eCTD format, and upon request by Novartis, an electronic copy of a draft of the registration dossier for the Product in the US as soon as such draft is made available to GW (if this draft is made available to GW in eCTD format GW will provide it to Novartis in eCID format); (ii) upon request by Novartis, providing Novartis with draft responses to any requests from Regulatory Authorities in the Territory related to the Development or manufacture of Products (including any requests related to the chemistry manufacturing and controls (CMC) section of any Regulatory Filing); and (iii) executing any required documents, providing access to personnel and providing Novartis with copies of all reasonably required documentation. To the extent requested by Novartis, GW shall also grant or cause to be granted to Novartis and its Affiliates or Sublicensees, within thirty (30) days of receipt of a written request from Novartis, cross-reference rights to any relevant drug master files and other filings submitted by GW or its Affiliates with any Regulatory Authority and any Regulatory Approval for Product issued by any Regulatory Authority to GW or its Affiliates. (f) Subject to Novartis having access to reimbursement data from outside the Territory, data generated by Novartis for reimbursement shall be available for GW and its ex-Territory licensees of the Products to use with respect to the Products outside the Territory. (g) In the event that (A) it is not possible under applicable Laws for Novartis to file for or hold Regulatory Approvals for the Product in any country in the Territory and/or (B) if requested by Novartis in writing to do so, to the extent permitted by applicable Laws and for the duration determined by Novartis, GW will file and/or hold all Regulatory Approvals for the Products in such country, at Novartis’s cost and expense (provided that all such costs and expenses shall be in accordance with a plan and budget agreed in writing by the Parties prior to GW making any such Regulatory Filing), and: (i) GW will be responsible for, and will use diligent efforts in, obtaining and maintaining all Regulatory Approvals necessary for the Commercialization of the Products in the country in question; (ii) GW will provide to Novartis copies of all substantive written communications between GW (or its Affiliates) and any Regulatory Authority in the Territory relating to any Product; (iii) Novartis shall have the right to review and comment upon any Regulatory Filings and correspondence from GW (or its Affiliates) to any Regulatory Authority in the Territory relating to any Product, and GW shall incorporate or address all such comments unless otherwise agreed between the Parties; (iv) GW will request and seek to arrange such meetings and consultations with Regulatory Authorities in the Territory which may be requested by Novartis, with respect to any Product; (v) To the extent permitted by the relevant Regulatory Authorities, Novartis shall have the right to have representatives of Novartis attend and participate in all meetings between GW (or its Affiliates) and any Regulatory Authority in the Territory relating to any Product; it being understood and agreed that to the extent permitted by the relevant Regulatory Authorities, Novartis will lead discussions with any such Regulatory Authority in the Territory. If the applicable Regulatory Authority does not permit Novartis to lead any such discussion, GW will lead the applicable discussions as directed by Novartis; and (vi) Novartis will reimburse GW any and all costs incurred pursuant to the foregoing and in accordance with the agreed plan and budget as follows. Within thirty (30) days after each Calendar Quarter during which GW has incurred any such costs and expenses, GW will provide to Novartis a detailed accounting of all such costs and expenses, and shall submit an invoice to Novartis substantially in the form of Exhibit C with respect to the amount of such costs and expenses. Unless disputed, Novartis shall pay such amount within sixty (60) days after receipt of such invoice. (h) Novartis hereby grants, and undertakes to cause its Affiliates and Sublicensees to grant, to GW and its Affiliates cross-reference rights to any Regulatory Filing for Product submitted by Novartis or its Affiliates or Sublicensees to any Regulatory Authority in the Territory and any Marketing Approval for Product issued by any Regulatory Authority in the Territory to Novartis or its Affiliates or Sublicensees. Novartis shall also grant such cross-reference rights to those of GW’s licensees of the Products for countries outside the Territory for which Novartis, its Affiliates and Sublicensees are granted corresponding cross-reference rights. (i) The Parties will discuss at the JSC the appropriate response to any request received by either Party from a Third Party academic institution to conduct any investigator initiated clinical study of a Product in the Territory. (j) If any information comes into GW’s Control that requires a change to the CMC section of Regulatory Filings or Regulatory Approvals, inside and outside the Territory, to avoid ‘regulatory drift’ GW will inform Novartis in writing of the required change (including by providing the necessary technical documentation in English) and Novartis will file such documentation with the relevant Regulatory Authorities as soon as practicable.
Technical Training The CAISO and the Participating TOs shall respond to reasonable requests for support and provide relevant technical training to each other’s employees to support the safe, reliable, and efficient operation of the CAISO Controlled Grid and to comply with any NERC or WECC operator certification or training requirements. Examples of such technical training include, but are not limited to: (1) the theory or operation of new or modified equipment (e.g., control systems, Remedial Action Schemes, protective relays); (2) computer and applicator programs; and (3) CAISO (or Participating TO) requirements. The Parties shall enter into agreements regarding the timing, term, locations, and cost allocation for the training.
Technical Services Party B will provide technical services and training to Party A, taking advantage of Party B’s advanced network, website and multimedia technologies to improve Party A’s system integration. Such technical services shall include: (a) administering, managing and maintaining Party A’s information application system and website system infrastructure; (b) providing system optimization plans and implementing optimization features; (c) assuring the security and reliability of the website application systems; (d) procuring, installing and supporting the relevant products produced by Party B, and providing training in the use of those products; (e) managing and maintaining all network and providing technologies to assure the reliability and efficiency thereof; (f) providing information technology services and assuring the reliable operation of the information infrastructure.
MINISTRY/SCHOOL BOARD INITIATIVES ETFO will be an active participant in the consultation process to develop a Ministry of Education PPM regarding Ministry/School Board Initiatives.
Laboratory Services Covered Services include prescribed diagnostic clinical and anatomic pathological laboratory services and materials when authorized by a Member's PCP and HPN’s Managed Care Program.
Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer: (a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process; (b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process; (c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards); (d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and (e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.