Power Factor Design Criteria Developer shall design the Large Generating Facility to maintain an effective power delivery at demonstrated maximum net capability at the Point of Interconnection at a power factor within the range established by the Connecting Transmission Owner on a comparable basis, until NYISO has established different requirements that apply to all generators in the New York Control Area on a comparable basis. The Developer shall design and maintain the plant auxiliary systems to operate safely throughout the entire real and reactive power design range. The Connecting Transmission Owner shall not unreasonably restrict or condition the reactive power production or absorption of the Large Generating Facility in accordance with Good Utility Practice.
Power Factor Design Criteria (Reactive Power A wind generating plant shall maintain a power factor within the range of 0.95 leading to 0.95 lagging, measured at the Point of Interconnection as defined in this LGIA, if the ISO’s System Reliability Impact Study shows that such a requirement is necessary to ensure safety or reliability. The power factor range standards can be met using, for example without limitation, power electronics designed to supply this level of reactive capability (taking into account any limitations due to voltage level, real power output, etc.) or fixed and switched capacitors if agreed to by the Connecting Transmission Owner for the Transmission District to which the wind generating plant will be interconnected, or a combination of the two. The Developer shall not disable power factor equipment while the wind plant is in operation. Wind plants shall also be able to provide sufficient dynamic voltage support in lieu of the power system stabilizer and automatic voltage regulation at the generator excitation system if the System Reliability Impact Study shows this to be required for system safety or reliability.
CHANGE IN CLASSIFICATION SPECIFICATIONS Section 1. The Employer shall notify the Union of intended classification studies.
WORK OUTSIDE OF CLASSIFICATION 16.1 Work out of class is a management tool, the purpose of which is to complete essential public services whenever an employee is assigned by proper authority to perform the normal, ongoing duties of and accept responsibility of a position. When the duties of a higher-paid position are clearly outside the scope of an employee’s regular classification for a period of three (3) hours or longer in any one (1) work week, he/she shall be paid at the out-of-class rate while performing such duties and accepting such responsibility. The out-of-class rate shall be determined in the same manner as for promotion and shall be paid for only actual hours worked. “Proper authority” shall be a supervisor who has been designated the authority by a manager or director directly above the position that is being filled out of class and who has budget management authority of the work unit. The City has the sole authority to direct its supervisors as to when to assign employees to a higher class. Employees must meet the minimum qualifications of the higher class and must have demonstrated or be able to demonstrate their ability to perform the duties of the class. The City may work employees out of class across bargaining unit jurisdictions for a period not to exceed six (6) continuous months for any one position. The six (6) month period may be exceeded under the following circumstances: (1) when a hiring freeze exists and vacancies cannot be filled; (2) extended industrial or off-the-job injury or disability; (3) when a position is scheduled for abrogation; or (4) a position is encumbered (an assignment in lieu of a layoff; e.g., with the renovation of the Seattle Center Coliseum). When such circumstances require that an out-of-class assignment be extended beyond six (6) months for any one position, the City shall notify the Union or Unions that represent the employee who is so assigned and/or the body of work that is being performed on an out-of-class basis. After nine (9) months, the Union that represents the body of work being worked out of class must concur with any additional extension of the assignment. The Union that represents the body of work will consider all requests on a good-faith basis.
Schematic Design Phase Services § 3.2.1 The Architect shall review the program and other information furnished by the Owner, and shall review laws, codes, and regulations applicable to the Architect’s services.
253 Design Change (a) “Design Change” is a change in work and/or materials shown in the Schedule of Items and described in Plans or specifications that has been mutually agreed to in writing or ordered by Contracting Officer. Changes of a minor nature (such as adjustment in horizontal and vertical alignment, that do not exceed specified tolerance, necessary to maintain or balance earthwork quantities substantially as designed) and variation in quantities, as described in B5.251, shall not be considered Design Changes.
Local Circuit Switching Capability, including Tandem Switching Capability 4.2.1 Local circuit switching capability is defined as: (A) line-side facilities, which include, but are not limited to, the connection between a loop termination at a main distribution frame and a switch line card; (B) trunk-side facilities, which include, but are not limited to, the connection between trunk termination at a trunk-side cross-connect panel and a switch trunk card; (C) switching provided by remote switching modules; and (D) all features, functions, and capabilities of the switch, which include, but are not limited to: (1) the basic switching function of connecting lines to lines, line to trunks, trunks to lines, and trunks to trunks, as well as the same basic capabilities made available to BellSouth’s customers, such as a telephone number, white page listings, and dial tone; and (2) all other features that the switch is capable of providing, including but not limited to customer calling, customer local area signaling service features, and Centrex, as well as any technically feasible customized routing functions provided by the switch. Any features that are not currently available but are technically feasible through the switch can be requested through the BFR/NBR process.
Class Specifications The Human Resources Division shall determine:
Change in Classification A change in classification shall not alter a nurse’s accrued seniority for purposes of accrual of benefits or placement in the wage schedule.
Temperature Measurement Temperature will be measured by the nearest automatic Melbourne Bureau of Meteorology Monitoring Station for example (but not limited to): Melbourne, Moorabbin, Dunns Hill, Melbourne Airport, Frankston, and Point Xxxxxx. At the commencement of each project, the onsite management and employee representatives shall agree which is to be the applicable automatic weather monitoring station.
