Transfer of Technology 1. The Parties agree to exchange views and information on their law and international practices on the protection and enforcement of intellectual property rights, affecting transfer of technology. This shall, in particular, include exchanges on measures to facilitate information flows, business partnerships, and voluntary licensing and subcontracting agreements. Particular attention shall be paid to the conditions necessary to create an adequate enabling environment for technology transfer in the host countries, including issues such as the domestic legal framework and the development of human capital.
2. When measures are taken with regard to technology transfer, the legitimate interests of the intellectual property right holders shall be protected.
Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer:
(a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process;
(b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process;
(c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards);
(d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and
(e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.
Manufacturing and Marketing Rights The Company has not granted rights to manufacture, produce, assemble, license, market, or sell its products to any other person and is not bound by any agreement that affects the Company's exclusive right to develop, manufacture, assemble, distribute, market, or sell its products.
TRAINING AND EMPLOYEE DEVELOPMENT 9.1 The Employer and the Union recognize the value and benefit of education and training designed to enhance an employee’s ability to perform their job duties. Training and employee development opportunities will be provided to employees in accordance with Employer policies and available resources.
9.2 Attendance at employer-required training will be considered time worked. The Employer will make reasonable attempts to schedule employer-required training during an employee’s regular work shift. The Employer will pay the registration and associated travel costs in accordance with Article 23, Travel, for employer-required training.
Anti-Money Laundering and Red Flag Identity Theft Prevention Programs The Trust acknowledges that it has had an opportunity to review, consider and comment upon the written procedures provided by USBFS describing various tools used by USBFS which are designed to promote the detection and reporting of potential money laundering activity and identity theft by monitoring certain aspects of shareholder activity as well as written procedures for verifying a customer’s identity (collectively, the “Procedures”). Further, the Trust and USBFS have each determined that the Procedures, as part of the Trust’s overall Anti-Money Laundering Program and Red Flag Identity Theft Prevention Program, are reasonably designed to: (i) prevent each Fund from being used for money laundering or the financing of terrorist activities; (ii) prevent identity theft; and (iii) achieve compliance with the applicable provisions of the Bank Secrecy Act, Fair and Accurate Credit Transactions Act of 2003 and the USA Patriot Act of 2001 and the implementing regulations thereunder. Based on this determination, the Trust hereby instructs and directs USBFS to implement the Procedures on the Trust’s behalf, as such may be amended or revised from time to time. It is contemplated that these Procedures will be amended from time to time by the parties as additional regulations are adopted and/or regulatory guidance is provided relating to the Trust’s anti-money laundering and identity theft responsibilities. USBFS agrees to provide to the Trust:
(a) Prompt written notification of any transaction or combination of transactions that USBFS believes, based on the Procedures, evidence money laundering or identity theft activities in connection with the Trust or any Fund shareholder;
(b) Prompt written notification of any customer(s) that USBFS reasonably believes, based upon the Procedures, to be engaged in money laundering or identity theft activities, provided that the Trust agrees not to communicate this information to the customer;
(c) Any reports received by USBFS from any government agency or applicable industry self-regulatory organization pertaining to USBFS’ Anti-Money Laundering Program or the Red Flag Identity Theft Prevention Program on behalf of the Trust;
(d) Prompt written notification of any action taken in response to anti-money laundering violations or identity theft activity as described in (a), (b) or (c) immediately above; and
(e) Certified annual and quarterly reports of its monitoring and customer identification activities pursuant to the Procedures on behalf of the Trust. The Trust hereby directs, and USBFS acknowledges, that USBFS shall (i) permit federal regulators access to such information and records maintained by USBFS and relating to USBFS’ implementation of the Procedures, on behalf of the Trust, as they may request, and (ii) permit such federal regulators to inspect USBFS’ implementation of the Procedures on behalf of the Trust.
Transition Planning The AGENCY will be responsible for the development of the student’s Transition Plan, which begins upon entry and is completed prior to the student’s exit.
PROMOTION AND TRANSFER 9:1 Employees may file requests, in writing, for promotion to the Working Xxxxxxx classification or for a Employees may file requests, in writing, for promotion to the Working Xxxxxxx classification or for a transfer to a new location in their present classification with the Office of the Company. Whenever a vacancy occurs, the Company will, before filling such vacancy, first give consideration to such requests and the following factors being sufficient give preference on the basis of seniority.
(a) Company shall give consideration to applications for promotion and transfer to vacancies on the basis of seniority, ability, licenses, disciplinary history within the previous nine (9) months and qualifications.
9:2 Requests for promotion or transfer shall expire at the end of six (6) months from the time of receipt by Company unless the Company has within the six (6) month period, received a request for extension. If such request for promotion or transfer is offered and the employee refuses, the request becomes null and void and he/she shall resubmit his/her request no sooner than six (6) months after the original request.
9:3 Company may either promote a lower classification or transfer an employee in the same classification, if a job is not filled under Section 9:1.
9:4 Whenever a temporary vacancy occurs in any job classification, the Company may fill it by appointment. If practicable, the Company shall fill such vacancy with the senior qualified employee in the next lower classification within the headquarters. Temporary vacancies shall be those vacancies caused by the absence of an employee due to industrial injury, leave of absence, vacation or sick leave and additional jobs which the Company contemplates will be of ninety (90) days’ duration or less.
9:5 Whenever the Company establishes a new headquarters or additional crews, employees within that geographical division shall be notified a sufficient time in advance to enable them to file a request for transfer or promotion to the new headquarters or crew. The Supervisor in the geographical area will notify the area Business Representative of new crew locations.
9:6 Employees who accept a promotion to a new headquarters will indicate in writing that he understands that acceptance of the promotion establishes him in a new permanent headquarters without lodging.
TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES The goal of this task is to develop a plan to make the knowledge gained, experimental results, and lessons learned available to the public and key decision makers. • Prepare an Initial Fact Sheet at start of the project that describes the project. Use the format provided by the CAM. • Prepare a Final Project Fact Sheet at the project’s conclusion that discusses results. Use the format provided by the CAM. • Prepare a Technology/Knowledge Transfer Plan that includes: o An explanation of how the knowledge gained from the project will be made available to the public, including the targeted market sector and potential outreach to end users, utilities, regulatory agencies, and others.
o A description of the intended use(s) for and users of the project results. o Published documents, including date, title, and periodical name. o Copies of documents, fact sheets, journal articles, press releases, and other documents prepared for public dissemination. These documents must include the Legal Notice required in the terms and conditions. Indicate where and when the documents were disseminated. o A discussion of policy development. State if project has been or will be cited in government policy publications, or used to inform regulatory bodies. o The number of website downloads or public requests for project results. o Additional areas as determined by the CAM. • Conduct technology transfer activities in accordance with the Technology/Knowledge Transfer Plan. These activities will be reported in the Progress Reports. • When directed by the CAM, develop Presentation Materials for an Energy Commission- sponsored conference/workshop(s) on the project. • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the California Energy Commission. • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • Prepare a Technology/Knowledge Transfer Report on technology transfer activities conducted during the project. • Initial Fact Sheet (draft and final) • Final Project Fact Sheet (draft and final) • Presentation Materials (draft and final) • High Quality Digital Photographs • Technology/Knowledge Transfer Plan (draft and final) • Technology/Knowledge Transfer Report (draft and final)
Training and Orientation (a) No employee shall be required to work on any job or operate any piece of equipment until he/she has received proper training and instruction.
(b) The Employer shall provide sufficient and adequate training and/or orientation to any employee working in a new or unfamiliar work area or position.
Transfer of Employees At least three (3) regular work days' notice shall be given to the Union and the employees before workers are transferred from one reporting headquarters to another reporting headquarters. Upon failure to give three (3) days' notice, as stated above, the Employer shall pay one (1) additional day's subsistence for each day notice is not given, as defined in paragraph 5.2 to the existing shop headquarters. Where such penalty is applicable, it shall be based upon the headquarters from which the employee is being transferred. The notice of transfer required by this Section to be given to the Union shall be in writing to the Local Union's Business Office. The postmark date of such letter shall govern compliance. If the transfer is the result of the employee's request made through his/her Xxxxxxx or if no Xxxxxxx is available, the Business Representative, the reimbursement shall be waived.
