Uniformity in Radiation Standards Sample Clauses

Uniformity in Radiation Standards. It is important to strive for uniformity in technical definitions and terminology, particularly as related to such things as units of measurement and radiation dose. There shall be uniformity on maximum permissible doses and levels of radiation and concentrations of radioactivity, as fixed by 10 CFR Part 20 of the NRC regulations based on officially approved radiation protection guides. The NRC staff found that the technical definitions and terminology adopted in the MRCR are essentially identical to the equivalent terms in the NRC regulations. Those terms that are related to units of measurement and radiation doses are essentially identical to the terms contained in 10 CFR Part 20. The MRCR contain all of the provisions on maximum permissible doses, levels of radiation, and concentrations of radioactivity that NRC staff believes necessary in order to be compatible with the regulations of the NRC on the effective date of the Agreement between the Commonwealth and the Commission.
Sample 1
AutoNDA by SimpleDocs
Uniformity in Radiation Standards. It is important to strive for uniformity in technical definitions and terminology, particularly as related to such things as units of measurement and radiation dose. There shall be uniformity on maximum permissible doses and levels of radiation and concentrations of radioactivity, as fixed by 10 CFR Part 20 of the NRC regulations based on officially approved radiation protection guides. The NRC staff found that the technical definitions and terminology adopted in the MRCR are essentially identical to the equivalent terms in the NRC regulations. Those terms that are related to units of measurement and radiation doses are essentially identical to the terms contained in 10 CFR Part 20. The MRCR contain all of the provisions on maximum permissible doses, levels of radiation, and concentrations of radioactivity that NRC staff believes necessary in order to be compatible with the regulations of the NRC on the effective date of the Agreement between the Commonwealth and the Commission. Reference: Massachusetts Regulations for the Control of Radiation at 105 CMR 120.005, 105 CMR 120.203, 105 CMR 120.302, 105 CMR 120.502, 105 CMR 120.772, 105 CMR 120.803, 105 CMR 120.902.
Sample 1

Related to Uniformity in Radiation Standards

  • PRODUCTION STANDARDS The Company may establish minimum production standards applicable to Representative.

  • Institution Standards Residents are also responsible for reading, understanding and adhering to the academic and non-academic policies and procedures that have been established by the Institution, including the Code of Conduct and its penalties.

  • Construction Standards The Subrecipient and Developer shall ensure that all Approved Projects comply with the following requirements:

  • Reformulation Standards A “reformulated” product (a) contains lead in concentrations that do not exceed 90 parts per million, equivalent to 0.009%, in any exterior parts analyzed pursuant to U.S. Environmental Protection Agency (EPA) methodologies 3050B and 6010B, or (b) yields a result of no more than 1.0 micrograms of lead when sampled according to NIOSH 9100 protocol and analyzed according to EPA 6010B. In addition to the above tests, the Settling Entity may use equivalent methods utilized by any California or federal agency to determine lead content in a solid substance or the amount of the bioavailability of the toxicant through a wipe test, respectively.

  • ENVIRONMENTAL PROTECTION STANDARDS CONTRACTOR shall be in compliance with the Clean Air Act (Title 42 USC Section 7401 et seq.), the Clean Water Act (Title 33 USC Section 1251 et seq.), Executive Order 11738 and Environmental Protection Agency, hereinafter referred to as “EPA,” regulations (Title 40 CFR), as any may now exist or be hereafter amended. Under these laws and regulations, CONTRACTOR assures that:

  • Applicable Standards The requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • WORKLOAD STANDARDS One (1) Direct Service Hour (DSH) will be equal to sixty (60) minutes of direct services.

  • OMB Standards Unless specified otherwise within this agreement, the Subrecipient shall procure all materials, property, or services in accordance with the requirements of 24 CFR 84.40−48.

  • AMERICANS WITH DISABILITIES ACT (ADA) COMPLIANCE No Contractor, or Contractor’s agent, shall engage in any discriminatory practice against individuals with disabilities as defined in the ADA, including but not limited to: employment, accessibility to goods and services, reasonable accommodations, and effective communications.

  • Fair Employment Practices and Americans with Disabilities Act Party agrees to comply with the requirement of Title 21V.S.A. Chapter 5, Subchapter 6, relating to fair employment practices, to the full extent applicable. Party shall also ensure, to the full extent required by the Americans with Disabilities Act of 1990, as amended, that qualified individuals with disabilities receive equitable access to the services, programs, and activities provided by the Party under this Agreement. Party further agrees to include this provision in all subcontracts.

Time is Money Join Law Insider Premium to draft better contracts faster.