Use of Corporal Punishment Sample Clauses

Use of Corporal Punishment. ABC Quality defines corporal punishment as the use of physical force to the body as a discipline measure. Physical force to the body includes but is not limited to spanking, slapping, biting, and shaking. (1) If the owner/operator of the facility administers corporal punishment, termination of facility will occur on the 1st offense. 2) If staff in a child care center uses corporal punishment, and the corporal punishment was not condoned by the owner/operator, the provider should be given an opportunity to take appropriate corrective action. If appropriate action is taken, termination will not occur (3) If further instances of corporal punishment are used at the facility within any 12month period, termination of enrollment will occur. When termination is warranted as a result of corporal punishment, the termination process shall be initiated immediately.
AutoNDA by SimpleDocs

Related to Use of Corporal Punishment

  • OWNERSHIP AND USE OF ELIGIBLE CONSUMER DATA Competitive Supplier acknowledges that the Town shall have exclusive ownership of all right, title, and interest in and to all Eligible Consumer data (including addresses, telephone numbers or other identifying information) made available to Competitive Supplier as a result of execution of this ESA. Competitive Supplier shall use Eligible Consumer data solely to provide All- Requirements Power Supply to Participating Consumers and to render other services expressly required or permitted under this ESA. Any other use of Eligible Consumer data without the prior written consent of the Town is strictly prohibited. Pursuant to such authorized use, Competitive Supplier may share such Eligible Consumer data with affiliates and third-party vendors as reasonably necessary to accommodate Competitive Supplier’s provision of All-Requirements Power Supply or other performance pursuant to this ESA (including, without limitation, collection of receivables), provided that Competitive Supplier will take reasonable measures to inform any such vendor of the confidential nature of such data and the restrictions set forth in this Article 2.5 and elsewhere in this ESA. Except as expressly provided in this ESA, Competitive Supplier shall not disclose any Eligible Consumer data to any third-party that has not executed a non-disclosure certificate or agreement in a form mutually acceptable to the Parties, and Competitive Supplier shall take Commercially Reasonable measures to protect Eligible Consumer data from access by, or beneficial use for, any third-party. Notwithstanding the foregoing, the Parties agree that contract employees and entities with which Competitive Supplier contracts to provide contract employees shall not be deemed third parties for purposes of this Section 2.5. To the extent that the provision of All-Requirements Power Supply or other services under this ESA requires that Competitive Supplier have access to or make use of any Eligible Consumer data, Competitive Supplier shall treat such Eligible Consumer data as confidential information. Competitive Supplier may use Eligible Consumer data to engage in direct marketing only during the term of this ESA and subject to the terms set forth in Article

  • CERTIFICATION PROHIBITING DISCRIMINATION AGAINST FIREARM AND AMMUNITION INDUSTRIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has at least ten (10) full-time employees; (c) this contract has a value of at least $100,000 that is paid wholly or partly from public funds; (d) the contract is not excepted under Tex. Gov’t Code § 2274.003 of SB 19 (87th leg.); and (e) governmental entity has determined that company is not a sole-source provider or governmental entity has not received any bids from a company that is able to provide this written verification, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 19 (87th session), the company hereby certifies and verifies that the company, or association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, including a wholly owned subsidiary, majority-owned subsidiary parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of this contract against a firearm entity or firearm trade association. For purposes of this contract, “discriminate against a firearm entity or firearm trade association” shall mean, with respect to the entity or association, to: “(1) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (3) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association. See Tex. Gov’t Code § 2274.001(3) of SB 19. “Discrimination against a firearm entity or firearm trade association” does not include: “(1) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (2) a company’s refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity’s or association’s status as a firearm entity or firearm trade association.” See Tex. Gov’t Code § 2274.001(3) of SB 19.

  • PREVENTION OF FRAUD AND XXXXXXX The Supplier represents and warrants that neither it, nor to the best of its knowledge any Supplier Personnel, have at any time prior to the Commencement Date: committed a Prohibited Act or been formally notified that it is subject to an investigation or prosecution which relates to an alleged Prohibited Act; and/or been listed by any government department or agency as being debarred, suspended, proposed for suspension or debarment, or otherwise ineligible for participation in government procurement programmes or contracts on the grounds of a Prohibited Act. The Supplier shall not during the Term: commit a Prohibited Act; and/or do or suffer anything to be done which would cause the Customer or any of the Customer’s employees, consultants, contractors, sub-contractors or agents to contravene any of the Relevant Requirements or otherwise incur any liability in relation to the Relevant Requirements. The Supplier shall during the Term: establish, maintain and enforce, and require that its Sub-Contractors establish, maintain and enforce, policies and procedures which are adequate to ensure compliance with the Relevant Requirements and prevent the occurrence of a Prohibited Act; keep appropriate records of its compliance with its obligations under Clause 14.3.1 and make such records available to the Customer on request; if so required by the Customer, within twenty (20) Working Days of the Commencement Date, and annually thereafter, certify to the Customer in writing that the Supplier and all persons associated with it or its Sub-Contractors or other persons who are supplying the Ordered Panel Services in connection with this Legal Services Contract are compliant with the Relevant Requirements. The Supplier shall provide such supporting evidence of compliance as the Customer may reasonably request; and have, maintain and where appropriate enforce an anti-bribery policy (which shall be disclosed to the Customer on request) to prevent it and any Supplier Personnel or any person acting on the Supplier's behalf from committing a Prohibited Act. The Supplier shall immediately notify the Customer in writing if it becomes aware of any breach of Clause 14.1, or has reason to believe that it has or any of the Supplier Personnel have: been subject to an investigation or prosecution which relates to an alleged Prohibited Act; been listed by any government department or agency as being debarred, suspended, proposed for suspension or debarment, or otherwise ineligible for participation in government procurement programmes or contracts on the grounds of a Prohibited Act; and/or received a request or demand for any undue financial or other advantage of any kind in connection with the performance of this Legal Services Contract or otherwise suspects that any person or Party directly or indirectly connected with this Legal Services Contract has committed or attempted to commit a Prohibited Act. If the Supplier makes a notification to the Customer pursuant to Clause 14.4, the Supplier shall respond promptly to the Customer's enquiries, co-operate with any investigation, and allow the Customer to audit any books, records and/or any other relevant documentation. If the Supplier breaches Clause 14.3, the Customer may by notice: require the Supplier to remove from performance of this Legal Services Contract any Supplier Personnel whose acts or omissions have caused the Supplier’s breach; or immediately terminate this Legal Services Contract. Any notice served by the Customer under Clause 14.4 shall specify the nature of the Prohibited Act, the identity of the Party who the Customer believes has committed the Prohibited Act and the action that the Customer has elected to take (including, where relevant, the date on which this Legal Services Contract shall terminate).

  • Malicious Use of Orphan Glue Records Registry Operator shall take action to remove orphan glue records (as defined at xxxx://xxx.xxxxx.xxx/en/committees/security/sac048.pdf) when provided with evidence in written form that such records are present in connection with malicious conduct.

  • Provisions for Covered Entity to Inform Business Associate of Privacy Practices and Restrictions (a) Covered Entity shall notify Business Associate of any limitation(s) in the notice of privacy practices of Covered Entity under 45 CFR 164.520, to the extent that such limitation may affect Business Associate’s use or disclosure of protected health information.

  • Use of Paid Leave ‌ With the approval of the Appointing Authority, employees will be allowed to utilize accrued sick leave, personal holiday or vacation leave when on authorized leave without pay due to illness or injury.

  • CERTIFICATION PROHIBITING DISCRIMINATION AGAINST FIREARM AND AMMUNITION INDUSTRIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has at least ten (10) full-time employees; (c) this contract has a value of at least $100,000 that is paid wholly or partly from public funds; (d) the contract is not excepted under Tex. Gov’t Code § 2274.003 of SB 19 (87th leg.); and (e) governmental entity has determined that company is not a sole-source provider or governmental entity has not received any bids from a company that is able to provide this written verification, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 19 (87th session), the company hereby certifies and verifies that the company, or association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, including a wholly owned subsidiary, majority-owned subsidiary parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of this contract against a firearm entity or firearm trade association. For purposes of this contract, “discriminate against a firearm entity or firearm trade association” shall mean, with respect to the entity or association, to: “(1) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (3) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association. See Tex. Gov’t Code § 2274.001(3) of SB 19. “Discrimination against a firearm entity or firearm trade association” does not include: “(1) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (2) a company’s refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity’s or association’s status as a firearm entity or firearm trade association.” See Tex. Gov’t Code § 2274.001(3) of SB 19.

  • Use of the Software licensed hereunder may require third party software or hardware (including but limited to databases, operating systems and servers). Unless specifically licensed in the Master Agreement, this Agreement does not contain a license to use such additional materials.

  • Use of Volunteers The School covenants and represents that all volunteers it allows access to its students or the Facility will comply with state regulations regarding the use of volunteers set out in Section 6.50.18

  • IN CASE OF ERRORS OR QUESTIONS ABOUT YOUR ELECTRONIC TRANSFERS In the event that you believe there has been an error with respect to any original check or image thereof transmitted to the Credit Union for deposit or a breach of this Agreement and Disclosure, you will immediately contact the Credit Union regarding such error or breach as set forth below. • By calling the Credit Union at: 000-000-0000; • By emailing the Credit Union at: xxxxxxxxxx@xxxxxxxxxxx.xxx; or • By writing a letter and sending it to P.O. Box 60890, Los Angeles, CA 00000-0000. Contact us as soon as you can if you think your statement or receipt is wrong or if you need more information about a transfer listed on the statement or receipt. We must hear from you no later than 60 days after we sent the FIRST statement on which the problem or error appeared. • Tell us your name and Account number. • Describe the error or the transfer you are unsure about, and explain as clearly as you can why you believe it is an error or why you need more information. • Tell us the dollar amount of the suspected error. If you tell us orally, we may require that you send us your complaint or question in writing within ten (10) business days. We will tell you the results of our investigation within ten (10)* business days after we hear from you and will correct any error promptly. If we need more time, however, we may take up to 45** days to investigate your complaint or question. If we decide to do this, we will provisionally credit your Account within ten (10)* business days for the amount you think is in error, so that you will have the use of the money during the time it takes us to complete our investigation. If we ask you to put your complaint or question in writing and we do not receive it within ten (10) business days, we may not credit your Account. If we decide that there was no error, we will send you a written explanation within three (3) business days after we finish our investigation. You may ask for copies of the documents that we used in our investigation. * If you assert an error within 30 days after you make the first deposit to your Account, we will have 20 business days instead of ten (10) business days. ** If you give notice of an error within 30 days after you make the first deposit to your Account, or notice of an error involving a transaction initiated outside the United States, its possessions and territories, we will have 90 days instead of 45 days to investigate. In accordance with Visa Operating Rules and Regulations, you will receive a provisional credit for Visa Check Card losses for unauthorized use within five (5) business days after you have notified us of the loss. This does not apply to ATM transactions using a PIN(s).

Time is Money Join Law Insider Premium to draft better contracts faster.