Warranty Disclosure Sample Clauses

Warranty Disclosure. At the time of bid for individual or agency specific contracts, or at the time of ordering Product or Product quote for OGS centralized contracts, Contractor must disclose in writing to Authorized User:
AutoNDA by SimpleDocs
Warranty Disclosure. With respect to priority right assignment of application US 60/3640,306: NEOMED has the following documents:
Warranty Disclosure. At the time of bid, Product order or Product quote, ClearBlue is required to disclose the following information in writing to the Department: a) For ClearBlue Product and for Products (including, but not limited to, ClearBlue and/or Third Party Products and/or Department's Installed Product) which have been specified to perform as a system: Compliance or non-compliance of the Products individually or as a system with the Warranty Statement set forth below; and b) For Third Party Product Not Specified as Part of a System: Third Party Manufacturer's statement of compliance or non-compliance of any Third Party Product being delivered with Third Party Manufacturer/Developer's Year 2000 warranty. If such Third Party Product is represented by Third Party Manufacturer/Developer as compliant with Third Party Manufacturer/Developer's Year 2000 Warranty, ClearBlue shall pass through said Third Party Warranty from the Third Party Manufacturer to the Department but shall not be liable for the testing or verification of Third Party's compliance statement. An absence or failure to furnish the required written warranty disclosure shall be deemed a statement of compliance of the Product(s) or System(s) in question with the Year 2000 Warranty Statement set forth below.
Warranty Disclosure. 1. With respect to priority right assignment of application US 60/3640,306: NEOMED has the following documents: a) [***] (Assignment A); and b) [***] (Assignment B).
Warranty Disclosure. At the time of Product quote, the Vendor is required to disclose the following information in writing to Authorized User: A. FOR VENDOR PRODUCT AND FOR PRODUCTS WHICH HAVE BEEN SPECIFIED TO PERFORM AS A SYSTEM (INCLUDING, BUT NOT LIMITED TO, SYSTEMS INVOLVING 12 C000525 VENDOR AND/OR THIRD PARTY PRODUCTS AND/OR AUTHORIZED USER'S OTHER INSTALLED PRODUCT): Compliance or non-compliance of the Products individually or as a system with the Warranty Statement set forth below; and B. FOR THIRD PARTY PRODUCTS ONLY: Third Party manufacturer's statement of compliance or non-compliance of any Third Party Product being delivered with Third Party Manufacturer/Developer's Year 2000 Warranty. If such Third Party Product is represented by Third Party Manufacturer/Developer as compliant with Third Party Manufacturer/Developer's Year 2000 Warranty, Vendor shall pass through said Third Party Warranty from the Third Party Manufacturer to the Authorized User but shall not be liable for the testing or verification of Third Party's compliance statement.
Warranty Disclosure. At the time of bid for individual or agency specific contracts, or at the time of ordering Product or Product quote for OGS centralized contracts, Contractor must disclose in writing to Authorized User: i. For Contractor Product and Products (including, but not limited to, Contractor and/or Third Party Products and/or Authorized User’s Installed Products) which have been specified to perform as a system: Compliance or non-compliance of the Products individually and as a system with the Warranty set forth below; and ii. For Third Party Product not specified to perform as part of a system: compliance on the grounds that the Contractor has passed- through the third party manufacturer Year 2000 Warranty or non-compliance based upon the fact that a) Contractor indicates that they can not pass through the third party manufacturer’s Year 2000 Warranty or b) there is no third party manufacturer’s Year 2000 Warranty to pass through.

Related to Warranty Disclosure

  • ADV Disclosure The Adviser has provided the Trust with a copy of its Form ADV as most recently filed with the Commission and will, promptly after filing any amendment to its Form ADV with the Commission, furnish a copy of such amendments to the Trust. The information contained in the Adviser’s Form ADV is accurate and complete in all material respects and does not omit to state any material fact necessary in order to make the statements made, in light of the circumstances under which they were made, not misleading.

  • Data Disclosure Under Minnesota Statute § 270C.65, Subdivision 3 and other applicable law, the Contractor consents to disclosure of its social security number, federal employer tax identification number, and/or Minnesota tax identification number, already provided to the State, to federal and state agencies and state personnel involved in the payment of state obligations. These identification numbers may be used in the enforcement of federal and state laws which could result in action requiring the Contractor to file state tax returns, pay delinquent state tax liabilities, if any, or pay other state liabilities.

  • NEPOTISM DISCLOSURE A. In this section the term “relative” means: (1) a person's great grandparent, grandparent, parent, aunt or uncle, sibling, niece or nephew, spouse, child, grandchild, or great grandchild, or (2) the grandparent, parent, sibling, child, or grandchild of the person’s spouse. B. A notification required by this section shall be submitted in writing to the person designated to receive official notices under this contract and by first-class mail addressed to Contract Services, Texas Department of Transportation, 000 Xxxx 00xx Xxxxxx, Xxxxxx Xxxxx 00000. The notice shall specify the Engineer's firm name, the name of the person who submitted the notification, the contract number, the district, division, or office of TxDOT that is principally responsible for the contract, the name of the relevant Engineer employee, the expected role of the Engineer employee on the project, the name of the TxDOT employee who is a relative of the Engineer employee, the title of the TxDOT employee, the work location of the TxDOT employee, and the nature of the relationship. C. By executing this contract, the Engineer is certifying that the Engineer does not have any knowledge that any of its employees or of any employees of a subcontractor who are expected to work under this contract have a relative that is employed by TxDOT unless the Engineer has notified TxDOT of each instance as required by subsection (b). D. If the Engineer learns at any time that any of its employees or that any of the employees of a subcontractor who are performing work under this contract have a relative who is employed by TxDOT, the Engineer shall notify TxDOT under subsection (b) of each instance within thirty days of obtaining that knowledge. E. If the Engineer violates this section, TxDOT may terminate the contract immediately for cause, may impose any sanction permitted by law, and may pursue any other remedy permitted by law.

  • Accuracy of Disclosure The Company represents and warrants to each Holder and agrees for the benefit of each Holder that (i) the Preference Registration Statements and any amendment thereto will not contain any untrue statement of a material fact or omit to state a material fact required to be stated therein or necessary to make the statements contained therein not misleading; and (ii) each of the Prospectuses furnished to such Holder for delivery in connection with the exercise of Preference Warrants or in connection with the sale of Preference Warrant Shares, as the case may be, and the documents incorporated by reference therein will not contain any untrue statement of a material fact or omit to state a material fact required to be stated therein or necessary to make the statements contained therein, in light of the circumstances under which they were made, not misleading; provided, however, that the Company shall have no liability under clause (i) or (ii) of this Section 2.1(c) with respect to any such untrue statement or omission made in a Preference Registration Statement in reliance upon and in conformity with information furnished to the Company by or on behalf of the Holders specifically for inclusion therein.

  • Certification of Accuracy of Disclosure Upon commencement of the offering of the Shares under this Agreement (and upon the recommencement of the offering of the Shares under this Agreement following the termination of a suspension of sales hereunder lasting more than 30 Trading Days), and each time that (i) the Registration Statement or Prospectus shall be amended or supplemented, other than by means of Incorporated Documents, (ii) the Company files its Annual Report on Form 10-K under the Exchange Act, (iii) the Company files its quarterly reports on Form 10-Q under the Exchange Act, (iv) the Company files a Current Report on Form 8-K containing amended financial information (other than information that is furnished and not filed), if the Manager reasonably determines that the information in such Form 8-K is material, or (v) the Shares are delivered to the Manager as principal at the Time of Delivery pursuant to a Terms Agreement (such commencement or recommencement date and each such date referred to in (i), (ii), (iii), (iv) and (v) above, a “Representation Date”), unless waived by the Manager, the Company shall furnish or cause to be furnished to the Manager forthwith a certificate dated and delivered on the Representation Date, in form reasonably satisfactory to the Manager to the effect that the statements contained in the certificate referred to in Section 6 of this Agreement which were last furnished to the Manager are true and correct at the Representation Date, as though made at and as of such date (except that such statements shall be deemed to relate to the Registration Statement and the Prospectus as amended and supplemented to such date) or, in lieu of such certificate, a certificate of the same tenor as the certificate referred to in said Section 6, modified as necessary to relate to the Registration Statement and the Prospectus as amended and supplemented to the date of delivery of such certificate.

  • RISK DISCLOSURE 11.1 The Investment Adviser’s attention is drawn to Schedule 3 which provides important information as to the nature and risks of certain investments which may comprise a Portfolio and a description of certain provisions of the industry standard master agreements and their consequences. The Investment Adviser represents and warrants to the Local Manager that it has read, understood, and accepts the provisions of Schedule 3. Xxxxxx Xxxxxxx Investment Management Limited ( the “Local Manager”) has established and implemented transaction execution arrangements that are designed to allow the Local Manager to take all reasonable steps to obtain the best possible result when executing or placing orders as portfolio manager on behalf of its clients in relation to financial instruments that form part, or may become part, of one or more investment portfolios managed by the Local Manager for that or those clients (each a “Transaction”). For the purposes of this document: any reference to the Local Manager “executing an order” is a reference to the Local Manager, as agent, entering into a Transaction on behalf of a client with another person that acts as principal to that Transaction, any reference to the Local Manager “placing an order” is a reference to the Local Manager, as agent, arranging for a Transaction to be entered into by another person that acts as agent on behalf of a client when entering into that Transaction, and any reference to the Local Manager “effecting a Transaction” is a reference to the Local Manager either placing or executing an order. As part of its transaction execution arrangements, the Local Manager has an order execution policy in place that is designed to ensure that the Local Manager complies with its duty to obtain the best possible result when effecting a Transaction for one or more clients (the “Order Execution Policy”). This document is intended to provide the Local Manager’s clients with a summary of the Local Manager’s Order Execution Policy. Nothing herein is intended to place upon the Local Manager fiduciary or other duties or responsibilities over and above the specific obligations provided for in the investment management agreement between the Local Manager and a client.

  • Continuing Disclosure The Creditor may be required to provide you with regular statements. The statements will give you information about your account. Statements will be provided every six months if required. What Could Happen if You Fail to Meet Your Commitments: Security interestThe Creditor has an interest in the property listed below to secure performance of your obligations under the contract, or the payment of money payable under the contract, or both. If you fail to meet your commitments under the contract, including by granting a security interest over this property to another person, then to the extent of the security interest, the Creditor may be entitled to repossess and sell this property. If the sale of the property does not cover the whole of your liability to the Creditor, you will remain liable for the shortfall.Make: Model: Year: Registration No.: _ Chassis / Serial No.: Vin No: Colour: _ Default Interest Charges and Default FeesIn the event of a default in payment and while the default continues you must pay the Default Interest Charges. In the event of a breach of the contract or on the enforcement of the contract, the Default Fees specified below are payable. Your credit contract allows the Creditor to vary these fees and charges. Default Interest ChargesDefault interest is calculated at the rate of % per annum plus the annual interest rate referred to in the “Interest” section above. If you fail to make any payment (whether interest or otherwise) on the due date, you must, upon demand by the Creditor, pay the Creditor default interest on the overdue amount from the due date until the date that the Creditor receives full payment of that overdue amount. Default Fees $ dishonour fee, in respect of each payment which is dishonoured, or for which an automatic payment fails. The fee is payable and will be debited to your account at the time the relevant payment was due. $ late payment fee, in respect of each payment which is not made on its due date and remains outstanding for seven days after its due date. The fee is payable and will be debited to your account seven days after the due date for payment. $ repossession action fee, in respect of the Creditor commencing repossession of the Goods. The fee is payable and will be debited to your account at the time such repossession is commenced. $ post repossession fee. The fee is payable and will be debited to your account after realisation of the Goods or abandonment of realisation.An early repayment recovery amount as described in the “Full Prepayment” section below may be payable by you on the enforcement of the contract on demand by the Creditor. The method for calculating the early repayment recovery amount is further described in the General Conditions (Consumer).Costs incurred by the Creditor in connection with the enforcement of, taking advice on or taking any action pursuant to the contract, or otherwise in connection with the contract, are payable by you on demand by the Creditor on a full indemnity basis.

  • Accuracy of Representations and Warranties The representations and warranties of Purchaser contained in this Agreement shall have been true in all material respects on the date hereof and shall be true in all material respects on and as of the Closing Date with the same force and effect as though made on and as of the Closing Date.

  • Accuracy of Representations and Warranties and Compliance with Obligations The representations and warranties of Purchaser contained in this Agreement shall be true and correct in all material respects at and as of the Closing Date with the same force and effect as though made at and as of that time except: (i) for changes specifically permitted by or disclosed pursuant to this Agreement; and (ii) that those representations and warranties which address matters only as of a particular date shall remain true and correct as of such date. Purchaser shall have performed and complied in all material respects with all of its obligations required by this Agreement to be performed or complied with at or prior to the Closing Date. Purchaser shall have delivered to the Sellers a certificate, dated as of the Closing Date, and signed by an executive officer thereof, certifying that such representations and warranties are true and correct, and that all such obligations have been performed and complied with, in all material respects.

  • Disclosure Updates Promptly and in no event later than 5 Business Days after obtaining knowledge thereof, notify Agent if any written information, exhibit, or report furnished to the Lender Group contained, at the time it was furnished, any untrue statement of a material fact or omitted to state any material fact necessary to make the statements contained therein not misleading in light of the circumstances in which made. The foregoing to the contrary notwithstanding, any notification pursuant to the foregoing provision will not cure or remedy the effect of the prior untrue statement of a material fact or omission of any material fact nor shall any such notification have the effect of amending or modifying this Agreement or any of the Schedules hereto.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!