Dedicated Transport A DS0-, DS1-, or DS3-capacity transmission facility between Verizon switches (as identified in the LERG) or UNE Wire Centers, within a LATA, that is dedicated to a particular end user or carrier. Dedicated Transport is sometimes referred to as dedicated interoffice facilities ("IOF"). Dedicated Transport does not include any facility that does not connect a pair of Verizon UNE Wire Centers.
Power Factor Design Criteria (Reactive Power A wind generating plant shall maintain a power factor within the range of 0.95 leading to 0.95 lagging, measured at the Point of Interconnection as defined in this LGIA, if the ISO’s System Reliability Impact Study shows that such a requirement is necessary to ensure safety or reliability. The power factor range standards can be met using, for example without limitation, power electronics designed to supply this level of reactive capability (taking into account any limitations due to voltage level, real power output, etc.) or fixed and switched capacitors if agreed to by the Connecting Transmission Owner for the Transmission District to which the wind generating plant will be interconnected, or a combination of the two. The Developer shall not disable power factor equipment while the wind plant is in operation. Wind plants shall also be able to provide sufficient dynamic voltage support in lieu of the power system stabilizer and automatic voltage regulation at the generator excitation system if the System Reliability Impact Study shows this to be required for system safety or reliability.
Step No 1 – Any regular employee who has a grievance shall present the grievance verbally to his Supervisor and will be accompanied by a Xxxxxxx. The Supervisor shall state his decision verbally within three (3) working days of such meeting. If this verbal decision does not satisfactorily adjust the grievance, it may be appealed to Step 2 following. Step No. 2 – Notice of appeal must be made within seven (7) working days of the verbal decision, in writing, in triplicate, on forms supplied by the Union, and signed by the aggrieved employee and two members of the Grievance Committee. It shall be appropriately dated showing the date of the grievance, particulars of the incident giving rise to the grievance, the Article and Section of the Collective Agreement alleged to have been violated, the date of the submission, as well as the corrective action requested of the Company, and shall be presented to local management designated to handle Step 2. Within five (5) working days of receipt of the appeal or within any agreed upon extension, local management designated to handle Step 2 will meet with up to two (2) members of the Grievance Committee in an attempt to resolve the grievance. A written decision shall be given by local management designated to handle Step 2 within five (5) working days of the date of such meeting. If this written decision does not satisfactorily adjust the grievance, it may be appealed to Step 3 following. Step No. 3 – Notice of appeal must be given in writing by dating and signing the grievance forms within ten (10) working days from the written decision of local management, or their designate, through the Manager, Labour and Employment Relations, setting forth the areas or points of disagreement with the Step 2 written decision. The Manager, Labour and Employment Relations, will arrange a Management Committee to meet with up to two (2) members of the Grievance Committee and the Local President, or Bargaining Unit Chairperson, or his/her designated alternate, within seven (7) working days or a time mutually agreed upon. The two committees jointly will discuss the grievance and may request the attendance of any person or persons interested or involved. The Management Committee will render its decision in writing within seven (7) working days from the date of such meeting to the Local or Bargaining Unit. If the Committee’s decision does not bring about a satisfactory settlement, the grievance may be referred by either party to arbitration as provided for in Article 8.
ENVIRONMENTAL ATTRIBUTES AND NYS EXECUTIVE ORDER NO. 4 New York State is committed to environmental sustainability and endeavors to procure products with reduced environmental impact. One example of this commitment may be found in Executive Order No. 4 (Establishing a State Green Procurement and Agency Sustainability Program), which imposes certain requirements on state agencies, authorities, and public benefit corporations when procuring commodities, services, and technology. More information on Executive Order No. 4, including specifications for offerings covered by this Contract, may be found at xxxx://xxx.xx.xxx/EO/4/Default.asp. The Executive Order No. 4 specification for lubricating oil, high detergent, adopted in February 2009, for example, specifies that where lubricating oil with post-consumer material content is available at a competitive cost and meets the entity’s form, function and utility requirements, all affected state entities shall, to the maximum extent practicable, purchase lubricating oil that meets or exceeds a minimum percentage of post-consumer material content by weight of 55 percent. State entities subject to Executive Order No. 4 are advised to become familiar with the specifications that have been developed in accordance with the Order, and to incorporate them, as applicable, when making purchases under this Contract.
Preceptor Differential The Hospital shall pay a differential of $1.50 per hour to a nurse who is designated by nursing management to serve as a preceptor to provide on-the-job training to newly hired nurses. One differential will be paid per shift per orientee to the primary preceptor for all hours served as the primary preceptor for that shift. Preceptor will only be paid while the newly hired nurse is in a one-to-one status. Preceptor is a voluntary assignment and the nurse has the option to refuse the preceptor assignment.
NOISE/WASTE The Tenant agrees not to commit waste on the premises, maintain, or permit to be maintained, a nuisance thereon, or use, or permit the premises to be used, in an unlawful manner. The Tenant further agrees to abide by any and all local, county, and State noise ordinances.
Study Population Infants who underwent creation of an enterostomy receiving postoperative care and awaiting enterostomy closure: to be assessed for eligibility: n = 201 to be assigned to the study: n = 106 to be analysed: n = 106 Duration of intervention per patient of the intervention group: 6 weeks between enterostomy creation and enterostomy closure Follow-up per patient: 3 months, 6 months and 12 months post enterostomy closure, following enterostomy closure (12-month follow-up only applicable for patients that are recruited early enough to complete this follow-up within the 48 month of overall study duration).
Chemical Substances Supplier warrants that: (i) each chemical substance contained in Products is on the inventory of chemical substances compiled and published by the Environmental Protection Agency pursuant to the Toxic Substances Control Act and (ii) all Material Safety Data Sheets required to be provided by Supplier for Products shall be provided to DXC prior to shipment of the Products and shall be complete and accurate.
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (DAMLs), and may have up to 6,000 feet of bridged tap between the End User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For Loops less than 18,000 feet and with less than 1300 Ohms resistance, the Loop will provide a voice grade transmission channel suitable for Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point.
CONTRACT NO PB160AA Signature Page
