ACP emissions definition

ACP emissions means the sum of the VOC emissions from every ACP product subject to an ACP agreement approving an ACP, during the compliance period specified in the ACP agreement, expressed to the nearest pound of VOC and calculated according to the following equation:
ACP emissions means the sum of the VOC emissions from every ACP product subject to an Executive Order approving an ACP, during the compliance period specified in the Executive Order, expressed to the nearest pound of VOC and calculated according to the following equation
ACP emissions means the sum of the VOC emissions from every ACP

Examples of ACP emissions in a sentence

  • A detailed demonstration showing the combination of specific ACP reformulations or surplus trading (if applicable) that is sufficient to ensure that the ACP emissions will not exceed the ACP limit for each compliance period that the ACP will be in effect, the approximate date within each compliance period that such reformulations or surplus trading are expected to occur, and the extent to which the VOC contents of the ACP products will be reduced (i.e., by ACP reformulation).

  • An exceedance of the ACP limit has occurred when the ACP emissions, determined pursuant to subdivision 6 b (3) of this subsection, exceeds the ACP limit, determined pursuant to subdivision 6 b (4) of this subsection.

  • The responsible ACP party violates the requirements of the approved ACP, and the violation results in a shortfall that is 20% or more of the applicable ACP limit (i.e., the ACP emissions exceed the ACP limit by 20% or more).

  • Make sure that they face the right way, ready to receive the bearings.

  • The ACP emissions for the entire compliance period shall be the sum of the total maximum historical emissions, determined pursuant to subdivision 6 b (1) of this subsection, and the emissions determined pursuant to subdivision 6 b (2) of this subsection.

  • The ACP emissions for the entire compliance period shall be the sum of the total maximum historical emissions determined pursuant to subdivision 6 b (1) of this subsection, and the emissions determined pursuant to subdivision 6 b (2) of this subsection.

  • This demonstration shall use the equations specified in 9VAC5-45-420 C for projecting the ACP emissions and ACP limits during each compliance period.

  • We share the concerns raised by Arizona regarding the potential impact of relaxing ACP emissions requirements.

  • Because the reconfigured Guard Band A Block will now be located at 757–758/787–788 MHz between the Upper 700 MHz Band C and D Blocks, and will no longer be adjacent to public safety narrowband spectrum, the Commission concludes that it is no longer necessary to apply the adjacent channel power (ACP) emissions criteria to the A Block.

  • For each modification, the notification shall fully explain the following: 2.10.9.1.10 the nature of the modification; 2.10.9.1.11 the extent to which the ACP product formulation, VOC content, LVP content, or recommended usage directions will be changed; 2.10.9.1.12 the extent to which the ACP emissions and ACP limit specified in the ACP will be changed for the applicable compliance period; and 2.10.9.1.13 the effective date and corresponding date-codes for the modification.


More Definitions of ACP emissions

ACP emissions means the sum of the VOC emissions from every ACP product subject to an ACP, during the compliance period specified in the ACP, expressed to the nearest pound of VOC and calculated according to the following equation: where, where, For all products except for charcoal lighter material products: where,A = net weight of unit (excluding container and packaging); B = total weight of all VOCs per unit;C = total weight of all exempted VOCs per unit, as specified in 2.3.11 through 2.3.19 of this regulation. For charcoal lighter material products only: where, Certified Emissions = emissions levels for products specified 2.3.4.1 of this regulation; Certified Use Rate = see "Certified use rate" in 2.2 of this regulation.
ACP emissions means the sum of the VOC emissions from every ACP Product subject to an ACP Agreement approving an ACP, during the Compliance Period specified in the ACP
ACP emissions means the sum of the VOC emissions from every ACP product subject to an ACP agreement, during the compliance period specified in the ACP agreement, expressed to the nearest pound of VOC, and calculated according to the following equation: ACP Emissions = (Emissions)1 + (Emissions)2 + . . . + (Emissions)N where,‌

Related to ACP emissions

  • PM10 emissions means PM10 emitted to the ambient air as measured by an applicable reference method, or an equivalent or alternate method, specified in 40 CFR Part 51, Appendix M as of December 8, 1984, or by a test method specified in these regulations or any supplement thereto.

  • Exhaust emissions means the emission of gaseous, solid and liquid compounds from the tailpipe.

  • Actual emissions means the actual rate of emissions in tpy of any regulated pollutant (for fee calculation) emitted from a Part 71 source over the preceding calendar year. Actual emissions shall be calculated using each emissions unit’s actual operating hours, production rates, in-place control equipment, and types of materials processed, stored, or combusted during the preceding calendar year.

  • Evaporative emissions means the hydrocarbon vapours lost from the fuel system of a motor vehicle other than those from exhaust emissions;

  • Fugitive emissions means those emissions which could not reasonably pass through a stack, chimney, vent, or other functionally equivalent opening.

  • Emissions means the total emissions in tCO2 equivalent for a target period; “EU ETS Directive” means Directive 2003/87/EC of the European Parliament and of the Council establishing a scheme for greenhouse gas emissions allowance trading within the Community and amending Council Directive 96/61/EC, as amended from time to time;1

  • Secondary emissions means emissions which occur as a result of the construction or operation of a major stationary source or major modification, but do not come from the major stationary source or major modification itself. For the purposes of this chapter, “secondary emissions” must be specific, well-defined, and quantifiable, and must impact the same general areas as the stationary source modification which causes the secondary emissions. “Secondary emissions” includes emissions from any offsite support facility which would not be constructed or increase its emissions except as a result of the construction or operation of the major stationary source or major modification. “Secondary emissions” does not include any emissions which come directly from a mobile source, such as emissions from the tailpipe of a motor vehicle, from a train, or from a vessel.

  • Allowable emissions means the emission rate of a stationary source calculated using both the maximum rated capacity of the source, unless the source is subject to federally enforceable limits which restrict the operating rate or hours of operation, and the most stringent of the following:

  • Emissions unit means any part or activity of a stationary source that emits or has the potential to emit any regulated air pollutant or any pollutant listed under Section 7412(b) of the FCAA. This term is not meant to alter or affect the definition of the term "unit" for purposes of Title IV of the FCAA.

  • Continuous emissions monitoring system (CEMS means all of the equipment that may be required to meet the data acquisition and availability requirements of this section, to sample, condition (if applicable), analyze, and provide a record of emissions on a continuous basis.

  • Particulate matter emissions (PM) means the mass of any particulate material from the vehicle exhaust quantified according to the dilution, sampling and measurement methods as specified in this UN GTR.

  • Non-Methane Hydrocarbons (NMHC means the sum of all hydrocarbon air pollutants except methane.

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR Part 82 subpart G with supplemental tables of alternatives available at (http://www.epa.gov/snap/).

  • Explosives or munitions emergency response means all immediate response activities by an explosives and munitions emergency response specialist to control, mitigate, or eliminate the actual or potential threat encountered during an explosives or munitions emergency. An explosives or munitions emergency response may include in-place render-safe procedures, treatment or destruction of the explosives or munitions and/or transporting those items to another location to be rendered safe, treated, or destroyed. Any reasonable delay in the completion of an explosives or munitions emergency response caused by a necessary, unforeseen, or uncontrollable circumstance will not terminate the explosives or munitions emergency. Explosives and munitions emergency responses can occur on either public or private lands and are not limited to responses at RCRA facilities.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Continuous emissions monitoring system or “CEMS” means all of the equipment that may be required to meet the data acquisition and availability requirements of this chapter, to sample, to condition (if applicable), to analyze, and to provide a record of emissions on a continuous basis.

  • Small emissions unit means an emissions unit that emits or has the potential to emit the PAL pollutant in an amount less than the significant level for that PAL pollutant, as defined in section 140 or in the Act, whichever is lower.

  • Significant emissions unit means an emissions unit that emits or has the potential to emit a PAL pollutant in an amount that is equal to or greater than the significant level (as defined in section 140 or in the Act, whichever is lower) for that PAL pollutant, but less than the amount that would qualify the unit as a major emissions unit as defined in section 079.

  • Nominal tomographic section thickness means the full width at half-maximum of the sensitivity profile taken at the center of the cross-sectional volume over which x-ray transmission data are collected.