Architectural coatings definition

Architectural coatings means any coating to be applied to stationary structures and their appurtenances at the site of installation, to portable buildings at the site of installation, to pavements, or to curbs. This term shall not include the following: marine-based paints and coatings; coatings or materials to be applied to metal structures, such as bridges; or coatings or materials labeled and formulated for application in roadway maintenance activities.
Architectural coatings means any coating to be applied to stationary structures and their appurtenances at the site of installation, to portable buildings at the site of installation, to pavements, or to curbs. This term shall not include the following: marine-based paints and coatings;
Architectural coatings means coatings applied to stationary structures or their appurtenances at the site of installation, to portable buildings at the site of installation, to pavements, or to curbs. Coatings applied in shop applications or to non-stationary structures such as airplanes, ships, boats, railcars, and automobiles, and adhesives are not considered architectural coatings for the purposes of this rule.

Examples of Architectural coatings in a sentence

  • The CRP measures shall be following implemented to the satisfaction of County Building and Safety:a) Architectural coatings with Reactive Organic Compounds (ROC) shall not have content greater than 100 g/l.b) Architectural coating volume shall not exceed the significance threshold for ROG, which is 75 lbs.

  • Architectural coatings and paints are normally applied for aesthetics, protection or signage.

  • Architectural coatings subject to the Federal Insecticide, Fungicide and Rodenticide Act shall not be subject to the labeling requirements of this condition.

  • Architectural coatings are a large source of volatile organic compound (VOC) emissions in MBARD, accounting for about 2.35 tons/day or 868.7 tons/year in 2012.1 Architectural coatings are products that are applied to stationary structures and their accessories.

  • Architectural coatings are applied to stationary structures and their accessories.

  • Indirect sources are contributors to air pollution and include facilities and land uses which may not emit a significant amount of pollution themselves, but are responsible for indirect emissions, such as: • Motor vehicle trips attracted to or generated by the land use;• On-site combustion of natural gas, propane and wood for heating;• Architectural coatings and consumer products; and,• Landscape maintenance.

  • Architectural coatings are used for aesthetics, for protection, and for labeling on stationary structures such as buildings, fences, and roadways.

  • Architectural coatings, like other “stationary sources” of emissions in California, are regulated by the individual air pollution control agencies (districts), although the ARB does provide technical assistance and in 1989 approved an architectural coatings “suggested control measure” for use by districts.

  • Architectural coatings would also not be required, as the prefabricated signs, pole trim, and sheet metal skirt would come factory coated.

  • General Equation for Application Emissions VOCann = ∑CL OTC ST * PSST * CF Where:VOCann = Total annual VOC emissions from all coatings usage (lbs/yr) CLOTC ST = Coating VOC content by coating Subtype (grams of VOC per liter) PSST = Annual Paint Shipments by coating Subtype by county (gal/yr) CF = Conversion Factor, g/liter (1/119.95) to lbs/galST = Architectural coatings Subtype An example depicting this calculation procedure is given in the box below.


More Definitions of Architectural coatings

Architectural coatings means any coating regulated in rule 1113 of the south coast air quality management district.
Architectural coatings. ( 建 築 塗 料 ) means any coatings that are applied to stationary structures and their appurtenances, to pavements or to kerbs; “below-ground wood preservatives” ( 地 下 木 料 防 腐 劑 ) means wood preservatives that are formulated for architectural use to protect below-ground wood; “bituminous coating materials” ( 瀝 青 塗 料 物 料 ) means black or brownish coating materials, soluble in carbon disulphide, consisting mainly of hydrocarbons and are obtained from natural deposits, or as residues from
Architectural coatings means coatings formulated and recommended for field application to stationary structures and their appurtenances, to portable buildings, to pavements, or to curbs.

Related to Architectural coatings

  • Architectural coating means a coating applied to stationary structures and their appurtenances, to mobile homes, to pavements, or to curbs.

  • Architectural services means those services described as the "practice of architecture," as defined in K.S.A. 74-7003, and amendments thereto.

  • Structural Engineer means the Engineer appointed or to be appointed from time to time by Promoter for the preparation of the structural design and drawings of the buildings .

  • Green building strategies means those strategies that minimize the impact of development on the environment, and enhance the health, safety and well-being of residents by producing durable, low-maintenance, resource-efficient housing while making optimum use of existing infrastructure and community services.

  • Engineering means the application of scientific knowledge for the design, control, or use of building structures, equipment, or apparatus.

  • Landscape architect means a person who holds a license to practice landscape architecture in the state of California Business and Professions Code, Section 5615.

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Architect/Engineer (A/E means a person registered as an architect pursuant to Tex. Occ. Code Ann., Ch. 1051, as a landscape architect pursuant to Tex. Occ. Code Ann., Ch. 1052, a person licensed as a professional engineer pursuant Tex. Occ. Code Ann., Ch. 1001, and/or a firm employed by Owner or Design-Build Contractor to provide professional architectural or engineering services and to exercise overall responsibility for the design of a Project or a significant portion thereof, and to perform the contract administration responsibilities set forth in the Contract.

  • Architectural Control Committee means and refer to that committee constituted under Article 4 hereof for the review of Development Plans (as hereinafter defined) and other functions.

  • Systems Engineering means preparing specifications, identifying and resolving interface problems, developing test requirements, evaluating test data, and supervising design.

  • Structural component means a component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).

  • Landscape waste means any vegetable or plant waste except garbage. The term includes trees, tree trimmings, branches, stumps, brush, weeds, leaves, grass, shrubbery, and yard trimmings.

  • Infrastructure Improvements means a street, road, sidewalk, parking facility, pedestrian mall, alley, bridge, sewer, sewage treatment plant, property designed to reduce, eliminate, or prevent the spread of identified soil or groundwater contamination, drainage system, waterway, waterline, water storage facility, rail line, utility line or pipeline, transit-oriented development, transit-oriented property, or other similar or related structure or improvement, together with necessary easements for the structure or improvement, owned or used by a public agency or functionally connected to similar or supporting property owned or used by a public agency, or designed and dedicated to use by, for the benefit of, or for the protection of the health, welfare, or safety of the public generally, whether or not used by a single business entity, provided that any road, street, or bridge shall be continuously open to public access and that other property shall be located in public easements or rights-of-way and sized to accommodate reasonably foreseeable development of eligible property in adjoining areas. Infrastructure improvements also include 1 or more of the following whether publicly or privately owned or operated or located on public or private property:

  • Landscape means an area, as perceived by people, whose character is the result of the action and interaction of natural and/or human factors;

  • Architectural Review Committee or “ARC” shall mean the architectural review committee established by the Organization to review plans submitted to the Organization for architectural review.

  • Energy Deviation(s) means the absolute value of the difference, in MWh, in any Settlement Interval between (a) the final accepted Bid (as defined in the CAISO Tariff) submitted for the Project for the hour of the Settlement Interval divided by the number of Settlement Intervals in the hour; and (b) Delivered Energy for the Settlement Interval.

  • Configuration means State-specific changes made to the Software without Source Code or structural data model changes occurring.

  • Industrial maintenance coating means a high performance architectural coating, including primers, sealers, undercoaters, intermediate coats, and topcoats formulated for application to substrates, including floors, exposed to one or more of the following extreme environmental conditions listed below and labeled “For industrial use only;” “For professional use only;” “Not for residential use;” or “Not intended for residential use.”

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • Layout means a conceptual drawing sufficient to provide for the specified stormwater management facilities required at the time of approval.

  • Interconnector means a transmission line which crosses or spans a border between Member States for the purpose of connecting the national transmission system of those Member States or a transmission line between a Member State and a third country up to the territory of the Member States or the territorial sea of that Member State;

  • Building Energy Benchmarking means the process of measuring a building’s Energy use, tracking that use over time, and comparing performance to similar buildings.

  • Specifications means the Specifications of the Works included in the Contract and any modification or addition made or approved by the Project Manager.

  • Cluster development means a contiguous cluster or

  • Structural pest control means a use requiring a license under Chapter 14 (commencing with Section 8500), Division 3, of the Business and Professions Code.

  • Infrastructure improvement means permanent infrastructure that is essential for the public health and safety or that: