Areas of Responsibility definition

Areas of Responsibility means the portion of the Center identified as the “Areas of Responsibility” in Exhibit B attached hereto and made a part hereof, which shall include during Phase I only the portions of the Train Platform Level and Lower Concourse initially included as part of the “Areas of Responsibility” shown in Exhibit B but shall exclude such portions of the Train Platform Level and Lower Concourse from and after substantial completion of Phase II.
Sample 1
Areas of Responsibility. Landlord shall maintain the entire building including: lobby, elevators, stairs, hallways and all office areas GENERAL CLEANING: The following services shall be performed: OFFICE AREAS - NIGHTLY: Empty all wastebaskets and containers and remove to a designated area. Replace basket liners if agreed. Empty, wash and wipe clean all ashtrays. Dust all desk tops, files, office equipment, picture frames, etc. within normal reach. Dry mop all resilient tile surfaces using chemically treated dry mops. Vacuum all non-obstructed carpeted areas. Vacuum all floor mats. Clean entrance door glass. Clean and sanitize drinking fountains. Remove fingerprints from walls, doors and light switches. High dusting, wall washing, basket washing and carpet cleaning will be performed at additional expense. LAVATORIES - NIGHTLY: Sweep and damp mop the floor using the proper disinfectants. Wash and polish all mirrors, powder shelves and bright work. Wash and disinfect all toilet bowls and urinals. Wash and wipe dry both sides of the toilet seats with an approved germicidal detergent leaving the seats in an upright position. Thoroughly dust all dispensers and partitions within normal reach. Wash and disinfect monthly. Refill all dispensers with bathroom supplies. Empty all trash receptacles and remove contents to a designated area. EXHIBIT C RULES AND REGULATIONS
Sample 1

Examples of Areas of Responsibility in a sentence

  • Observers should be willing to accept difficult living conditions when deployed in some Areas of Responsibility.

  • A volume of airspace as agreed between two ATS units, extending into the adjacent/subjacent Areas of Responsibility, within which airspace structure and related activities may have an impact on air traffic coordination procedures.

  • PostMain Functions and Areas of Responsibility Chief Executive (and Head of Paid Service) Overall corporate management and operational responsibility (including overall management responsibility for all officers).

  • HandlerTitle: Chairman and CEOBusiness Address: 520 Madison Avenue, New York, NY 10022 Business Background: Employed with Jefferies since 1990 Areas of Responsibility: DirectorNature of Duties: Chief Executive Officer Brian P.

  • For "Areas of Responsibility of the Faculty," see Appendix A; for committee functions, see Section 6.

  • FriedmanTitle: Chairman, Executive CommitteeBusiness Address: 520 Madison Avenue, New York, NY 10022 Business Background: Employed by Jefferies since 2001 Areas of Responsibility: DirectorNature of Duties: Firm management Peregrine C.

  • A volume of airspace as agreed between 2 ATS Units, extending into the adjacent/subjacent Areas of Responsibility, within which airspace structure and related activities may have an impact on air traffic co-ordination procedures.

  • Areas of Responsibility: COO and President of TSS.Duties: Mr. Korotkiy oversees all strategic and operational areas for TradeStation Group, Inc.

  • Areas of responsibility Sustainability and Climate Change Strategy Development PORTFOLIO FOR CORPORATE SERVICES AND PROJECTS Areas of Responsibility Improvement • Corporate Policy Architecture.• Development of the Corporate Plan.• Parish and Voluntary Sector development.

  • All information and paperwork as per Article 16.07 c) and e) or 16.10 d) and f) (Hours of Work, Activities and Areas of Responsibility) must be completed so as to allow the department/faculty to meet the monthly payroll deadline.

Related to Areas of Responsibility

  • Area of responsibility means the geographical area, as

  • Corporate Social Responsibility means Corporate Social Responsibility (CSR) as defined in Section 135 of the Companies Act, 2013 and Companies Corporate Social Responsibility Policy) Rules, 2014;

  • Financial responsibility means the ability to respond in damages for liability thereafter incurred

  • Customer Responsibilities means the responsibilities of the Customer set out in Call Off Schedule 4 (Implementation Plan) and any other responsibilities of the Customer in the Call Off Order Form or agreed in writing between the Parties from time to time in connection with this Call Off Contract;

  • Extended producer responsibility ’ (EPR) means responsibility of any producer of packaging products such as plastic, tin, glass, wrappers and corrugated boxes, etc., for environmentally sound management, till end-of-life of the packaging products ;

  • parental responsibility , in relation to a child, means all the duties, powers, responsibilities and authority which, by law, parents have in relation to children.

  • Proof of financial responsibility means proof of ability to respond in damages for liability, on account of accidents occurring after the effective date of the proof, arising out of the ownership, maintenance, or use of a motor vehicle, in the amount of twenty-five thousand dollars because of bodily injury to or death of one person in any one accident, and, subject to the limit for one person, in the amount of fifty thousand dollars because of bodily injury to or death of two or more persons in any one accident, and in the amount of twenty-five thousand dollars because of injury to or destruction of property of others in any one accident.

  • Official responsibility means administrative or operating authority, whether intermediate or final, to initiate, approve, disapprove or otherwise affect a procurement transaction, or any claim resulting therefrom.

  • Institutional Responsibilities means an Investigator’s professional responsibilities on behalf of the University, which may include for example: activities such as research, research consultation, teaching, professional practice, University committee memberships, and service on panels such as Institutional Review Boards or data and safety monitoring boards.

  • Responsibilities means the responsibilities delegated to BNY under the Rule as a Foreign Custody Manager with respect to each Specified Country and each Eligible Foreign Custodian selected by BNY, as such responsibilities are more fully described in Article III of this Agreement.

  • Responsibility means a duty for which a person is accountable by virtue of licensure.

  • Designated crisis responder means a mental health

  • Project Management Plan means the portion of the Project Development Plan providing the information requested in Section 4.2 of Exhibit B to the ITP.

  • Coordinator means the person designated by Canada to act as the Dispute Resolution Coordinator.

  • Design Criteria Professional means a firm who holds a current certificate of registration under Chapter 481 of the Florida Statutes, to practice architecture or landscape architecture, or a firm who holds a current certificate as a registered engineer under Chapter 471 of the Florida Statutes, to practice engineering, and who is employed by or under contract to the District to provide professional architect services, landscape architect services, or engineering services in connection with the preparation of the Design Criteria Package.

  • Scope of Services or “Scope of Work” means the work to be performed by the Proposer or Consultant as described in Section 2.0 of this RFP, as amended thereto.

  • Virginia Stormwater Management Program or “VSMP” means a program approved by the State Board after September 13, 2011, that has been established by a locality to manage the quality and quantity of runoff resulting from land-disturbing activities and shall include such items as local ordinances, rules, permit requirements, annual standards and specifications, policies and guidelines, technical materials, and requirements for plan review, inspection, enforcement, where authorized in this article, and evaluation consistent with the requirements of this article and associated regulations.

  • quality (functionality means the totality of features and characteristics of a product or service that bear on its ability to satisfy stated or implied needs F.1.4 Communication and employer’s agentEach communication between the employer and a tenderer shall be to or from the employer's agent only, and in a form that can be read, copied and recorded. Writing shall be in the English language. The employer shall not take any responsibility for non-receipt of communications from or by a tenderer. The name and contact details of the employer’s agent are stated in the tender data. F.1.5 The employer’s right to accept or reject any tender offer F.1.5.1 The employer may accept or reject any variation, deviation, tender offer, or alternative tender offer, and may cancel the tender process and reject all tender offers at any time before the formation of a contract. The employer shall not accept or incur any liability to a tenderer for such cancellation and rejection, but will give written reasons for such action upon written request to do so. F.1.5.2 The employer may not subsequent to the cancellation or abandonment of a tender process or the rejection of all responsive tender offers re-issue a tender covering substantially the same scope of work within a period of six months unless only one tender was received and such tender was returned unopened to the tenderer. F.2 Tenderer’s obligations F.2.1 EligibilitySubmit a tender offer only if the tenderer satisfies the criteria stated in the tender data and the tenderer, or any of his principals, is not under any restriction to do business with employer. F.2.2 Cost of tenderingAccept that the employer will not compensate the tenderer for any costs incurred in the preparation and submission of a tender offer, including the costs of any testing necessary to demonstrate that aspects of the offer satisfy requirements. F.2.3 Check documentsCheck the tender documents on receipt for completeness and notify the employer of any discrepancy or omission. F.2.4 Confidentiality and copyright of documentsTreat as confidential all matters arising in connection with the tender. Use and copy the documents issued by the employer only for the purpose of preparing and submitting a tender offer in response to the invitation. F.2.5 Reference documentsObtain, as necessary for submitting a tender offer, copies of the latest versions of standards, specifications, conditions of contract and other publications, which are not attached but which are incorporated into the tender documents by reference. F.2.6 Acknowledge addendaAcknowledge receipt of addenda to the tender documents, which the employer may issue, and if necessary apply for an extension to the closing time stated in the tender data, in order to take the addenda into account. F.2.7 Clarification meetingAttend, where required, a clarification meeting at which tenderers may familiarize themselves with aspects of the proposed work, services or supply and raise questions. Details of the meeting(s) are stated in the tender data. F.2.8 Seek clarificationRequest clarification of the tender documents, if necessary, by notifying the employer at least five working days before the closing time stated in the tender data. F.2.9 InsuranceBe aware that the extent of insurance to be provided by the employer (if any) might not be for the full cover required in terms of the conditions of contract identified in the contract data. The tenderer is advised to seek qualified advice regarding insurance. F.2.10 Pricing the tender offer F.2.10.1 Include in the rates, prices, and the tendered total of the prices (if any) all duties, taxes (except Value Added Tax (VAT), and other levies payable by the successful tenderer, such duties, taxes and levies being those applicable 14 days before the closing time stated in the tender data. F2.10.2 Show VAT payable by the employer separately as an addition to the tendered total of the prices.

  • Stormwater management planning area means the geographic area for which a stormwater management planning agency is authorized to prepare stormwater management plans, or a specific portion of that area identified in a stormwater management plan prepared by that agency.

  • Quality Management Plan means the portion of the Project Development Plan providing the information requested in Section 4.3 of Exhibit B to the ITP.

  • Virginia Stormwater Management Program authority or "VSMP authority" means an authority approved by the State Board after September 13, 2011, to operate a Virginia Stormwater Management Program.

  • Stormwater management measure means any practice, technology, process, program, or other method intended to control or reduce stormwater runoff and associated pollutants, or to induce or control the infiltration or groundwater recharge of stormwater or to eliminate illicit or illegal non-stormwater discharges into stormwater conveyances.

  • Stormwater management plan means the set of drawings and other documents that comprise all the information and specifications for the programs, drainage systems, structures, BMPs, concepts and techniques intended to maintain or restore quality and quantity of stormwater runoff to pre-development levels.

  • Basic health plan services means that schedule of covered

  • Program Manager means the HCAI manager responsible for the grant program.

  • Municipal Separate Storm Sewer System Management Program means a management program covering the duration of a state permit for a municipal separate storm sewer system that includes a comprehensive planning process that involves public participation and intergovernmental coordination, to reduce the discharge of pollutants to the maximum extent practicable, to protect water quality, and to satisfy the appropriate water quality requirements of the CWA and regulations, and this article and its attendant regulations, using management practices, control techniques, and system, design, and engineering methods, and such other provisions that are appropriate.