Building modification definition

Building modification means any change to an existing building's configuration that may result in the increase in wastewater flows or change in the wastewater characteristics.
Sample 1Sample 2Sample 3
Building modification means any modification, addition, alteration or exterior colour change made on or to an existing building or structure on:
Sample 1
Building modification means any modification, addition, alteration or exterior colour change made on or
Sample 1

Examples of Building modification in a sentence

  • Should Tenant perform any Alterations work that would necessitate any ancillary Building modification or other expenditure by Landlord, then Tenant shall promptly fund the cost thereof to Landlord.

  • Should Tenant perform any work that would necessitate any ancillary Building modification or other expenditure by Landlord, then Tenant shall promptly fund the cost thereof to Landlord.

  • Should Landlord approve work that would necessitate any ancillary Building modification or other expenditure by Landlord, then except to the extent of any remaining balance of the “Landlord Contribution” as described below, Tenant shall, in addition to its other obligations herein, promptly fund the cost thereof to Landlord.

  • Building modification measuresBear in mind that procurements of movable investment assets may require building modifications (e.g. climate-control technology).

  • Should Landlord approve work that would necessitate any ancillary Building modification or other expenditure by Landlord, then except to the extent of any remaining balance of the “Landlord Contribution”, Tenant shall, in addition to its other obligations herein, promptly fund the cost thereof to Landlord.

  • Should Landlord approve work that would necessitate any ancillary Building modification or other expenditure by Landlord, then except to the extent of any remaining balance of the "Landlord's Contribution" as described below, Tenant shall, in addition to its other obligations herein, promptly fund the cost thereof to Landlord.

  • Building modification for the district and family courtrooms are near completion.

  • If Landlord modifies the Building as set forth in Section 1.8, then the base MMR will be increased to Sixty Eight Thousand One Hundred Seventy Three and 56/100 ($68,173.56) upon the earlier of (i) the date Landlord substantially completes the Building modification, or (ii) Tenant has access to the Building.

  • If the Landlord modifies the Building to provide internal roof clearance of at least 40’, then Tenant will pay the increased Minimum Monthly Rent set forth in Section 1.9 upon the earlier of (i) the date Landlord substantially completes the Building modification, or (ii) Tenant has access to the Building.

  • Should Landlord approve work that would necessitate any ancillary Building modification or other expenditure by Landlord, then except to the extent of any remaining balance of the Landlord Contribution, Tenant shall, in addition to its other obligations herein, promptly fund the cost thereof to Landlord.

Related to Building modification

  • Servicing Modification Any reduction of the interest rate on or the outstanding principal balance of a Mortgage Loan, any extension of the final maturity date of a Mortgage Loan, and any increase to the outstanding principal balance of a Mortgage Loan by adding to the Stated Principal Balance unpaid principal and interest and other amounts owing under the Mortgage Loan, in each case pursuant to a modification of a Mortgage Loan that is in default, or for which, in the judgment of the Master Servicer, default is reasonably foreseeable in accordance with Section 3.07(a).

  • Building Drain means that part of the lowest horizontal piping of a drainage system which receives the discharge from soil, waste, and other drainage pipes inside the walls of the building and conveys it to the building sewer, beginning five (5) feet (1.5 meters) outside the inner face of the building wall.

  • Minor modification means a modification that does not significantly alter the nongovernmental function or purpose of the software or is of the type customarily provided in the commercial marketplace.

  • Major modification means any physical change in or change in the method of operation of a major stationary source that would result in a significant emissions increase of a regulated NSR pollutant and a significant net emissions increase of that pollutant from the major stationary source.

  • Building Square Footage or "BSF" means the square footage of assessable internal living space of a Unit, exclusive of any carports, walkways, garages, overhangs, patios, enclosed patios, detached accessory structure, other structures not used as living space, or any other square footage excluded under Government Code Section 65995 as determined by reference to the Building Permit for such Unit.

  • Permit modification means a revision to a Title V operating permit that cannot be accomplished under the provisions for administrative permit amendments found at rule 567—22.111(455B). A permit modification for purposes of the acid rain portion of the permit shall be governed by the regulations pertaining to acid rain found at rules 567—22.120(455B) to 567—22.147(455B). This definition of “permit modification” shall be used solely for purposes of this chapter governing Title V operating permits.

  • Substantial modification means modification of a relevant source that results in a significant increase in emissions, excluding any change in emissions resulting from by-product recovery. It shall be a matter for the Party to decide whether a modification is substantial or not;

  • Significant Modification As defined in Section 3.25.

  • Premises Building Total Destruction means if the Building of which the Premises are a part is damaged or destroyed to the extent that the cost to repair is fifty percent (50%) or more of the then Replacement Cost of the Building.

  • Required Modification shall have the meaning specified in Section 8.1 of the Facility Lease.

  • Major Alteration means change other than repair or replacement of building materials or equipment with materials and equipment of a similar type.

  • Building Height means the vertical distance measured in the case of flat roofs, from the average level of the center line of the adjoining street to the highest point of the building adjacent to the street; and in the case of pitched roofs, up to the point where the external surface of the outer wall intersects the finished surface of the sloping roof and in the case of gables facing the road, the midpoint between the eaves level and the ridges:

  • Building Work has the meaning given to it in section 6 of the Building and Construction Industry (Improving Productivity) Act 2016 (Cth);

  • Tenant Improvements Defined in Exhibit B, if any.

  • Square Footage means the total gross horizontal areas of all floors, including usable basement and cellars, below the roof and within the outer surface of the main walls of buildings (or the center lines of party walls separating such buildings or portions thereof) or within lines drawn parallel to and two feet within the roof line of any building or portion thereof without walls (which includes, notwithstanding paragraph 3 below, the square footage of all porches), and including pedestrian access walkways or corridors, but excluding the following:

  • Building Standard means the type, grade, brand, quality and/or quantity of materials Landlord designates from time to time to be the minimum quality and/or quantity to be used in the Building.

  • Structural alteration means an Alteration that (i) will result in a change in the footprint of the Improvements, (ii) involves the addition of one or more floors to the Improvements, (iii) affects the structural elements or any exterior walls of the Improvements, (iv) decreases the rentable square footage of the Leased Premises other than to a de minimis extent or (v) adversely affects the proper functioning and/or capacity of the building systems in the Improvements.

  • Rentable Area of Premises on Page 1 of the Lease shall be deleted in their entirety and replaced with the following:

  • Alterations means all changes, additions, improvements or repairs to, all alterations, reconstructions, renewals, replacements or removals of and all substitutions or replacements for any of the Improvements or Equipment, both interior and exterior, structural and non-structural, and ordinary and extraordinary.

  • Building Area means the greatest horizontal area of a building within the outside surface of the exterior walls.

  • Rentable Area of the Premises The amount of square footage set forth in Section 1.01(10).

  • Contract Modification means any changes in the terms or provisions of the Contract which are reduced to writing and fully executed by both parties.

  • Base Building shall include the structural portions of the Building, the public restrooms and the Building mechanical, electrical and plumbing systems and equipment located in the internal core of the Building on the floor or floors on which the Premises are located. Tenant shall promptly provide Landlord with copies of any notices it receives regarding an alleged violation of Law. Tenant shall comply with the rules and regulations of the Building attached as Exhibit E and such other reasonable rules and regulations adopted by Landlord from time to time, including rules and regulations for the performance of Alterations (defined in Section 9).

  • Permitted Modification shall have the meaning ascribed thereto in Section 4.02.

  • Material Alteration shall have the meaning set forth in Section 4.1.11.

  • Building, structure, facility, or installation means all of the pollutant-emitting activities which belong to the same industrial grouping, are located on one or more contiguous or adjacent properties, and are under the control of the same person (or persons under common control) except the activities of any vessel. Pollutant-emitting activities shall be considered as part of the same industrial grouping if they belong to the same major group (i.e., which have the same two-digit code) as described in the Standard Industrial Classification Manual, 1972, as amended by the 1977 Supplement (U.S. Government Printing Office stock numbers 4101-0066 and 003-005-00176-0, respectively).