Casing Pipe definition

Casing Pipe means a permanent pipe installed by MTBM methods which serves as a casing or secondary pipe around a smaller diameter carrier pipe;
Casing Pipe. A section of continuous pipe installed under a road, railroad, stream, or over or under other utilities or obstruction through which the cable, conduit, and other system components shall be placed.
Casing Pipe means a pipe used for Bores over six inches (6”) in diameter, which carries the pipe, Conduit, wires, or cables being constructed. Casing Pipe for Jack and Auger Boring shall be steel. Casing Pipe for other Bores may be HDPE, restrained joint PVC, or other materials as approved by the Superintendent.

Examples of Casing Pipe in a sentence

  • Horizontal Boring and Inserting Casing Pipe with rope (material – HDPE of pressure rating 4 Kg/cm²) along road and under railway/road/canals/streams crossing in all types of soil at prescribed depth, including all civil works & reinstatement as per BMP standards.

  • Horizontal Boring and Inserting Casing Pipe with rope (material – HDPE of pressure rating 4 Kg/cm²) along road and under railway/road/canals/streams crossing in all type of soils at prescribed depth, including all civil works & reinstatement as per BBMP standards.

  • Accepted Rates for Supply of ISI Marked Plain Ended M.S. ERW Casing Pipe conforming to IS: 4270/2001 Grade FE-410 in random length of 4 to 7 Meter and 125 x 3 Meters Length.

  • Table 5.2.4.1.1 Minimum Wall Thickness for Steel Casing Pipe for E 72 Loading Nominal Nominal Thickness Diameter inches (mm) inches (mm) 0.188 (5.0) 14 (Under 350) 0.219 (5.5) ....................................................

  • Labor, equipment and materials, including but not limited to end seals, nuts, bolts, gaskets, banding, or other associated hardware shall be considered incidental to the installation of the (RJ or Steel) Casing Pipe TEMPORARY SANITARY SEWER BYPASS SYSTEM A.

  • Labor, equipment and materials, including but not limited to casing spacers, nuts, bolts, gaskets, banding, or other associated hardware shall be considered incidental to the installation of the (RJ or Steel) Casing Pipe.

  • Refer to section 3.15 of these Criteria and construction specification Section 02445, Casing Pipe – Borings and Encasements for typical non-potable irrigation main and service encasement requirements.

  • Refer to 3.16 of these Criteria and construction specification Section 02445, Casing Pipe – Borings and Encasements for sanitary sewer main boring requirements.

  • Table 16Steel Carrier Pipe Casing Pipe Diameter Spacing between Pipes Height Length Catalogue Reference NumberNominal DiameterExternal DiameterNote: 1.

  • Table 17Steel Carrier Pipe Casing Pipe Diameter Spacing between Pipes Height Length Catalogue Reference NumberNominal DiameterExternal DiameterNote: 1.

Related to Casing Pipe

  • CO2 means carbon dioxide.

  • Pipelines has the meaning set forth in the Recitals.

  • Asphalt means a dark brown to black cement-like material (solid, semisolid, or liquid in consistency) in which the predominating constituents are bitumens which occur in nature as such or which are obtained as residue in refining petroleum.

  • Pipeline means any pipe, pipes, or pipelines used for the intrastate transportation or transmission of any solid, liquid, or gaseous substance, except water.

  • Gathering System means that portion of Gatherer’s pipeline system, including all appurtenances thereto, related to the provision of gathering and transportation services provided by Gatherer pursuant to this tariff.

  • Infiltrative surface means designated interface where effluent moves from distribution media or a distribution product into treatment media or original soil. In standard trench or bed systems this will be the interface of the distribution media or product and in-situ soil. Two separate infiltrative surfaces will exist in a mound system and an unlined sand filter, one at the interface of the distribution media and fill sand, the other at the interface of the fill sand and in-situ soil.

  • Bottled water means water that is placed in a safety sealed container or package for human 696 consumption. Bottled water is calorie free and does not contain sweeteners or other additives except 697 that it may contain: (i) antimicrobial agents; (ii) fluoride; (iii) carbonation; (iv) vitamins, minerals, and 698 electrolytes; (v) oxygen; (vi) preservatives; and (vii) only those flavors, extracts, or essences derived 699 from a spice or fruit. "Bottled water" includes water that is delivered to the buyer in a reusable 700 container that is not sold with the water.

  • Casing means a pipe or tubing of appropriate material, of varying diameter and weight, lowered into a borehole during or after drilling in order to support the sides of the hole and thus prevent the walls from caving, to prevent loss of drilling mud into porous ground, or to prevent water, gas, or other fluid from entering or leaving the hole.

  • Water Surface Elevation (WSE means the height, in relation to NAVD 1988, of floods of various magnitudes and frequencies in the floodplains of riverine areas.

  • Ground water means water below the land surface in a zone of saturation.

  • Flash point means the lowest temperature of a liquid at which its vapours form a flammable mixture with air;

  • Receipt Point means the receipt/inception point(s) where Crude Oil is received into the Gathering System, as such points are specified in Section II of this tariff.

  • Drilling unit means the area fixed for the drilling of one well by order or rule of any state or federal body having authority. If a Drilling Unit is not fixed by any such rule or order, a Drilling Unit shall be the drilling unit as established by the pattern of drilling in the Contract Area unless fixed by express agreement of the Drilling Parties.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Feedstock Gas means natural gas used as a raw material for its chemical properties in creating an end product.

  • Supply Pipe means any part of a service pipe which a water undertaker could not be, or have been required to lay under section 46 of the Water Industry Act 1991; and

  • Horizontal well means a well bore drilled laterally at an angle of at least eighty (80) degrees to the vertical or with a horizontal projection exceeding one hundred (100) feet measured from the initial point of penetration into the productive formation through the terminus of the lateral in the same common source of supply.

  • Reid vapor pressure means the vapor pressure of crude oil or other volatile petroleum products at 100 degrees Fahrenheit as determined by the latest edition of ASTM D6377 (RVPE): Standard Test Method for Determination of Vapor Pressure of Crude Oil.

  • Water surface elevation means the height, in relation to the National Geodetic Vertical Datum (NGVD) of 1929, the North American Vertical Datum (NAVD) of 1988, or other datum, where specified, of floods of various magnitudes and frequencies in the floodplains of riverine areas.

  • Submerged fill pipe means any fill pipe the discharge opening of which is entirely submerged when the liquid level is six inches above the bottom of the tank, or when applied to a tank which is loaded from the side, shall mean any fill pipe the discharge opening of which is entirely submerged when the liquid level is eighteen inches above the bottom of the tank.

  • Underground storage tank or “UST” means any one or combination of tanks (including underground pipes connected thereto) that is used to contain an accumulation of regulated substances, and the volume of which (including the volume of underground pipes connected thereto) is 10 percent or more beneath the surface of the ground. This term does not include any:

  • Pipe or “Piping” means a hollow cylinder or tubular conduit that is constructed of non-earthen materials.

  • LNG means liquefied natural gas.

  • Deep well means a well located and constructed in such a manner that there is a continuous layer of low permeability soil or rock at least 5 feet thick located at least 25 feet below the normal ground surface and above the aquifer from which water is to be drawn.

  • Receipt Point(s) means the receipt points set forth in Section 6 of this Toll Schedule.

  • Bulk gasoline terminal means a gasoline storage facility which receives gasoline from its supply source primarily by pipeline, ship, or barge, and delivers gasoline to bulk gasoline plants or to commercial or retail accounts primarily by tank truck; and has an average daily throughput of more than 76,000 liters (20,000 gallons) of gasoline.