Composite Sampling definition

Composite Sampling means a representative sample of Grain prepared by mixing together samples drawn from the relevant Transportation Vehicle or Cells. Confidential Information means information exchanged between Viterra and the Client in relation to the business of those persons that:
Sample 1Sample 2Sample 3
Composite Sampling means a single sample for laboratory analysis composed of multiple, well- blended point- or sub-samples uniformly distributed throughout the entire volume that, after mixing, accurately represents an average or median value of the property or trait of interest for a batch or general mass of compost.
Sample 1Sample 2Sample 3
Composite Sampling means a collection of a number of discrete sample aliquots obtained through flow- proportional samples, at constant time intervals between samples and composites for analysis. Composite sampling techniques shall be performed in accordance with Appendix E to 40 CFR Part 403.
Sample 1Sample 2

Examples of Composite Sampling in a sentence

  • Guide D6051-96(2001) Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities.

  • Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities, Designation D-6051-96, American Society for Testing and Materials, December 1996.

  • Organism Identification:Procedures follow those outlined in the methods for kick sampling above.9.4.6 Lakes Composite Sampling for Benthic Macroinvertebrates Macroinvertebrate sampling in lakes is used to provide an additional means of linking water quality to aquatic life.

  • Composite samples may be collected by one of the following methods:Time Composite Sampling is used to provide representative samples when the flow rate of the sampled stream is relatively constant.

  • Composite Sampling: A Novel Method to Accomplish Observational Economy in Environmental Studies.Springer.

  • Bicycle Parking and Transit The proposed project includes the installation of bike racks near the bar’s front entry (Attachment B).

  • Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities.” West Conshohocken, PA: American Society for Testing and Materials, 1996.

  • Field Application of Emerging Composite Sampling Methods, EPA/600/R-17/212.

  • Composite Sampling Schedule As soon as possible but not later than the dates included in the following schedule, the permittee shall begin collecting 24-hour flow proportional composite samples at stations 001 and 601 as required by this NPDES permit.

  • Racin, 1997, “Flume Calibration Process for Continuous Composite Sampling of Non-Point Runoff”, Proceedings of the Heat Transfer and Fluid Mechanics Institute, May 29-30.


More Definitions of Composite Sampling

Composite Sampling means a mixture of a minimum of two and a maximum of three grab samples to represent the average properties of the hazardous substances of concern at the extent of the area sampled.
Sample 1
Composite Sampling means a collection of a number of discrete sample aliquots obtained through flow-proportional
Sample 1
Composite Sampling means the process(es) used to check for the presence of drug residue in a unit.
Sample 1
Composite Sampling means an economical, but less specific, method of sampling for lead-based paint hazards by analyzing dust from several surfaces or soil from different locations together.
Sample 1

Related to Composite Sampling

  • Composite sample means a combination of individual samples of wastewater taken at 1 hour intervals, for eight (8) hours (or for the duration of discharge, whichever is less), to minimize the effect of variability of the individual samples. Individual samples must be of equal volume. (Example: one (1) liter per hour.)

  • Sampler means a person who is employed by or is an owner of a licensed laboratory, grower, or processor and is authorized by that employer to collect samples in accordance with the testing laboratory's standard operating procedures and these Rules.

  • Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.

  • Sampling means the distribution of samples to members of the general public in a public place.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Assay means a laboratory analysis of Crude Petroleum to include the following: A.P.I. Gravity, Reid vapor pressure, composition, pour point, water and sediment content, sulfur content, viscosity, distillation, hydrogen sulfide, flash/boiling point and other characteristics as may be required by Carrier.

  • Semisolid means a product that, at room temperature, will not pour, but will spread or deform easily, including but not limited to gels, pastes, and greases.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Bottle means any vessel intended to contain liquids and having a capacity of not more than 43

  • Feed means feed as defined in point (4) of Article 3 of Regulation (EC) No 178/2002;

  • Sterilization means the procedure that kills all microorganisms, including their spores.

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Anaerobic digester means a liquid manure storage area that is constructed with the intent to capture and combust gas emissions resulting from the digestion of waste by microbes in anaerobic conditions. An anaerobic digester is a LMSA and is required to comply with all requirements applicable to LMSAs. Requirements specific to anaerobic digesters will be noted when applicable.

  • Process Wastewater means any water which, during manufacturing or processing, comes into direct contact with or results from the production or use of any raw material, intermediate product, finished product, by-product, or waste product.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • DNA sample means any material that has come from a human body and consists of or includes human cells;

  • Tailings means material rejected from a mill after most of the valuable minerals have been extracted.

  • embedded generator means a generator who is not a market participant and whose generation facility is connected to a distribution system of a distributor, but does not include a generator who consumes more electricity than it generates;

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Quarterly (1/Quarter) sampling frequency means the sampling shall be done in the months of March, June, August, and December, unless specifically identified otherwise in the Effluent Limitations and Monitoring Requirements table.