Conformance testing definition

Conformance testing means testing or other activities that determine whether a process, product, or service complies with the requirements of a specification, technical standard, contract, or regulation.
Sample 1Sample 2Sample 3
Conformance testing means the testing of the Members’ systems to ensure, inter-alia, the required levels of functionality, connectivity and ability to interact are achieved in accordance with relevant Euronext Policy and applicable law and regulation.
Sample 1Sample 2
Conformance testing means the testing and acceptance procedures for the Products as agreed to by the parties and incorporated into an Appendix from time to time.
Sample 1Sample 2

Examples of Conformance testing in a sentence

  • OEMs or OD Device Developers (collectively, “DEVELOPER,”) requesting Verizon Wireless’ (VZW) certification for LTE capable Devices must receive GCF certification before OD Conformance testing can commence.

  • All Devices must be type approved and certified by the United States Federal Communications Commission (FCC) and classified by the Department of Commerce's Bureau of Industry and Security (BIS) before Open Development (OD) Conformance testing can commence.

  • Conformance testing deals with the behaviour of the protocol, and not with processing capacity under critical load conditions.

  • Conformance testing methodology standards may specify physical test requirements, logical test requirements (e.g., test assertions, test cases), use of reference data, test reporting formats, and means of testing requirements.

  • Conformance testing captures the technical description of a specification and measures whether an implementation faithfully implements the specification.

  • PAVEMENT ACCEPTANCE REQUIREMENTS Obtain the Superintendent’s approval for pavement and shoulders acceptance prior to any surfacing work, including satisfying all requirements for: Final Pavement Layer Integrity Dry back Proof Rolling Conformance testing Surface Roughness Other Tolerances For unsealed pavements, obtain the Superintendent’s approval for pavement conformance at conclusion of pavement works.

  • Conformance testing - Interoperability profiles - Interoperability testing and badging i.e. .

  • But in the control group the observed practice is clamping the umbilical cord which may cause trapping of blood inside the cord and increase its bulkiness.

  • Conformance testing is a black-box testing method that aims to validate that the implementations of systems conform to their specifications.

  • Conformance testing is a kind of functional testing in which an implemen- tation of a protocol entity is solely tested with respect to its specification.

Related to Conformance testing

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • S&P CDO Monitor Test A test that will be satisfied on any date of determination (following receipt, at any time on or after the S&P CDO Monitor Election Date, by the Issuer and the Collateral Administrator of the Class Break-even Default Rates for each S&P CDO Monitor input file (in accordance with the definition of “Class Break-even Default Rate”)) if, after giving effect to a proposed sale or purchase of an additional Collateral Obligation, the Class Default Differential of the Highest Ranking Class of the Proposed Portfolio is positive. The S&P CDO Monitor Test will be considered to be improved if the Class Default Differential of the Proposed Portfolio that is not positive is greater than the corresponding Class Default Differential of the Current Portfolio.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Genetic testing means an analysis of genetic markers to exclude or identify a man as the father or a woman as the mother of a child. The term includes an analysis of one or a combination of the following:

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;

  • Cannabis testing facility means an entity registered by