Contact surface definition

Contact surface means any surface that contacts cannabis products and cannabis product components and those surfaces from which drainage, or other transfer, onto the cannabis product or cannabis product components, occurs during the normal course of operations. Examples of contact surfaces include containers, utensils, tables, and equipment.
Sample 1Sample 2Sample 3
Contact surface means any surface that normally comes into contacts with cannabis products and cannabis product components and those surfaces from which drainage, or other transfer, onto the cannabis product or cannabis product components,
Sample 1Sample 2Sample 3
Contact surface means any surface that contacts cannabis, a component, or a manufactured cannabis product, and those surfaces from which drainage onto the cannabis, component, or manufactured cannabis product, or onto surfaces that contact the cannabis, component, or manufactured cannabis product, occurs during the normal course of operations. Examples of contact surfaces include containers, utensils, tables, surfaces of equipment, and packaging.
Sample 1Sample 2Sample 3

Examples of Contact surface in a sentence

  • Contact surface shall be carefully designed and manufactured in order to transfer short circuit current.

  • Contact surface area (CSA) is a descriptive, CT-based radiologic data point that may better reflect tumor complexity by numerically combining two important aspects, tumor size and percentage endophytic component, into a single radiologically measurable parameter.

  • Pressure screws of the carriage Contact surface of the carriageMain guideAuxiliary guideMachine bedPressure screws of the rail guide Contact surface of the rail guide Figure 3.1 Installation for application with two linear guides arranged in parallel The locating edges are used to achieve accurate positioning during installation.

  • Contact surface shall first be cleaned and then inhibited from oxidation with a suitable non-corrosive compound.

  • Contact surface should be clean and smooth with non-abrasive fittings to avoid damage.

  • Contact surface shall be free from scale, paint, enamel, grease, rust or dirt.

  • Contact surface variations, distortions and wear are taken into account.

  • Contact surface of N12 in wet test at 7.2 m/s and 50 NThe rubbing surface was smoothened and characterised by scratches parallel to the sliding orientation as appeared in Figure 15.Nylon 66a Material: there was a slight influence on material wear resistance when sliding speed increased from 1.5 to 3.3 m/s at a load of 10 N (Fig.

  • Contact surface is updated as elements on free surface are deleted according to material failure criteria, in this work considered as the Failure Strain equal to 0,05.

  • Contact surfacen→v→tContact pointdv→relvni→Contact body Figure 2.5 Contact surface and contact node [20] 2.3.2 Friction Model (Asperity-Friction)‌The surface of a smooth rigid body looks rough with peaks and valleys if examined under a microscope.


More Definitions of Contact surface

Contact surface means a surface of equipment or utensil with which cannabis products and their ingredients normally comes into contact; and those surfaces from which drainage, or other transfer onto the cannabis products and their ingredients occur during the normal course of operations.
Sample 1Sample 2
Contact surface means any surface that comes in contact with a Production Material, Finished Product or Packaging during manufacture, processing, packaging, labeling, or storage.
Sample 1Sample 2
Contact surface means any surface that contacts a component or hemp product, and those surfaces from which drainage onto the component or hemp product, or onto surfaces that contact the component or hemp product, occurs during the normal course of operations. Examples of contact surfaces include containers, utensils, tables, surfaces of equipment, and packaging.
Sample 1
Contact surface means any surface that contacts cannabis products and cannabis product components and those surfaces from which drainage, or other transfer, onto the
Sample 1
Contact surface means any surface that directly contacts hemp, components, or hemp-derived product, and any surface from which drainage onto hemp, components, or hemp-derived product, or onto surfaces that contact hemp, components, or hemp-derived product, may occur during the normal course of operations.
Sample 1
Contact surface means any surface, including equipment, that comes into contact with milk or milk products during processing;
Sample 1

Related to Contact surface

  • Impact surface means an interior or exterior surface that is subject to damage by repeated sudden force such as certain parts of door frames.

  • Contactless means a payment feature that provides You with a way to pay by tapping the Card on a point–of–sale terminal reader for transactions of up to a specified limit.

  • Contact adhesive means a non-aerosol adhesive that: (i) is designed for application to both surfaces to be bonded together, and (ii) is allowed to dry before the two surfaces are placed in contact with each other, and (iii) forms an immediate bond that is impossible, or difficult, to reposition after both adhesive- coated surfaces are placed in contact with each other, and (iv) does not need sustained pressure or clamping of surfaces after the adhesive-coated surfaces have been brought together using sufficient momentary pressure to establish full contact between both surfaces. “Contact Adhesive” does not include rubber cements that are primarily intended for use on paper substrates. “Contact Adhesive” also does not include vulcanizing fluids that are designed and labeled for tire repair only.

  • Stormwater management planning area means the geographic area for which a stormwater management planning agency is authorized to prepare stormwater management plans, or a specific portion of that area identified in a stormwater management plan prepared by that agency.

  • Contact therapy system means a therapeutic radiation machine with a short target to skin distance, usually less than 5 centimeters.

  • Birth center means a facility or institution, which is not an ambulatory surgical center or a hospital or in a hospital, in which births are planned to occur following a normal, uncomplicated, low-risk pregnancy.

  • Planning area means a planning area or a development area or a local planning area or a regional development plan area, by whatever name called, or any other area specified as such by the appropriate Government or any competent authority and includes any area designated by the appropriate Government or the competent authority to be a planning area for future planned development, under the law relating to Town and Country Planning for the time being in force and as revised from time to time;

  • Pervious surface means an area that releases as runoff a small portion of the precipitation that falls on it. Lawns, gardens, parks, forests or other similar vegetated areas are examples of surfaces that typically are pervious.

  • Pavement means any type of improved surface that is within the public right-of-way and that is paved or otherwise constructed with bituminous, concrete, aggregate, or gravel.

  • Surface water means all water which is open to the atmosphere and subject to surface runoff.

  • PAD means a Preauthorized Debit.

  • Public safety answering point or “PSAP” means an answering location for 911 calls originating in a given area. The E911 Customer may designate a PSAP as primary or secondary, which refers to the order in which calls are directed for answering. Primary PSAPs answer calls; secondary PSAPs receive calls on a transfer basis. PSAPs are public safety agencies such as police, fire, emergency medical, etc., or a common bureau serving a group of such entities.

  • Access Road means Kuchha road connecting excavating pit to mine approach road.

  • Building Energy Benchmarking means the process of measuring a building’s Energy use, tracking that use over time, and comparing performance to similar buildings.

  • Scaling as used herein, involves:

  • Rear Yard means a yard extending across the full width of a parcel measured perpendicularly from the rear wall(s) of the main building situated on the parcel to the rear property boundary of the parcel [see sketch in Schedule B];

  • PIDs shall have the meaning set forth in Exhibit B.

  • Water surface elevation means the height, in relation to the National Geodetic Vertical Datum (NGVD) of 1929, the North American Vertical Datum (NAVD) of 1988, or other datum, where specified, of floods of various magnitudes and frequencies in the floodplains of riverine areas.

  • Subsurface Borings and Testing means borings, probings and subsurface explorations, laboratory tests and inspections of samples, materials and equipment; appropriate professional interpretations of all the foregoing.

  • Enclosure means the part enclosing the internal units and providing protection against any direct contact.

  • townsite in relation to the townsite to be established near the harbour means a townsite (whether or not constituted and defined under section 10 of the Land Act) primarily to facilitate the Company’s operations in and near the harbour and for employees of the Company and in relation to the mining areas means such a townsite or townsites or any other townsite or townsites which is or are established by the Company for the purposes of its operations and employees on or near the mining areas in lieu of a townsite constituted and defined under section 10 of the Land Act;

  • Campsite means any place where any bedding, sleeping bag, or other material used for bedding purposes, or any stove or fire is placed, established or maintained for the purpose of maintaining a temporary place to live, whether or not such place incorporates the use of any tent, lean-to, shack, or any other structure, or any vehicle or part thereof.

  • Surface waters means all waters of the state as defined in G.S. 143-212 except underground waters

  • Customer Service means Company’s customer service telephone service department or representatives.

  • Public safety answering point (PSAP) means a 24-hour, state, local, or contracted communications facility, which has been designated by the local service board to receive 911 service calls and dispatch emergency response services in accordance with the E911 service plan.

  • Tourism destination project means a qualified non-gaming business facility that will be among the most visited privately owned or operated tourism or recreation sites in the State, and which is located within the qualified incentive area and has been determined by the authority to be in an area appropriate for development and in need of economic development incentive assistance, including a non-gaming business within an established Tourism District with a significant impact on the economic viability of that District.