Electrical Contractor Name definition

Electrical Contractor Name. Mailing Address: City: State: Zip Code: Contact Person: Telephone (Daytime): (Evening): Fax Number: E-Mail Address: The undersigned asserts that the Equipment has been installed in accordance with Part 1 of the Interconnection Application/Agreement as well as all applicable codes and regulations. ELECTRICAL INSPECTION Signed: Date: Printed Name: Title: Completion of local inspections may be designated on inspection forms used by local inspecting authorities. The system has been installed and inspected in compliance with the provisions of the National Electrical Code and other applicable codes and standards as well as the local Building/Electrical Code of: (Appropriate Governmental Authority) Signed: Date: Printed Name: Title: CUSTOMER-GENERATOR SIGNATURE16 The Customer-Generator Facility is complete and ready for interconnected operation in accordance with all of the provisions of the Interconnection Application/Agreement. The Customer-Generator acknowledges that it shall not operate the Facility until receipt of Final Acceptance (below), or as otherwise provided for by regulation. Final Acceptance to Interconnect Small Generator Facility Signed: Date: Printed Name: Title: (for Use by EDC Only) The requirements for interconnection are complete and interconnection of the Customer- Generator Facility is accepted upon signature and return of this Certificate of Completion or by notification by electronic mail or other acceptable means by the EDC. Electric Distribution Company waives Witness Test? (Initial) Yes ( ) No ( ) If no, Successful Witness Test Date: Passed: (Initial) ( ) EDC Signature: Date: Printed Name: Title:
Sample 1Sample 2Sample 3
Electrical Contractor Name. Mailing Address: City: State: Zip Code: Contact Person: Telephone (Daytime): (Evening): Fax Number: E-Mail Address: CUSTOMER-GENERATOR INSURANCE DISCLOSURE The attached Terms and Conditions contain provisions related to liability, and indemnification and should be carefully considered by the Customer-Generator. The Customer-Generator is not required to obtain liability insurance coverage as part of this Application/Agreement; however, the Customer-Generator is advised to consider obtaining appropriate coverage. CUSTOMER-GENERATOR SIGNATURE
Sample 1Sample 2Sample 3
Electrical Contractor Name. Mailing Address: City: State: Zip Code: Telephone (Daytime): (Evening): Fax Number: E-Mail Address: License number: _Active License? Yes No Is small generator facility eligible for Net Metering? Yes No INSURANCE DISCLOSURE The attached terms and conditions contain provisions related to liability and indemnification, and should be carefully considered by the interconnection customer. The interconnection customer is not required to obtain general liability insurance coverage as a precondition for interconnection approval; however, the interconnection customer is advised to consider obtaining appropriate insurance coverage to cover the interconnection customer’s potential liability under this agreement.
Sample 1Sample 2

Examples of Electrical Contractor Name in a sentence

  • Electrical Contractor Name (please print) Estimated Dollar Value of work (less sales tax): $ Contractor Registration Number: Contractor UBI Number: Type of work - (OTHER-Specify If More Than 5% Of Bid Value): Contractor Name: Estimated Dollar Value of work (less sales tax): $ Contractor Registration Number: Contractor UBI Number: Person/Entity Name: Signature Of Bidder: If no subcontractors are to be used state “none” on the line for the first contractor.

  • I have/ have not previously engaged an electrical contractor to carry out the electrical works at the specific installation._________________________ _______________________ ________________ Electrical Contractor Name Signature Date Rubber Stamp 17.

  • ABAG and MTC developed and adopted Plan Bay Area in July 2013 to address the expected population and employment growth in the region, as ABAG expects that the population of the Bay Area region will grow from 7,341,700 residents in 2010 to 8,719,300 residents in 2030.

  • UoA Office of the University Engineer MEMORANDUM OF UNDERSTANDING [M.O.U] BETWEEN 1] M/S [Name of the firm with full address] Enlistment StatusValid Upto: [Henceforth called the main contractor] And 2] M/S [Name of the firm with full address] Enlistment StatusValid Upto: [Henceforth, called Associated Electrical Contractor or Electrical Contractor] Name of Work: Construction of Hall at first floor, Department of Hindi, University of Allahabad, Allahabad.

  • Signature of Supervisor Signature of Electrical Contractor Name and address Name and address ………………………..

  • As addressed above, we also adopt application procedures prohibiting commonly controlled applicants or applicants subject to joint bidding arrangements from selecting any of the same states on their applications.

  • Proposals must be sealed with the Bidder’s name on the outside of the envelope and designated as follows: Sealed ProposalUtica Community Schools18-9-2020 Athletic Scoreboard Replacement Bid Category 26 0000 Electrical [Contractor Name] [Contractor Address] [Contractor Phone Number] Alternatively, Bidder’s may, but shall not be obligated to, submit bids electronically via Building Connected.

  • Electrical Contractor Name: _______________________________________________________________________ Estimated Dollar Value of work (less sales tax): $____________________________ Contractor’s Registration Number: _____________________ Contractor’s UBI Number: _____________________ Type of work – (PLUMBING any value): Plumbing as described in chapter 19.28 RCW.

  • If no, facility is not eligible for Level 1 Application.) EQUIPMENT INSTALLATION CONTRACTORContractor Name: ■Advanced SolarOwner (Customer) Installed:Yes NoMailing Address:1047 Carberry CourtCity:White PlainsState: MDZip Code:20695Telephone (Daytime):(240) 416-4030(Evening):Fax Number: E-Mail Address (Required):permits@wdcsolar.com ELECTRICAL CONTRACTOR Electrical Contractor Name: Scott JohnsonMailing Address: 1105 W.

  • Building Contractor Name: Electrical Contractor Name: Plumbing Contractor Name: Mechanical Contractor Name: All contractors are required to have a County Business license.


More Definitions of Electrical Contractor Name

Electrical Contractor Name. Phone: For Office Use Only: Reviewed by: Existing transformer size: kVA Transformer upgrade required? _ Size Required: kVA Sec. wire owner: Sec. wire upgrade required? _ Size Required? This institution is an equal opportunity provider and employer
Sample 1

Related to Electrical Contractor Name

  • Electrical contractor means an electrical contractor as defined in the Regulations;

  • Building Contractor means the building contractor or developer appointed or to be appointed by the Grant Recipient in respect of a Firm Scheme; Business Day means any day other than a Saturday, Sunday or a statutory Bank Holiday in England;

  • Project Name refers to the project title as stated in the legal agreement (Financing Agreement) between the World Bank and the Government. It should not be confused with the name of the UN Agency’s project or program financed from other sources.]

  • Residential contractor means a licensed contractor that holds an endorsement as a:

  • Construction Contractor means a person who undertakes to or offers to undertake to, or purports to have the capacity to undertake to, or submits a bid to, or does himself or by or through others, construct, alter, repair, add to, subtract from, improve, move, wreck, or demolish any building, highway, road, railroad, excavation, or other structure, project, development, or improvement to real property, or to do any part thereof. "Construction contractor" includes subcontractors, specialty contractors, prime contractors, and any person receiving consideration for the general supervision and/or coordination of such a construction project except for remediation contracting. This definition shall govern without regard to whether or not the construction contractor is acting in fulfillment of a contract.

  • Design-Builder means the Person selected pursuant to the RFP that enters into the Contract with the Department to design and construct the Project (also referred to as the “Design-Build Team”).

  • Home improvement contractor or "contractor" means a person who sells goods and services, or agrees to furnish or render services, to a retail buyer pursuant to a home improvement installment contract, or sells goods and services to a retail buyer pursuant to a home improvement charge agreement, but not in connection with construction of new homes.

  • EPC Contractor means Seller’s engineering, procurement and construction contractor or such Person performing those functions.

  • Design-build means a project delivery method in which the detailed design and subsequent construction is provided through a single contract with a Design-Build firm; a team, partnership, or legal entity that includes design professionals and a builder. The Design-Build Project delivery shall be implemented in accordance with Tex. Gov’t Code § 2166.2531.2

  • General Contractor means a person or entity duly licensed in the state of Florida with the requisite skills, experience and credit worthiness to successfully provide the units required in the Application, and which meets the criteria described in Rule 67-48.0072, F.A.C.

  • Electrical work Concealed and fire resistant wiring of “ISI” Copper Wire, Distribution board with “MCB”. “ISI” xxxx modular electrical accessories, Landline phone conduit, Cable TV wiring conduit, Separate line for inverter connection, Air-conditioner power point. Painting : Long Lasting and weather resistant acrylic paint to all external walls, All internal walls with white cement based putty finish with OBD. Plumbing & Sanitation : Sanitary xxxx for toilets, plumbing fixtures, CPVC/UPVC pipe and fitting(ISI make), SWR drainage system. Kitchen: Granite platform, ceramic tiles dado upto 2’ height, Stainless Steel sink in Kitchen, Aquaguard point, Connection for washing machine in wash area.

  • Electrical protection barrier means the part providing protection against any direct contact to the high voltage live parts.

  • Contractor Project Manager means the employee identified in a Statement of Work as the Contractor project manager.

  • Contractor System means the information and communications technology system used by the Contractor in performing the Services including the Software, the Contractor Equipment and related cabling (but excluding the Authority System).

  • Rechargeable Electrical Energy Storage System (REESS) means the rechargeable energy storage system that provides electric energy for electrical propulsion.

  • Supplier/Contractor means the individual, firm or company with whom the contract has been concluded for supplying the Goods and Services under the Contract. The Supplier/Contractor shall be deemed to include its successors (approved by the purchaser), representatives, heirs, executors, administrators and permitted;

  • Plumbing contractor means a licensed master plumber or a person who employs a licensed master plumber full-time to directly supervise the installation of plumbing as his or her representative engaged in the business of plumbing for a fixed sum, price, fee percentage, valuable consideration, or other compensation and who is licensed as a plumbing contractor.

  • Construction Phase Services means the coordination, implementation and execution of the Work required by this Agreement, which are further defined in Article 8.

  • Design-build contract means a single contract with a Design-Build Firm for the design and construction of a public construction project.

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.

  • Electrical cleaner means a product labeled to remove heavy soils such as grease, grime, or oil from electrical equipment, including, but not limited to, electric motors, armatures, relays, electric panels, or generators. Electrical Cleaner does not include “General Purpose Cleaner,” “General Purpose Degreaser,” “Dusting Aid,” “Electronic Cleaner,” “Energized Electrical Cleaner,” “Pressurized Gas Duster,” “Engine Degreaser,” “Anti-Static Product,” or products designed to clean the casings or housings of electrical equipment.

  • Architect/Engineer (A/E means a person registered as an architect pursuant to Tex. Occ. Code Ann., Ch. 1051, as a landscape architect pursuant to Tex. Occ. Code Ann., Ch. 1052, a person licensed as a professional engineer pursuant Tex. Occ. Code Ann., Ch. 1001, and/or a firm employed by Owner or Design-Build Contractor to provide professional architectural or engineering services and to exercise overall responsibility for the design of a Project or a significant portion thereof, and to perform the contract administration responsibilities set forth in the Contract.

  • Design-build team means an entity that consists of:

  • O&M Contractor means the person, if any, with whom the Concessionaire has entered into an O&M Contract for discharging O&M obligations for and on behalf of the Concessionaire;

  • drainage work means any construction or reconstruction of or any alteration or addition to, or any work done in connection with a drainage installation but shall not include any work undertaken solely for purposes of repair or maintenance;

  • Elevator contractor means a sole proprietor, firm, or corporation licensed under this chapter that is engaged in the business of erecting, constructing, installing, altering, servicing, repairing, or maintaining an elevator.