Electronics Technician definition

Electronics Technician means a person employed as such who is the possessor of an Electronics and Communications Certificate of the Department of Technical and Further Education, or who has qualifications and/or experience deemed by the employing hospital to be equivalent and the major portion of whose duties include the construction, adaptation, alteration, repair and/or maintenance of electronic equipment.
Sample 1Sample 2Sample 3
Electronics Technician means an Employee whose duties are defined in Clause 6.1 of Part A. 'Employee' means a person engaged to work shift work by the Employer on a permanent basis for the job classifications covered by this Part B and, for the avoidance of doubt, means persons who would otherwise be categorised under Part A to be:
Sample 1
Electronics Technician means an Employee whose duties are defined in Clause 6.1
Sample 1

Examples of Electronics Technician in a sentence

  • Employees in the following classes are included in this Safety Incentive Program: Xxxxxxxxx Electrician Electronics Technician Fairground Aid Fairground Attendant Fusion Welder Groundskeeper Maintenance Worker Painter Senior Maintenance Worker Tractor Operator- Laborer Heavy Equipment Mechanic Maintenance Mechanic At the discretion of the 22nd DAA, additional classes may be designated where it is deemed appropriate.

  • Cabinets and ITS components shall be field tested in accordance with the field test procedure furnished by the Department and the test results shall be submitted to the ITS Electronics Technician of the Operations Support Division.

  • The next overtime will be offered to the Electronics Technician highest on the list without an “A” or “R” indicated and so on until the first column is filled then progress back to the top of the list and the next column.

  • The Electronics Technician for Industrial Engineering certification represents industry acknowledgement of technical skill attainment of competencies in the Manufacturing Technology program.

  • The educational roadmap below will assist Sailors in the Aviation Electronics Technician “O” Level community through the process of pursuing professional development and advanced education using various military and civilian resources e.g. PQS program; SMART Transcript; NKO (E-Learning); Navy College; etc.

  • To be eligible for articulation, the student must show evidence of their current Associate Certified Electronics Technician (CETa) certification and it must have been issued within three (3) years prior to their enrollment in the program.

  • II 400 7391 409 Electronic Pre-Press Specialist 400 3302 410 END Technician I 400 3303 412 END Technician II 400 3304 415 END Technician III 400 3401 412 Electronics Technician I 400 3402 415 Electronics Technician II 400 8221 409 E.

  • The Associate Certified Electronics Technician (CETa) certification represents industry acknowledgement of technical skill attainment of competencies in the Electronics Engineering Technology program.

  • State college administrators were consulted and agreed that the Associate Certified Electronics Technician (CETa) certification shall articulate three (3) college credit hours to the AS degree in Engineering Technology.

  • To be eligible for articulation, the student must show evidence of their current Electronics Technician for Industrial Engineering certification and it must have been issued within three (3) years prior to their enrollment in the program.


More Definitions of Electronics Technician

Electronics Technician means an Employee whose duties are defined in Clause 6.1 of Part A.
Sample 1
Electronics Technician. An employee who is responsible for diagnosing and repairs of all the electronic devices for the fleet. These components include but are not limited to; Fareboxes, tracking systems, video systems, head signs and passenger counting systems. This employee must have great knowledge in electrical functions and can work with limited supervision.
Sample 1

Related to Electronics Technician

  • Nail technician means any person who for compensation manicures or pedicures natural nails, or who performs artificial nail services for compensation, or any combination thereof.

  • Pharmacy technician or “technician” means a person who is employed in Iowa by a licensed pharmacy under the responsibility of an Iowa-licensed pharmacist to assist in the technical functions of the practice of pharmacy, and who is registered pursuant to 657—Chapter 3, and includes a certified pharmacy technician, a pharmacy technician trainee, and an uncertified pharmacy technician.

  • Breath Alcohol Technician (BAT) means an individual who instructs and assists individuals in the alcohol testing process and who operates the EBT.

  • Technician means an individual determined to be qualified to remove or process parts by an appropriate organization that is licensed, accredited, or regulated under federal or state law. The term includes an enucleator.

  • Dental technician means a person who owns, operates or is

  • Screening Test Technician (STT) means anyone who instructs and assists individuals in the alcohol testing process and operates an ASD.

  • Certified pharmacy technician or “certified technician” means an individual who holds a valid current national certification and who has registered with the board as a certified pharmacy technician.

  • Emergency medical technician means a person who is either an EMT-I, EMT-II, or EMT-P (paramedic), and possesses a valid certificate or license in accordance with the standards of Division 2.5 (commencing with Section 1797) of the Health and Safety Code.

  • Pharmacy technician trainee or “technician trainee” means an individual who is in training to become a pharmacy technician and who is in the process of acquiring national certification as a pharmacy technician as provided in rule 657—3.5(155A).

  • Emergency Medical Technician (EMT means: an individual licensed with cognitive knowledge and a scope of practice that corresponds to that level in the National EMS Education Standards and National EMS Scope of Practice Model.

  • Sewage Works means all facilities for collecting, pumping, treating, and disposing of sewage.

  • Contractor Software means software which is proprietary to the Contractor, including software which is or will be used by the Contractor for the purposes of providing the Services.

  • NEC Electronics products means any product developed or manufactured by or for NEC Electronics (as defined above).

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Nuclear medicine technologist means an individual who holds a current certification with the American Registry of Radiological Technologists or the Nuclear Medicine Technology Certification Board.

  • Developed Software means software specifically designed for the Principal under the Contract. Depending how advanced its development is, it may be either a Product or a Service or both.

  • Electronic device technology means a technology involving

  • Developed Technology means any Technology including, without limitation, any enhancements, substitutions or improvements to the Core Technology that is (a) discovered, developed or otherwise acquired by DURA pursuant to the terms of the Development Agreement or (b) otherwise acquired by or on behalf of Xxxxxx Corp. II during the term of the Development Agreement.

  • Contractor Materials means Materials owned or developed prior to the provision of the Work, or developed by Contractor independently from the provision of the Work and without use of the JBE Materials or Confidential Information.

  • Diagnostic source assembly means the tube housing assembly with a beam-limiting device attached.

  • Manufacturing Technology means any and all patents, patent applications, know-how, and all intellectual property rights associated therewith that are owned or controlled by Licensor, and including all tangible embodiments thereof, that are necessary or useful for the manufacture of adeno-associated viruses, adeno-associated virus vectors, research or commercial reagents related thereto, Licensed Products, or other products, including manufacturing processes, technical information relating to the methods of manufacture, protocols, standard operating procedures, batch records, assays, formulations, quality control data, specifications, scale up, any and all improvements, modifications, and changes thereto, and any and all activities associated with such manufacture. Any and all chemistry, manufacturing, and controls (CMC), drug master files (DMFs), or similar materials provided to regulatory authorities and the information contained therein are deemed Manufacturing Technology.

  • Radiologic technologist means an individual, other than a licensed doctor of medicine, osteopathy,

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Clinician means a physician licensed under chapter 37 of title 5; a nurse licensed

  • Store and forward technology means use of an asynchronous transmission of a covered person's medical information from an originating site to the health care provider at a distant site which results in medical diagnosis and management of the covered person, and does not include the use of audio-only telephone, facsimile, or email; and

  • Assistive technology service means any service that directly assists a child with a disability in the selection, acquisition, or use of an assistive technology device. The term includes: