Equipment Exclusion Zone definition

Equipment Exclusion Zone. (EEZ) means the area, as explained in the THP, where heavy equipment associated with timber operations is totally excluded for the protection of water quality, the beneficial uses of water, and/or other forest resources.
Equipment Exclusion Zone. Invasive Species: Forest Service Road 2512: Ground based equipment shall not operate within 50 feet of the road edge of Forest Service Road 2512 to mitigate the spread of invasive species, as shown on Sale Area Map. Trees shall be directionally felled away from improvements and out of STA to ensure ground based equipment does not enter or operate in STA. Ground based equipment shall be capable of end-lining timber out of STA. Ground based equipment may operate on Forest Road 2512, as agreed to by Forest Service.
Equipment Exclusion Zone. Botanical Protection: subdivision 5 and 652 and adjacent to Forest Service Roads 2500000 and 2512040: STA - Botanical Protection Areas are identified on the ground by exclusion from subdivisions with orange subdivision boundary tags and orange paint and shown on Sale Area Map to mitigate disturbance to rare plant populations, identified with yellow and black stripe flagging. Operations shall not enter, disturb, or damage STAs. Purchaser shall directionally fell timber away from STAs. Material felled into STAs shall not be removed, unless otherwise agreed to by Forest Service. Yarding through STAs requires full suspension of all material, as agreed to by Forest Service. Red Tree Vole Nest Trees (RTV Nest Trees) – All subdivisions: RTV Nest Trees are identified on the ground with orange and white stripe flagging and aluminum tags and shown on Sale Area Map. RTV Nest Trees shall not be disturbed or damaged by Operations. Purchaser shall directionally fell and yard or skid timber away from RTV Nest Trees, as agreed to by Forest Service.

Examples of Equipment Exclusion Zone in a sentence

  • No equipment can enter the 25 feet Equipment Exclusion Zone on either side of the streambed.

  • This new regulation closed loopholes that facilitated illegal trade in hawksbill shell between local suppliers and foreign importers.

  • The location of the waterbreak will be designated by placing a flag at the waterbreak inlet and an additional flag at the waterbreak outlet.3. Yellow and white striped flagging – Equipment Exclusion Zone.

  • In any Watercourse and Lake Protection Zone (WLPZ), Special Treatment Zone (STZ), or Equipment Exclusion Zone (EEZ); a.

  • The outer portion of the Riparian Reserve (Riparian Reserve Treatment area; RRT) and the inner portion (Equipment Exclusion Zone; EEZ) will allow manual cutting, lop and scatter, hand piling and pile burning operations; however hand pile and burn activities in the EEZ will be limited to slopes less than 25%.

  • Permission to do otherwise must be granted in writing by the Contract Administrator.H-141.1 Additional Harvest RequirementsContractor shall accomplish the following during the harvest operations: No motorized equipment may operate within the 50-foot Equipment Exclusion Zone of any Typed 3, 4 streams (no equipment within 25 feet of the white "Timber Sale Boundary" tags in (Units 4-6.) Loading of logs is not permitted on the E-1000.

  • The site plus a 10 meter buffer shall be flagged with “Special Treatment” flagging and designated an Equipment Exclusion Zone.

  • ALLGround based mechanical felling equipment shall limit operations within the Equipment Exclusion Zone as shown on Sale Area Map pursuant to C6.24#.1, 8 FELLING EQUIPMENT SUBDIVISIONSGround based mechanical felling equipment shall be capable of cutting, carrying, and bundling trees to skid trails.

  • Refer to the Table1 below for watercourse protection requirements.Table 1 – Protection measures/treatment limitations for watercourse protection zones (Buffer Zones) Class 1 wetClass II wetClass IIIdryClass IIIwetWet meadowWork Exclusion Zone (from channel edge or edge of meadow)25 ft.25 ft.None25 ft.100 ft.Heavy Equipment Exclusion Zone (Hand work only)75 ft.25 ft.25 ft.25 ft.N/ATotal Buffer for Limited Work100 ft.50 ft.25 ft.50 ft.100 ft.Buffer Zones distance apply to each side of watercourse.

  • The Contractor must provide professional services support on an “as-and-when-requested” basis as outlined in this SOW as follows: The Contractor must provide professional services for Data Center Consolidation (DCC) to consolidate existing data centres across DND and move operations into seven modern, secure and reliable centres to reduce the government’s data centre footprint.

Related to Equipment Exclusion Zone

  • Analytical x-ray equipment means equipment used for x-ray diffraction or fluorescence analysis.

  • Port Cargo Handling Equipment means rubber-tired gantry cranes, straddle carriers, shuttle carriers, and terminal tractors, including yard hostlers and yard tractors that operate within ports.

  • embedded generator means a generator who is not a market participant and whose generation facility is connected to a distribution system of a distributor, but does not include a generator who consumes more electricity than it generates;

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.

  • Modular building manufacturer means a person or corporation who owns or operates a

  • Replacement Product means electric generating capacity, capacity-related benefits, environmental attributes, Energy or other electric products from a generation resource other than the Facility that are provided or delivered to replace or substitute for Contract Capacity or Storage Capacity (or any Capacity-Related Benefit, Environmental Attribute, Other Electric Product, Contract Energy, or Storage Energy associated therewith), in each case, in whole or in part, pursuant to Section 4.6.

  • Compression Ignition Engine means an internal combustion engine with operating characteristics significantly similar to the theoretical diesel combustion cycle. The regulation of power by controlling fuel supply in lieu of a throttle is indicative of a compression ignition engine.

  • Airport Ground Support Equipment means vehicles and equipment used at an airport to service aircraft between flights.

  • Engine Manufacturer means CFM International, Inc.

  • Supplier Equipment means the Supplier's hardware, computer and telecoms devices, equipment, plant, materials and such other items supplied and used by the Supplier (but not hired, leased or loaned from the Customer) in the performance of its obligations under this Call Off Contract;

  • Equipment Room means a space intended for the operation of pool pumps, filters, heaters and controllers.

  • Terminal Equipment means all telephone instruments, including pay telephone equipment, the common equipment of large and small key and PBX systems and other devices and apparatus, and associated wirings, which are intended to be connected electrically, acoustically or inductively to the telecommunication system of the telephone utility.

  • Equipment Cost means, for any Item of Equipment, the gross amount paid by the Company to the manufacturer thereof, including all applicable sales taxes, and delivery charges as invoiced by such manufacturer to the Company.

  • Standard equipment means the basic configuration of a vehicle which is equipped with all the features that are required under the regulatory acts of the Contracting Party including all features that are fitted without giving rise to any further specifications on configuration or equipment level.

  • Satellite Manufacturer means, with respect to any Satellite, the prime contractor and manufacturer of such Satellite.

  • Rental Equipment means the equipment identified on the Service Agreement and Order Schedule or otherwise notified to you in writing that we will rent to you as part of our provision of the Services and which you will return to us after expiry or termination of the Agreement, subject to the provisions of this Agreement.

  • Replacement Equipment means operational equipment or other parts used by Tenant to replace any of the Equipment.

  • Distributor’s Equipment means the Fittings and Metering Equipment owned by the Distributor, the Distributor’s agent, or any other third party with whom the Distributor has contracted with for the use by the Distributor of the party’s Fittings or Metering Equipment that are from time to time installed in, over or on Consumer’s Premises;

  • Maintenance area means any geographic region of the United States previously designated nonattainment pursuant to the CAA Amendments of 1990 and subsequently redesignated to attainment subject to the requirement to develop a maintenance plan under §175A of the CAA, as amended.

  • Accessory equipment means any equipment associated with the installation of a wireless telecommunications facility, including but not limited to cabling, generators, fans, air conditioning units, electrical panels, equipment shelters, equipment cabinets, equipment buildings, pedestals, meters, vaults, splice boxes, and surface location markers.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Customer Equipment means hardware, software, systems, cabling and facilities provided by you and used in conjunction with the Equipment that we supply to you in order to receive the Services;

  • Small quantity generator means a generator who generates less than 1000 kg of hazardous waste in a calendar month.

  • Fixed Equipment means any property affixed in any way to the Licensed Premises existing at the time Notice to Proceed is given, whose removal would damage the Licensed Premises.

  • City-based manufacturer means a person who: (i) holds any appropriate city license; (ii) is subject to applicable city taxes; and (iii) owns, operates, or leases a manufacturing facility within the city.

  • Contributory drainage area means the area from which stormwater runoff drains to a stormwater management measure, not including the area of the stormwater management measure itself.