Examples of Hot Saw in a sentence
This piece of equipment shall have effective communication with the Hot Saw or Masticator.b) Any additional restrictions specified by the Forest.3. All other conventional Mechanical Operations are permitted until 1:00 PM.4. Some operations may be permitted after 1:00 PM, on a case-by-case basis, under the terms of a PAL Ev Variance Agreement.
Hot Saw: A harvesting system that employs a high-speed (>1100 rpm) rotating felling head (i.e., full rotation lateral tilt head).
This piece of equipment shall have effective communication with the Hot Saw or Masticator.b) Any additional restrictions specified by the Forest.
The following definitions shall apply to HT.2# and KT-HT.2.2#: All Terrain Tank Truck or Equivalent: An all terrain fire vehicle or trailer that is capable of traversing same terrain as the Hot Saw Technology or masticator and meets all Item J - Tank Truck specifications.
When Purchaser is using Hot Saw Technology, an additional 500 feet of not less than one (1) inch outside diameter serviceable hard rubber poly or rubber lined or fiber jacket rubber lined (FJRL) hose shall be immediately available for use and be capable of connecting to the 300 feet of hose and appurturances in (2) and (3) above.
Purchaser shall meet minimum requirements of Section 4430 of the CPRC.Purchaser shall provide a water tank truck or trailer on or in proximity to Sale Area during Purchaser's Operations hereunder during Fire Precautionary Period unless otherwise agreed.When Project Activity Level B or higher is in effect, a tank truck or trailer shall be on or within ten (10) roundtrip minutes to each Active Landing unless otherwise excepted when Hot Saw or masticator is being used.
Contractor shall equip all mechanized harvesting machines and log processors with hydraulic systems, powered by an internal combustion engine (e.g. masticator, chipper, xxxxxx/xxxxxxx, harvester, forwarder, Hot Saw, stroke delimber, etc), with at least two 4-A:60-B:C fire extinguishers or an acceptable CAFS substitute identified in Section K.
Our previous work showed that there was no loss in cell viability within the ratchet device35 and previous work using pinched channels similar to our concentrator demonstrate no loss in viability of the cells flowing through the pinch regions even at much higher flow rates than are used in our device.5 Moreover, the ability to extract cells off the filter element makes this system cascade-able for both on-chip and off-chip downstream processing.
Cleaning of Hot Saw surrounding area and removal of Crop end, Shell, cotton waste, etc.
Finishing delays occur at the final phase of production – when the rails are coming from the Hot Saw section to the cooling bed.