Inspection manhole definition

Inspection manhole means a structure constructed for the purpose of measuring flow and sampling waste.
Sample 1Sample 2Sample 3
Inspection manhole means an access point in a sewer service which may be located on private property and is designed to allow observations, sampling and flow measurement of the wastewater, contaminated water, uncontaminated water or storm water therein.
Sample 1Sample 2Sample 3
Inspection manhole means a structure located on a site where required by the MWRD. The purpose of an inspection manhole is to provide access for the MWRD to sample and/or measure discharges. The manhole shall be designed in accordance with MWRD criteria.
Sample 1

Examples of Inspection manhole in a sentence

  • Inspection manhole to be placed on storm line prior to exiting the development.

  • A: The board of directors has set the close of business on March 31, 2010 as the record date for the determination of stockholders entitled to notice of and to vote at the meeting.

  • The following equipment shall be provided in each oil division: - Oil level indicator having the permitted maximum and minimum oil level alarm contacts.- Breathing device with “silica gel” material, which dehumidifies the air and which is placed at an accessible height.- Oil filling appliance- Drainage valve- Inspection manhole The oil level indicator that will be assembled on the vertical surface of the oil conservator shall be legible when viewed from the ground level of the tank.

  • The jet nozzle should be introduced to the system via the Inspection manhole and the integral inspection / maintenance tunnel.

  • Inspection manhole of adequate size, tray for inlet water distribution and collector system for filtered water shall be provided.

  • The following equipment shall be provided in each oil division: - Oil level indicator having the permitted maximum and minimum oil level alarm contacts.- Breathing device with “silica gel” material, which dehumidifies the air and which is placed at an accessible height.- Oil filling appliance- Drainage valve- Inspection manhole The oil level indicator that will be assembled on the vertical surface of the oil conservator shall be legible when viewed from the bottom level of the tank.

  • The following equipment shall be provided in each oil division:- Oil level indicator having the permitted maximum and minimum oil level alarm contacts.- Breathing device with “silicagel” material, which dehumidifies the air and which is placed at an accessible height.- Oil filling appliance- Drainage valve- Inspection manhole The oil level indicator that will be assembled on the vertical surface of the oil conservator shall be readable when viewed from the ground level of the tank.

Related to Inspection manhole

  • Onsite means within the Prescribed Premises boundary.

  • Home inspection means the on-site, physical review of the home of an applicant to assure the applicant and the home meets all health and safety requirements within these rules.

  • Inspection Period means the period beginning on the Effective Date and expiring at 5:00 p.m. eastern time on the forty-fifth day after the Effective Date.

  • Home inspection report means a written report that is

  • Inspection Report means the report delivered by the Master Servicer or the Special Servicer, as the case may be, substantially in the form of Exhibit L hereto.

  • Due Diligence Examination shall have the meaning set forth in Section 3.2.

  • Inspection means activities such as measuring, examining, testing, gauging one or more characteristics of the product or service and comparing the same with the specified requirement to determine conformity.

  • Inspections has the meaning set forth in Section 4.1.2.

  • The Site, where applicable, means the designated project place(s) named in the bidding document.

  • Site means the place or places where the permanent Works are to be carried out including workshops where the same is being prepared.

  • Final Inspection means the process and procedure described in UGC Section 12.1.

  • Initial inspection means the first on-site inspection of facilities to verify declarations submitted pursuant to Articles III, IV, V and VI and this Annex.

  • Buyer’s Representatives has the meaning set forth in Section 6.02.

  • Contractor’s Representative means the individual authorised to act on behalf of the Contractor for the purposes of the Contract. The initial Contractor’s representative is as indicated in the Form of Agreement.

  • Busy Line Verification (BLV) means a service whereby an End User requests an operator to confirm the busy status of a line.

  • Engineer’s Representative means the official in the civil/ electrical engineering department who is authorized to be in-charge of the work to which these presents relate. It shall include any other official nominated to attend to the supervision of day to day execution of the work to which this CONTRACT relates.

  • Contractor Project Manager means the employee identified in a Statement of Work as the Contractor project manager.

  • Train Loading Infrastructure means conveyors, stockpile areas, blending and screening facilities, stackers, re‑claimers and other infrastructure reasonably required for the loading of iron ore, freight goods or other products onto the relevant Railway for transport (directly or indirectly) to a loading port; and

  • Site Visit means a visit to the Site; and

  • Environmental Review means the Federal

  • Study Site means the location(s) under the control of the Institution where the Study is actually conducted as set out in Schedule 1.

  • SITE / LOCATION means any Site where BHARAT PETROLEUM CORPORATION LTD. desires to receive materials any where in India as mentioned in RFQ.

  • Environmental Consultant has the meaning set forth in Section 5.17(a).

  • Processing facility means an establishment that prepares, treats, or converts tangible personal property into finished goods or another form of tangible personal property. The term includes a business engaged in processing agricultural, aquacultural, or maricultural products and specifically includes meat, poultry, and any other variety of food processing operations. It does not include an establishment in which retail sales of tangible personal property are made to retail customers.

  • Inspection Fee means a fee payable to Lender or Loan Servicer for performing any inspection required by this Agreement in an amount not to exceed $500.00 per inspection.

  • Beam monitoring system means a system designed and installed in the radiation head to detect and measure the radiation present in the useful beam.