Examples of Measuring point in a sentence
K.4. Measuring point and price calculation K.4.01BOGE shall install a gauge (measuring point) that measures the compressed air in relation to the intake condition and the expanded condition, pursuant to PN2CPTC2 between the compressed air generation system and the compressed air pipe system of the customer.
Measuring point locations are on the joint, however, not accurately reported.
The measuring point is where the headform’s profile contacts the vehicle’s outer surface cross section in a vertical longitudinal plane through the center of gravity of the headform (see Figure 6A).3.21.2. "Measuring point" for the lower legform to bumper test and the upper legform to bumper test is located in the vertical longitudinal plane through the central axis of the impactor (see Figure 6B)."Paragraphs 3.21.
It is delivered as gas, but, since it is measured in calorific power this makes no difference between liquid or gaseous states.• Tariff code: 27112101• Measuring point: Measured at the delivery point.
Measuring point (number)Field type: SelectionAfter selection of a measuring point No., in the appropriate display field the current signals of the sampling point are displayed.Signal UAField type: DisplayThe amplified sensor signal is displayed in this field.
Measuring point As the service availability calculation is based on the registration of a trouble ticket, no specific measuring point is defined.
Measuring point for water level measurements, unless otherwise noted, shall be the top of the actual well casing.
In all cases, the result of the test shall be attributed to this point, independent of where the first contact occurs.3.21.1. "Measuring point" for the headform test means a point on the vehicle’s outer surface selected for assessment.
D = Bearing of mating shaftG = Required mating dimensions = Measuring point for operating temperature = Connector coding = Clamping screw with X8 hexalobular socket.
Figure 2 4.1.3.3Light source in the left inside of transparent LCD terminal Measuring point should be setted as P1 and P4.