Normal Capacity definition

Normal Capacity means 6,000 KW per hour per module or 72,000 KW per hour for the 12 module plant;
Sample 1Sample 2
Normal Capacity means the Plant both manufacturing and shipping 2,475,000 square feet of Canco Products during the same period of three (3) consecutive months in response to firm orders received by the Corporation in the normal course of business justifying the manufacturing of such quantity of Canco Products;
Sample 1
Normal Capacity means the Plant both manufacturing and shipping 2,475,000 square feet of Products during the same period of three (3) consecutive months in response to firm orders received by the Licensee in the normal course of business justifying the manufacturing of such quantity of Products;
Sample 1

Examples of Normal Capacity in a sentence

  • Each Asset Owner of a Jointly Owned Unit under the combined Resource option must submit a zero for the Minimum Emergency Capacity Operating Limit, Minimum Normal Capacity Operating Limit, Minimum Regulation Capacity Operating Limit, and Minimum Economic Capacity Operating Limit.

  • Such MW levels may include (i) dispatch below a Resource’s Minimum Economic Capacity Operating Limit down to Minimum Normal Capacity Operating Limit or Minimum Emergency Capacity Operating Limit as system conditions warrant or (ii) dispatch above a Resource’s Maximum Economic Capacity Operating Limit up to Maximum Normal Capacity Operating Limit or Maximum Emergency Capacity Operating Limit as system conditions warrant.

  • DESIGN REQUIREMENTSCapacity : 40 Litres Approximate Dimensions : 40 Litres Normal Capacity : 40 Litres + 2% Total height without lid : 591 mm ± 4 Maximum dia at base : 352 mm ± 3 Maximum dia at neck : 200 + 0.5 mmMinimum hardness : 85.0 B.H. Minimum anodizing film thickness: 12 MicronWeight (Minimum) : 6.5 kgs ISI Code: Each can should be marked with the ISI certification mark.

  • Factors for Capacity Reduction Due to Freeway Crashes (Normal Capacity = 1.000) Effect of Crash* Represents assumed values† Source: Chin, Franzese, Greene, & Hwang, November 2004 Multiple stochastic Monte Carlo runs were conducted for each simulation.

  • In response to BP Wind Energy, we note that proposed section 2.11.2 of Attachment AE specifies that, for the RUC processes and real-time balancing market, a Market Participant must submit resource offers for all its resources and must include in its resource offers the full amount of available physical capacity, as reflected in the resource’s submitted Maximum Normal Capacity Operating Limit and Maximum Emergency Capacity Operating Limit.

  • Hence for calculation of the Normal Capacity, period lost due to COVID19 situation (including partial / full shutdown, scaling down of manpower deployment, etc.) needs to be adjusted / reduced.

  • The Energy Storage System will not be regarded as faulty if it experiences a Normal Capacity Decrease.

  • NAANOVO, through NAANOVO MEXICO WTE S.A., shall provide the electric power output capacity provided in Section 4 of this Schedule in respect of the combined amount of Normal Capacity, which shall be the actual achieved net Kilowatt (KW) capability of the WTE plants constructed by NAANOVO.

  • Sales were expected to be 25 tonnes during the year and the plant actually produced 25.2 tonnes during the year.You are required to state the following figures: Rated Capacity; Practical Capacity Normal Capacity ; Actual Capacity.

  • So, in view of the above we suggest that based upon the guidelines issued by The Institute of Cost Accountants of India under Cost Accounting Standard-2, we should establish our Licensed, Installed capacity, Normal Capacity of the plant(s) and company as a whole along with capacity utilized, idle capacity and reasons thereof to control and reduce the cost of production.


More Definitions of Normal Capacity

Normal Capacity means, where the Customer is:
Sample 1
Normal Capacity is defined as the share of the policy that would otherwise be ceded to the Reinsurer automatically under this Agreement in the absence of a Jumbo Break.
Sample 1
Normal Capacity shall have the meaning set forth in Section 13.6(a).
Sample 1

Related to Normal Capacity

  • Nominal Capacity means the volume indicated by the manufacturer that represents the maximum recommended filling level.

  • Technical Capacity means the maximum firm capacity that the transmission system operator can offer to the network users, taking account of system integrity and the operational requirements of the transmission network;

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Local Capacity Area has the meaning set forth in the CAISO Tariff.

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • Storage Capacity means any combination of space, injectability and deliverability.

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Excess capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • Official capacity means (i) when used with respect to a Director, the office of Director of the Company, and (ii) when used with respect to a person other than a Director, the elective or appointive office of the Company held by such person or the employment or agency relationship undertaken by such person on behalf of the Company, but in each case does not include service for any other foreign or domestic corporation or any partnership, joint venture, sole proprietorship, trust, employee benefit plan or other enterprise.

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Nameplate Capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • Interruptible Capacity means capacity that may be interrupted by the Operator at any time in order to fulfil shippers’ nominations under a firm capacity reservation.

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • Available Capacity means the capacity from the Project, expressed in whole megawatts, that is available to generate Product. [For As-Available Product facilities only]

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;

  • Committed Capacity means that portion of the Capacity that is required to meet the Capacity Entitlements of Access Holders;

  • Annual Caps The annual caps for the transactions under the New Procurement Agreement for each of the three years ending 31 December 2016 are RMB3,000,000, RMB3,800,000 and RMB4,500,000. Such annual caps are determined based on (i) the historical transaction value of the fabric products purchased by Haosha Industry from Haosha Garments; (ii) the prevailing market price of similar products; and (iii) the expected increase in demand for such products by Haosha Industry in the coming three years.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.