Operating temperature definition

Operating temperature means the temperature of the vessel from which a sample is collected. If no vessel temperature gauge is available or the difference between the sampling train temperature gauge reading and the vessel temperature gauge reading is greater than +/- 4 oF, then the sampling train temperature gauge reading shall be used to record the temperature on Form 1.
Sample 1Sample 2Sample 3
Operating temperature means the reference temperature inside a compartment during testing;
Sample 1Sample 2Sample 3
Operating temperature means the reference temperature inside a compartment
Sample 1Sample 2

Examples of Operating temperature in a sentence

  • Storing after installation :- Operating temperature : +15 / +35 °C / +59 / +138.2° F- Protect the whole against dust, water tricling, dampness and shocks.

  • Other aluminum electrolytic capacitors have smaller capacitance, larger tan δ, and larger impedance as well as equivalent series resistance (ESR).(2) Effects of frequency on electrical parametersAt higher frequency capacitance and impedance decrease while tanδ increases.At lower frequency, heat generated by ripple current will rise due to an increase in equivalent series resistance (ESR).1.2 Operating temperature and life expectancy(1) Expected life is affected by operating temperature.

  • Operating temperature range should be (-) 5 degree centigrade to 50 degree centigrade of reputed make such as EPSON/TVS/WIPRO/HCL.

  • Storing before installation :- Storing ambient temperature : 0 / +50 °C / 0 / +122°F- Protect the whole against dust, water trickling, dampness and shocks.Storing after installation :- Operating temperature : +15 / +35 °C / +59 / +138.2° F- Protect the whole against dust, water tricling, dampness and shocks.

  • Operates with input voltages between 6 VDC and 30 VDC.g. RS-232 interface with 115.2 kbps capability.h. Operating temperature of -40°C to +75°C.


More Definitions of Operating temperature

Operating temperature means the target storage temperature which is intended to be maintained within the appliance(s) served by the condensing unit
Sample 1Sample 2
Operating temperature means the temperature of the cooled liquid at the outlet of the evaporator
Sample 1Sample 2
Operating temperature means the working temperature of the pressurized primary separator from which a sample is gathered.
Sample 1Sample 2
Operating temperature means the range of integrated average temperatures at which a self- contained commercial refrigeration unit or remote-condensing commercial refrigeration unit with a thermostat is capable of operating or, in the case of a remote-condensing commercial refrigeration unit without a thermostat, the range of integrated average temperatures at which the unit is marketed, designed, or intended to operate.‌
Sample 1
Operating temperature means the temperature that characterizes the conditions of crude oil, condensate, or produced water inside a particular process, pipeline, vessel or tank.
Sample 1
Operating temperature. MAXIMUM: 40 degrees Celsius MINIMUM: 10 degrees Celsius SCHEDULE E ---------- PRODUCT MAINTENANCE SCHEDULE RFU MAINTENANCE SCHEDULE Diagnostic checks are performed on the RFU remotely from the SCC to insure that the RFU is configured properly and operating within its specified requirements. RFU preventive maintenance should occur once every 6 months and is limited to inspection of the unit. Preventive maintenance consists of the following: . Visual inspection of the RFU cabinet for physical damage . Inspection and cleaning of the air filter at the rear of each unit . Checking cables at the rear of the RFU to insure that all connections are solid and secure . Checking the operation of the air circulation fans and hard disk drive within the unit by listening for unusual noises . Visual inspection of all lights and indicators on the front of the RFU to insure that they are operating as specified SCC MAINTENANCE SCC Maintenance is 24 x 7 support coverage with four (4) hour on-site support coverage.
Sample 1
Operating temperature means the steady-state temperature of the vessel from which a sample is collected. If no temperature gauge is available or
Sample 1