Physical alterations definition

Physical alterations means human-induced changes to the physical structure of the waterbody.
Physical alterations means human-induced changes to the physical structure of the water body.

Examples of Physical alterations in a sentence

  • Physical alterations to existing spectator accomodation should, where possible, follow the Sports Grounds Safety Authority (SGSA) 6th Edition Green Guide.

  • Physical alterations to smaller streams can potentially have significant impact on overall water quality.

  • Physical alterations must be performed on livestock at a reasonably young age and in a way that minimizes pain and stress.MammalsAll planned materials and procedures must be listed in the Organic System Plan.

  • Physical alterations to habitat can occur from the construction, presence, and eventual decommissioning and removal of facilities such as islands or platforms, storage and production facilities, and pipelines to onshore common carrier pipelines, storage facilities, or refineries.

  • Physical alterations to your residence, including but not limited to: smoke detectors, access ramps, stair lifts,installation of covered items Private room in a hospital.

  • Physical alterations, both permitted and not, are extensive and typically poorly documented.

  • Physical alterations to the land surface change the hydrologic functioning of aquifer recharge areas, drainages and receiving waters.

  • If the financial need is then calculated at $1 or more, the student is eligible for CSG-DSE funding alone (and not other Student Financial Assistance).Capital costs are not eligible, such as:• Vehicle modifications;• Physical alterations to an educational institution; or,• Physical alterations to a student residence.

  • Physical alterations are not planned with this application for General Development Plan.

  • Physical alterations include weirs, dams, reservoirs, canalisation, straightening, bed stabilisation, and bank reinforcement and embankment.The stepwise evaluation scheme of the CIS Guidance nº432 has been partially followed, i.e. up to step 9 (designation of HMWB), but the Good Ecological Potential has not been defined (see below).The mitigation measures needed to reach good ecological status were evaluated.

Related to Physical alterations

  • Structural Alterations means any Alterations involving the structural, mechanical, electrical, plumbing, fire/life safety or heating, ventilating and air conditioning systems of the Building.

  • Structural alteration means an Alteration that (i) will result in a change in the footprint of the Improvements, (ii) involves the addition of one or more floors to the Improvements, (iii) affects the structural elements or any exterior walls of the Improvements, (iv) decreases the rentable square footage of the Leased Premises other than to a de minimis extent or (v) adversely affects the proper functioning and/or capacity of the building systems in the Improvements.

  • Specialty Alterations means Alterations consisting of kitchens, executive bathrooms, raised computer floors, computer installations, vaults, libraries, internal staircases, dumbwaiters, pneumatic tubes, vertical and horizontal transportation systems, and other Alterations of a similar character.

  • Substantial alteration means an alteration that has a major impact on the architectural features, characteristics, appearance, or integrity of a structure or lot. The term does not include routine maintenance that is reasonably necessary to maintain a dealership facility in attractive condition and does not include any changes to items protected by federal intellectual property rights.

  • Alterations means all changes, additions, improvements or repairs to, all alterations, reconstructions, renewals, replacements or removals of and all substitutions or replacements for any of the Improvements or Equipment, both interior and exterior, structural and non-structural, and ordinary and extraordinary.

  • Major Alteration means change other than repair or replacement of building materials or equipment with materials and equipment of a similar type.

  • Installation Work means the construction and installation of the System and the Start-up, testing and acceptance (but not the operation and maintenance) thereof; all performed by or for the Power Producer at the Premises.

  • Material Alteration shall have the meaning set forth in Section 4.1.11.

  • Installation Works means, as the context so requires,

  • Tenant Improvements Defined in Exhibit B, if any.

  • Erection, construction, remodeling, repairing means all types of work done on a particular building or work at the site thereof in the construction or development of the project, including without limitation, erecting, construction, remodeling, repairing, altering, painting, and decorating, the transporting of materials and supplies to or from the building or work done by the employees of the Contractor, Subcontractor, or Agent thereof, and the manufacturing or furnishing of

  • Interior means the spaces, parts, components or elements of an individual dwelling unit.

  • Tenant Improvement Work means the construction of the Tenant Improvements, together with any related work (including demolition) that is necessary to construct the Tenant Improvements.

  • Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term "TRADE FIXTURES" shall mean Lessee's machinery and equipment which can be removed without doing material damage to the Premises. The term "ALTERATIONS" shall mean any modification of the improvements on the Premises which are provided by Lessor under the terms of this Lease, other than Utility Installations or Trade Fixtures. "LESSEE-OWNED ALTERATIONS AND/OR UTILITY INSTALLATIONS" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Lessor's consent but upon notice to Lessor, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cumulative cost thereof during the term of this Lease as extended does not exceed $2,500.00.

  • Premises Building Partial Damage means if the Building of which the Premises are a part is damaged or destroyed to the extent that the cost to repair is less than fifty percent (50%) of the then Replacement Cost of the building.

  • demolition work means a method to dismantle, wreck, break, pull down or knock down of a structure or part thereof by way of manual labour, machinery, or the use of explosives;

  • Repairs means the repairs to be made to the Mortgaged Property, as described on the Repair Schedule of Work (Exhibit C) or as otherwise required by Lender in accordance with this Loan Agreement.

  • Utility Installation means carpeting, window coverings, air lines, power panels, electrical distribution systems, lighting fixtures, space heaters, air conditioning, plumbing, and fencing. Lessor may require that Lessee remove any or all of said alterations, improvements, additions or Utility Installations at the expiration of the term, and restore the Premises to their prior condition. Lessor may require Lessee to provide Lessor, at Lessee's sole cost and expense, a lien and completion bond in an amount equal to one and one-half times the estimated cost of such improvements, to insure Lessor against any liability for mechanic's and materialmen's liens and to insure completion of the work. Should Lessee make any alterations, improvements, additions or Utility Installations without the prior approval of Lessor, Lessor may require that Lessee remove any or all of the same.

  • Demolition works means any physical activity to tear down or break up a structure (or part thereof) or surface, or the like, and includes the loading of demolition waste and the unloading of plant or machinery.

  • Leasehold Improvements means all buildings, structures, improvements and fixtures located on any Leased Real Property which are owned by any Group Company, regardless of whether title to such buildings, structures, improvements or fixtures are subject to reversion to the landlord or other third party upon the expiration or termination of the Lease for such Leased Real Property.

  • Substitute Improvements means the substitute or additional improvements of the Issuer described in Article V hereof.

  • Building, structure, facility, or installation means all of the pollutant-emitting activities which belong to the same industrial grouping, are located on one or more contiguous or adjacent properties, and are under the control of the same person (or persons under common control) except the activities of any vessel. Pollutant-emitting activities shall be considered as part of the same industrial grouping if they belong to the same major group (i.e., which have the same two-digit code) as described in the Standard Industrial Classification Manual, 1972, as amended by the 1977 Supplement (U.S. Government Printing Office stock numbers 4101-0066 and 003-005-00176-0, respectively).

  • Installations means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.

  • Site Improvements means any construction work on, or improvement to, streets, roads, parking facilities, sidewalks, drainage structures and utilities.

  • Installation Site means the site at which the Product is originally installed.

  • Communications Equipment means the communications equipment of the Licensee and its affiliates, including, without limitation, cabinets, racks, electronic equipment and other similar equipment.