Pressure Testing definition

Pressure Testing means the hydrostatic or pneumatic testing of a pipeline to ensure its integrity and includes fabrication, joining, and dismantling of all pipe, hoses, fittings, pumps, compressors, test heads, valves, blanks, pressure manifolds, boilers and xxxxxxx filters including that pipe and equipment required to fill with test medium, test, expel test medium, and air dry. It is recognized that this work shall be performed by members of the United Association.
Sample 1Sample 2Sample 3
Pressure Testing means a procedure used to determine if the seal can withstand pressures as determined in the Work Plan.
Sample 1Sample 2

Examples of Pressure Testing in a sentence

  • To the extent permitted by applicable Law, it is the intention of the City not to adjust the currently existing Mandatory Tap Ordinance, Pressure Testing Ordinance or applicable Street Opening Ordinance such that and to the extent that any such future adjustment would result in a material adverse effect on Assets as purchased by Buyer hereunder; provided that this sentence shall survive only for 20 years after the Closing, at which point this sentence shall automatically terminate.

  • See Project Specification 5578-E2-SP-IU-00005, Instrument Piping – Field Pressure Testing.

  • This agreement set outs the framework for the Blood Pressure Testing Service during normal hours [the pharmacies core plus supplementary hours] from a community pharmacy, and has been agreed with Community Pharmacy Humber (Humber LPC).

  • Hydrostatic Pressure Testing of Natural Gas and Petroleum Tanks and/or Pipelines Wastewater For discharges of these wastewaters, please provide the following information, in accordance with Section 5(a)(3)(C) of the Comprehensive General Permit: a.

  • No Hydrostatic Pressure Testing will be conducted on the Property.

  • Appendix: 2 BP+ check patient pathway Blood Pressure Testing Done under the Service Pulse Check Done under the Service Patient Arrives in Pharmacy for BP + - Eligibility Criteria checked - Patient suitable for BP + Service NO Patient is not screened for AF through AliveCor and no further action required.

  • Pressure Testing: The Developer shall furnish all labor, materials and equipment for performing pressure tests in the presence of Ridgewood Water, including calibrated pressure gauges, test bulkheads, filling, draining, and air release connections and valves, calibrated drum and test pump.

  • Discharge Type (check all types that could be discharged at a single discharge location): Noncontact Cooling Water Water Treatment Wastewater Hydrostatic Pressure Testing of Natural Gas/Petroleum Tanks and/or Pipelines Wastewater Fire Suppression System Testing Wastewater Geothermal Heat Pump Water, Residential Building Geothermal Heat Pump Water, Residential Institution or Nonresidential Building 3.

  • GROUP Sprayer, Metal Operator, Metal Cleaning Expediter, Expediter, Plater 'A' Plater Finisher, Surface Finisher, Machined Parts Operator, Polishing Machine Inspector, Pressure Testing Grinder, Precision General Grinder, General Operator, Polishing Machine Treater, Steel Inspector, Non-Destructive Senior Inspector, Non-Destructive Testing Specialist Inspector, Non-Destructive Testing 'A' Inspector, Non-Destructive Testing General JOB LEVEL CODE NO.

Related to Pressure Testing

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • Pressure means the total load or force per unit area acting on a surface.

  • Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Pressure vessel means containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source, or any combination thereof.

  • Cannabis testing facility means an entity registered by

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.