Protection Configuration definition

Protection Configuration. An engineering plan under which channel capacity is protected either on a fully redundant basis or on a 1 x n protection basis.
Sample 1Sample 2Sample 3

Examples of Protection Configuration in a sentence

  • Loop Protection Configuration • General Settings– Enable Loop Protection: Controls whether loop protections are enabled (as a whole).– Transmission Time: The interval between each loop protection PDU sent on each port.

  • The tamper system also has an internal resettable event counter with programmable trigger threshold and refresh periods to mitigate false positive tamper events.For more information about this feature, see AN1247: Anti-Tamper Protection Configuration and Use.

  • I.e. if previous to the outsourcing of the data it is required the approval of a privacy officer, the approval will be inputted to the engine as an external event, routed through this component, which will translate REST API Calls to a jPBM event.•The Protection Configuration Executor that will process requests to execute protection configurations.

  • Table of Contents Section 11 Mechanical Specifications Page 8 Section 15 Antenna Specification Page 9 Section 16 Protection Configuration Specification Page 9 The specifications listed in the following sections are the minimum or guaranteed specifications, over the environmental ranges specified, for the P-Com Tel-Link 38 E1 radio system provided to Siemens.

  • Optional protection configurations are: Protection Configuration IdentifierLong Time/Short Time LSLong Time/Instantaneous LI Long Time/Short Time/Instantaneous LSI Long Time/Short Time/Ground Fault LSG Long Time/Instantaneous/Ground Fault LIG Long Time/Short Time/Instantaneous/Ground Fault LSIG The trip unit that may be used with a specific circuit breaker is identified on the front cover label.

  • Protection Configuration Register PC2 PC2: Protection Configuration Register 2 1)Address: 0x01 U U R/W-0 R/W-0 R/W-1 R/W-0 R/W-0 R/W-0 Note that the overvoltage and undervoltage protection thresholds and Power Good limits are defined as percentages of the output voltage.

  • Hence the youth were not in direct touch with EDC but had to be connected via the CBFs for their activities.

  • The Machine Protection Configuration is stored in an internal flash memory chip within the SILver rack.

  • Table of Contents Section 11 Mechanical Specifications Page 8 Section 16 Protection Configuration Specification Page 9 The specifications listed in the following sections are the minimum or guaranteed specifications, over the environmental ranges specified, for the P-Com Tel-Link 38 E1 radio system provided to Siemens.

  • All Equipment at each Site shall have a minimum battery reserve (assuming a 1 x 7 Protection Configuration) as set forth in Exhibit A-3 to this Schedule A.

Related to Protection Configuration

  • Configuration means State-specific changes made to the Software without Source Code or structural data model changes occurring.

  • Access Card means an ATM card, debit card or credit card and includes our Visa Card

  • Connectivity means the provision of a Permanent Separated Bicycle Lane system that reflects desired routes between all major origins and destinations in the city.

  • Layout means a conceptual drawing sufficient to provide for the specified stormwater management facilities required at the time of approval.

  • Network Upgrades means modifications or additions to transmission-related facilities that are integrated with and support the Transmission Provider’s overall Transmission System for the general benefit of all users of such Transmission System. Network Upgrades shall include:

  • Interface means the mixture occurring in pipeline operations between adjoining batches having similar or dissimilar physical characteristics.

  • functionality means the ability of a tenderer to provide goods or services in accordance with specifications as set out in the tender documents.

  • Service Specification means and include detailed description, statements to technical data, performance characteristics, and standards (Indian as well as) as applicable and as specified in the Contract as well as those specifications relating to Industry standards and codes applicable to the performance of the work, work performance quality and the specifications affecting the works or any additional specification required to be produced by the DCO to meet the design criteria.

  • Maintenance Manual shall have the meaning ascribed to it in Clause 10.7; “Maintenance Programme” shall have the meaning set forth in Clause 14.3; “Maintenance Period” shall have the meaning set forth in Clause 14.1; “Maintenance Requirements” shall have the meaning set forth in Clause14.2;

  • Service Specifications means the following documents, as applicable to the Services under Your order: (a) the Oracle Cloud Hosting and Delivery Policies, the Program Documentation, the Oracle service descriptions, and the Data Processing Agreement described in this Schedule C; (b) Oracle’s privacy policies; and (c) any other Oracle documents that are referenced in or incorporated into Your order. The following do not apply to any non-Cloud Oracle service offerings acquired in Your order, such as professional services: the Oracle Cloud Hosting and Delivery Policies, Program Documentation, and the Data Processing Agreement. The following do not apply to any Oracle Software: the Oracle Cloud Hosting and Delivery Policies, Oracle service descriptions, and the Data Processing Agreement.

  • Customization means any customer-specific modification to software that requires changes to the software’s source code.

  • Profile means a building's cross-sectional shape or the shape of its outline.

  • Upgrade means a major version upgrade of any Platform software.

  • technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;

  • Customer Proprietary Network Information (“CPNI”) is as defined in the Act.

  • Interconnection Provider means PacifiCorp Transmission.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Design flow means the average annual flow or average daily flow specified in an approved facilities plan or approved plans and specifications, the flow specified in a WPDES permit, or the flow required to meet performance standards.

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • Hardware means all mainframes, midrange computers, personal computers, notebooks, servers, switches, printers, modems, drives, peripherals and any component of any of the foregoing.

  • Encryption means methods of rendering personally identifiable information unusable, unreadable, or indecipherable to unauthorized persons through the use of a technology or methodology specified or permitted by the Secretary of the United States Department of Health and Human Services in guidance issued under 42 USC Section 17932(h)(2).

  • Peer support specialist means an individual who has experienced a severe and persistent mental illness and who has successfully completed standardized training to provide peer support services through the medical assistance program or the Iowa Behavioral Health Care Plan.

  • Supplier of water means any person who owns or operates a public water system.

  • Customer Systems means the Customer's information technology infrastructure, including computers, software, hardware, databases, electronic systems (including database management systems) and networks, whether operated directly by Customer or through the use of third-party services.

  • Interoperability means the ability of a CenturyLink OSS Function to process seamlessly (i.e., without any manual intervention) business transactions with CLEC's OSS application, and vice versa, by means of secure exchange of transaction data models that use data fields and usage rules that can be received and processed by the other Party to achieve the intended OSS Function and related response. (See also Electronic Bonding.)

  • Maintenance Services means SAP’s then-current maintenance and/or support services offered under and described in detail in the applicable SAP PartnerEdge Model.