Protective casing definition

Protective casing means the well casing providing the primary sanitary protection and that is grouted in place to a depart- ment approved depth.
Sample 1Sample 2Sample 3
Protective casing means the casing set from a point below the frost line and extends at least 1 1/2 feet above the finished grade. The bottom of the casing must be at least 2 feet below ground surface. This casing is set to protect the monitoring well from damage.
Sample 1

Examples of Protective casing in a sentence

  • Protective casing damaged during water line repair, will be repaired when roadway is re-paved.

  • Protective casing should be installed around each monitoring well the same day as initial grout placement.

  • Note 1: "Protective casing" means a closed cover in the form of a pipe or other closed ducts of non-circular shape.Note 2: "Plastics" means both thermoplastic and thermosetting plastic materials with or without reinforcement, such as PVC and fibre reinforced plastics - FRP.Note 3: Cable trays/protective casings made of plastic materials are to be type tested in accordance with IACS REC 73.

  • Protective casing detail.facilitate the proper placement of casing, screen, granular filter, and seal.

  • Well Casing Material Protective casing of wrought iron or steel shall have minimum weights and thickness as specified in AWWA’s Standard A100 for Water Wells.

  • Protective casing that is to be grouted in the drill hole should have sufficient guides welded to the casing to permit the unobstructed flow and disposition of the thickness of grout specified.

  • Protective casing should be installed to at least 25 feet and the well should be grouted to a minimum depthof10feet to protect the well against contamination from the surface.

  • Protective casing and locking well caps must be installed, and any other necessary measures must be taken to ensure that the monitoring well is protected from vandalism and accidental damage.

  • Protective casing and flush mounts will be installed into this concrete.Each well will be properly labeled on the exterior of the locking cap or protective casing with a metal stamp indicating the permanent well number.

  • ECE/TRANS/WP.15/AC.2/2016/41 Proposal 1 — 9.3.x.0.3 (request of EBU/ERSTU/ESO) WoodAluminium alloysPlastic materialsRubberGangwaysXXX External ladders and passageways (gangways) XX Chocking of cargo tanks which are independent of the vessel’s hull and chocking of installations and equipment X X Masts, flagpoles and similar round timberXXX Engine parts XX Protective casing of motors and pumps X Parts of the electrical installation, including insulation, gaskets, etc.

Related to Protective casing

  • Skilled Nursing Facility means an institution or part thereof that is licensed as a Skilled Nursing Facility by the State of Florida, and is accredited as a Skilled Nursing Facility by The Joint Commission or recognized as a Skilled Nursing Facility by the Secretary of Health and Human Services of the United States under Medicare.

  • Step therapy means a protocol or

  • Non-Administrator Skilled Nursing Facility means a Skilled Nursing Facility which does not have an agreement with the Claim Administrator or another Blue Cross and/or Blue Shield Plan but has been certified in accordance with guidelines established by Medicare.

  • Fugitive emissions means those emissions which could not reasonably pass through a stack, chimney, vent, or other functionally equivalent opening.

  • Nonattainment area means an area so designated by the administrator, acting pursuant to Section 107 of the Act.