Quality factor (Q) means the modifying factor, listed in Tables I and II of 38.4(4), that is used to derive dose equivalent from absorbed dose.
Sustainability Factors means environmental, social and employee matters, respect for human rights, anti‐corruption and anti‐bribery matters.
Capacity factor means the ratio of the average load on a machine or equipment for the period of time considered to the capacity rating of the machine or equipment.
Reliability means the degree of performance of the bulk electric system that results in electricity being delivered within Reliability Standards and in the amount desired. Electric system Reliability can be addressed by considering two basic and functional aspects of electric systems, which are Adequacy and Security.
Load Factor means the percentage of aircraft seats actually occupied on a flight (RPMs divided by ASMs). “NMB” means the National Mediation Board.
Weighting factor wT for an organ or tissue (T) means the proportion of the risk of stochastic effects resulting from irradiation of that organ or tissue to the total risk of stochastic effects when the whole body is irradiated uniformly. For calculating the effective dose equivalent, the values of wT are:
Power Factor means the ratio of usage power measured in kW to total power measured in kVA;
Loss Factor means the scaling factor determined in accordance with clause 7 and applied by the reconciliation manager to volumes of electricity measured or estimated in respect of ICPs on the Network, in order to reflect the impact of the ICP on Losses within the Network;
Moody’s Discount Factor means, for purposes of determining the Discounted Value of any Moody’s Eligible Asset, the percentage determined by reference to the rating on such asset and the shortest Exposure Period set forth opposite such rating that is the same length as or is longer than the Moody’s Exposure Period, in accordance with the table set forth below: Exposure Period Aaa* Aa* A* Baa* Other** (V)MIG-1*** SP-1+**** Unrated***** 7 weeks 151% 159% 166% 173% 187% 136% 148% 225% 8 weeks or less but greater than seven weeks. 154 161 168 176 190 137 149 231 9 weeks or less but greater than eight weeks 158 163 170 177 192 138 150 240 * Mxxxx’x rating. ** Municipal Obligations not rated by Moody’s but rated BBB by S&P. *** Municipal Obligations rated MIG-1 or VMIG-1, which do not mature or have a demand feature at par exercisable in 30 days and which do not have a long-term rating. **** Municipal Obligations not rated by Moody’s but rated SP-1+ by S&P, which do not mature or have a demand feature at par exercisable in 30 days and which do not have a long-term rating. ***** Municipal Obligations rated less than Baa3 or not rated by Moody’s and less than BBB or not rated by S&P, not to exceed 10% of Moody’s Eligible Assets. Notwithstanding the foregoing, (i) except as provided in clause (ii) below, the Moody’s Discount Factor for short-term Municipal Obligations will be 115%, so long as such Municipal Obligations are rated at least MIG-1, VMIG-l or P-1 by Moody’s and mature or have a demand feature at par exercisable in 30 days or less, or 125%, as long as such Municipal Obligations are rated at least A-1+/AA or SP-1+/AA by S&P and mature or have a demand feature at par exercisable in 30 days or less, (ii) the Moody’s Discount Factor for residual interest municipal bonds and structured notes shall be the product of (x) the percentage determined by reference to the rating on the security underlying such residual interest municipal bond multiplied by (y) 1.25 (provided that the trust in which such residual interest municipal bond is held may be terminated within five business days), and (iii) except as provided in clause (ii) above, no Moody’s Discount Factor will be applied to cash, Receivables for Municipal Obligations Sold, or futures, options and similar instruments (to the extent such securities are Moody’s Eligible Assets); provided, however, that for purposes of determining the Moody’s Discount Factor applicable to a Municipal Obligation, any Municipal Obligation (excluding any short-term Municipal Obligation) not rated by Moody’s but rated by S&P shall be deemed to have a Mxxxx’x rating which is one full rating category lower than its S&P rating.
Fit factor means a quantitative estimate of the fit of a particular respirator to a specific individual, and typically estimates the ratio of the concentration of a substance in ambient air to its concentration inside the respirator when worn.
Transmission Reliability Margin or “TRM” shall mean the amount of transmission transfer capability necessary to provide reasonable assurance that the interconnected transmission network will be secure. TRM accounts for the inherent uncertainty in system conditions and the need for operating flexibility to ensure reliable system operation as system conditions change.
Fitch Discount Factor means the discount factors set forth in the Fitch Guidelines for use in calculating the Agency Discounted Value of the Company’s assets in connection with Fitch’s ratings then assigned on the Preferred Shares.
Turbidity means the cloudy condition of water due to the presence of extremely fine particulate materials in suspension that interfere with the passage of light.
Adjustment Factor means, with respect to a share of the Fund (or one unit of any other security for which a Fund Closing Price must be determined), 1.0, subject to adjustment in the event of certain events affecting the shares of the Fund. See “—Anti-dilution Adjustments Relating to the Fund; Alternate Calculation —Anti-dilution Adjustments” below.
Service Level means the standard set forth below by which IBM measures the level of service it provides in this SLA.
Reserve Penalty Factor means the cost, in $/MWh, associated with being unable to meet a specific reserve requirement in a Reserve Zone or Reserve Sub-zone. A Reserve Penalty Factor will be defined for each reserve requirement in a Reserve Zone or Reserve Sub-zone.
Stress Factor means 2.25.
Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.
Service Level Credit is defined in Section 8.
Performance Factor means any matter that could or will significantly affect a party’s ability to fulfill its obligations under this Agreement;
Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.
RBC level means an insurer's company action level RBC, regulatory action level RBC, authorized control level RBC, or mandatory control level RBC where:
Class Factor As to any date of determination and any Class of Certificates (other than the Interest Only Classes and the Residual Certificates), a fraction the numerator of which is (i) the aggregate of the denominations of all Certificates of such Class plus, in the case of each Accrual Class, all interest that has accrued on the Certificates of such Class prior to such date of determination and been added to the Class Balance thereof, less (ii) the aggregate amount of all Principal Distribution Amounts, if any, allocable thereto prior to such date of determination and the denominator of which is the original Class Balance of such Class. As to any date of determination and any Interest Only Class, a fraction, the numerator of which is the percentage of the balance specified for such purpose under “Reference Sheet–Notional Classes” in the Prospectus Supplement (or, if applicable, the sum of the applicable percentages of the balances so specified) and the denominator of which is the original Class Balance thereof. Code: The Internal Revenue Code of 1986, as amended, including any successor or amendatory provisions.
Interest Factor means monthly compounding, discounting or annuitizing, as applicable, at a rate set forth in Exhibit A.
PJM Region Reliability Requirement means, for purposes of the Base Residual Auction, the Forecast Pool Requirement multiplied by the Preliminary PJM Region Peak Load Forecast, less the sum of all Preliminary Unforced Capacity Obligations of FRR Entities in the PJM Region; and, for purposes of the Incremental Auctions, the Forecast Pool Requirement multiplied by the updated PJM Region Peak Load Forecast, less the sum of all updated Unforced Capacity Obligations of FRR Entities in the PJM Region.