Safe state definition

Safe state means an operating mode in case of a failure of an item without an unreasonable level of risk.

Safe state means state of the reactor facility, following an anticipated operational occurrence or accident conditions, in which the reactor is subcritical and the main safety functions can be ensured and maintained stable for a long time;

Safe state means a plant state, following an anticipated operational occurrence or accident conditions, in which the reactor is subcritical and the main safety functions can be ensured and maintained stable for a long time.

Examples of Safe state in a sentence

• To download a complete copy of Dig Safe state laws and rules, please go to digsafe.com – “Laws & Enforcement.”Color Coding SystemDig Safe System, Inc.

• Subsequently the system can be in either of the following states:• Safe state: Such a state occur when the system can allocate resources to each process (up to its maximum) in some order and avoid a deadlock.

• There are two operation states of the TAP Building in the beryllium phase: Operational State Control philosophyOperation in the workshop on FW panels • Operator in the Be facility No operation but FW panels in the workshop and in storage area• No operator in the Be facility.• Safe state: workstations are shutdown, doors are closed and HVAC working.

• For every safety goal a Safe state, if applicable, shall be identified in order to declare a system state to be maintained or to be reached when the failure is detected, so to allow a failure mitigation action without any violation of the associated safety goal.

• This command will cause the Alice instrument to terminate the completed acquisition command and return to the Safe state.

• Safe state: is that state in which processes are run in sequence or we can say that the operating system can allocate resources to each requesting process in some order and still avoid deadlock.

• Safe state is a stable in dynamic simulations, no extra generators are tripped, no thermal nor voltage violations occurred.

• Safe state for the detection function is achieved when a signal is sent from the F&G node.

• However, the request by process P2 is granted, refer Table 4.9. The system is in Safe state.

• The definition of each state is shown as following:- Safe state: contains at least one resource allocation sequence that can make all processes finish safely at the current state.- Unsafe state: contains resource allocation sequences which always result in a deadlock at the current state.Suppose a system with n processes (P1, P2，…，Pn)and m resources (R1, R2,…, Rm).- The matrix of the maximum demand is formulated as Max(i,j)=k.

More Definitions of Safe state

Safe state. Means of indication (visual or audible) or instruction to determine if the system is in a safe state shall be provided by the manufacturer.2. General Safety 2.1 Secure design To prevent theft or tampering, critical accessible components of the NSSS shall be assembled or affixed in such a way as to deter removal or dismantling by unauthorized parties.2.2 Operating conditions 2.2.1 Ambient temperature range NSSS shall operate safely and reliably in environments with ambient temperatures at a minimum range from 5°C to 50°C, the requisite primary range for all systems complying with this document. Technologies designed to operate outside the primary range shall additionally demonstrate their capability to operate safely and reliably in these expanded ambient temperature ranges (ISO30500, 2018)).2.2.2 Ambient air humidity Operate safely and reliably in ambient air humidity conditions at a minimum range from 20% to 100%. Technologies designed for use in air humidity below 20% shall additionally demonstrate their capability to operate safely and reliably in these expanded ambient air humidity ranges (ISO, 2018).2.3 General safety design requirements 2.3.1 Safety of edges, angles, and surfaces Surfaces and parts of NSSS with which users or service personnel can come into contact shall be free from rough or sharp edges or unnecessarily sharp points.2.3.2 Fire and explosion protection 2.3.3 Structural integrity 2.3.4 Underground systems 2.3.5 External impacts 2.3.6 Safety assessment The manufacturer of a NSSS shall carry out either an iterative risk assessment or an equally effective assessment capable of demonstrating proven safety of NSSS. The safety assessment shall: (i) determine the particular health and safety requirements that apply to the product, (ii) determine risk-mitigating measures to be taken, and (iii) demonstrate the safety of the product by documenting the results of the safety assessment. This assessment shouldbe carried out during the design process; however, the assessment may be carried out after the design process (ISO30500, 2018).3 Requirements for sanitation system components 3.1 General requirements Critical materials, equipment, components, connections, and joining elements of the NSSS that are indispensable to the proper operation of the system shall be selected based on their suitability for sanitation applications (ISO30500, 2018).3.2 Hygienic design NSSS shall be designed in such a way as to mitigate any risk of infection due to potenti...

Safe state means the Safe State Program, a division of the University of Alabama, designated by statute as the state accreditation agency for lead hazard training.

Safe state means the Safe State Program, a division of the University of Alabama, designated by statute as the state accreditation agency for lead hazard training.