Sample Point definition

Sample Point means the location from which a water sample is collected. Such locations include source waters, between or after individual treatment process, storage tanks, entry points to the distribution system, or any location within a distribution system. Each sample point is designated by a unique identification number and a descriptive location name.
Sample 1Sample 2Sample 3
Sample Point means a location approved by the District, from which wastewater can be collected that is representative in content and consistency of the entire flow of wastewater being sampled
Sample 1Sample 2
Sample Point means a single data point which is used along with multiple other data points in the development of a Performance Assessment;
Sample 1Sample 2

Examples of Sample Point in a sentence

  • The Achieved TOR1 will be calculated for each Sample Point during the TOR1 Period as the Providing Unit Output minus the Providing Unit Pre-Event Output.

  • Otherwise a Fail is awarded (S1=0).At each Sample Point, a tolerance of the maximum of 10 % of the Expected response at the sample point or 1 MW applies (if 1 MW is greater than 50% of the Expected FFR Response then a tolerance of 50% of the Expected FFR Response is applied).

  • For each sample submitted the sample worksheet will include the following details: Licensee ID/Name Sample Point DPID Sample ID Date Sample Taken Time Sample Taken Name of Person Taking the Sample On-Site pH Test Result (if required) On-Site Temperature (if required) Observation Comments.

  • SUA–1471 is amended by this Confirmatory Order to read as follows: ‘‘Implement the corrective action program described in the September 15, 1989 submittal, as modified by the reverse osmosis system described in the January 15, 1998 submittal, excluding all sampling and reporting requirements for Sample Point 1, with the objective of achieving the concentrations of all constituents listed in License Condition 35B.

  • If pretreatment samples can not be obtained, please explain under "Description of Sample Point" on Module 8.1(A).

  • Example of wooden stakes marking plot and subplot corners (Site 2 Sample Point 1).

  • Table 2-1 Sample Coordinates, Cape St. Marys SCH Sample Point / Sample ID The marine surface sediment grab samples were manually collected by Dillon personnel at the site.

  • Grease Interceptor Trap – Outlet to sewer Sample Point 1 The Discharge Acceptance point (D.A.P) is also marked on the Site Plan annexed to this Agreement.

  • Example of steel pin at sample point center (Site 1 Sample Point 1).Figure 4.

  • For a detailed description see Appendix B: Sample Point Sheet Dialectical Behavioral Therapy in Schools Dialectical Behavior Therapy (DBT) is a cognitive behavioral treatment that research has shown to be effective in treating a wide range of social/emotional disorders.


More Definitions of Sample Point

Sample Point means a location approved by the City, from which wastewater can be collected that is representative in content and consistency of the entire flow of wastewater being sampled.
Sample 1Sample 2
Sample Point means a manhole, valve, tap or other similar control device or facility on equipment, a drain pipe or other similar location used for the sampling and monitoring of wastewater;
Sample 1Sample 2
Sample Point means a location approved by the Director or his designee from which Wastewater can be collected that is representative in content and consistency of the entire flow of Wastewater being discharged.
Sample 1

Related to Sample Point

  • Meet Point A point, designated by the Parties, at which one Party’s responsibility for service begins and the other Party’s responsibility ends.

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • DNA sample means any material that has come from a human body and consists of or includes human cells;

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • H-point means the pivot centre of the torso and thigh of the H-point machine when installed in a vehicle seat in accordance with Annex 3. Once determined in accordance with the procedure described in Annex 3, the "H" point is considered fixed in relation to the seat-cushion structure and is considered to move with it when the seat is adjusted in the X direction.

  • Delivery Point means the point(s) of connection(s) at which energy is delivered into the Grid System i.e. the Interconnection Point.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Supply Point means the point of connection between the licensed network and your apparatus or equipment.

  • COGS means the cost of goods sold as determined in accordance with U.S.GAAP;

  • Flash point means the lowest temperature of a liquid at which its vapours form a flammable mixture with air;

  • Demarcation Point means the point where Qwest owned or controlled facilities cease, and CLEC, End User Customer, premises owner or landlord ownership or control of facilities begin. "Designed, Verified and Assigned Date" or "DVA" means the date on which implementation groups are to report that all documents and materials have been received and are complete.

  • Delivery Points means: (i) for natural gas transported by interstate pipelines, the city gate stations of your Utility, and (ii) for electricity, one or more points at which Company, as your agent, has arranged for the delivery of electricity to a third party (such as your Utility) for your account or at your premises.

  • Metering Point means, for meters that do not use instrument transformers, the point at which the billing meter is connected. For meters that use instrument transformers, the point at which the instrument transformers are connected.

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • Receipt Point means the receipt/inception point(s) where Crude Oil is received into the Gathering System, as such points are specified in Section II of this tariff.

  • Product Group or “the Group” means a group of lotteries that has joined together to offer a product pursuant to the terms of the Multi-State Lottery Agreement and the Product Group’s own rules.

  • CO2 means carbon dioxide.

  • Meet-Point Billing (MPB) refers to the billing associated with interconnection of facilities between two or more LECs for the routing of traffic to and from an IXC with which one of the LECs does not have a direct connection. In a multi-bill environment, each Party bills the appropriate tariffed rate for its portion of a jointly provided Switched Exchange Access Service.

  • Meet-Point Billing (MPB means the billing associated with interconnection of facilities between two (2) or more LECs for the routing of traffic to and from an IXC with which one of the LECs does not have a direct connection. In a multi-bill environment, each Party bills the appropriate tariffed rate for its portion of a jointly provided Switched Exchange Access Service.

  • Sampler means a person who is employed by or is an owner of a licensed laboratory, grower, or processor and is authorized by that employer to collect samples in accordance with the testing laboratory's standard operating procedures and these Rules.

  • Focal point means the entity of a Party referred to in Article 5 responsible for receiving and submitting information as provided for in Articles 13 and 16;

  • Samples mean representative physical examples of materials, equipment or workmanship, used to confirm compliance with requirements and/or to establish standards for use in execution of the Work.

  • Harvest batch means a specifically identified quantity of dried flower or trim, leaves, and other cannabis plant matter that is uniform in strain, harvested at the same time, and, if applicable, cultivated using the same pesticides and other agricultural chemicals, and harvested at the same time.

  • Sample means urine, blood, breath, saliva, or hair.

  • Entry Point means a point just downstream of the final treatment operation, but upstream of the first user and upstream of any mixing with other water. If raw water is used without treatment, the “entry point” is the raw water source. If a PWS receives treated water from another PWS, the “entry point” is a point just downstream of the other PWS, but upstream of the first user on the receiving PWS, and upstream of any mixing with other water.

  • NGLs means natural gas liquids.