Setback distance definition

Setback distance means the distance measured by a straight horizontal line between the on-site liquid waste system, or portion thereof, and the object being considered;
Sample 1Sample 2Sample 3
Setback distance means the distance measured by a straight horizontal line between the on-site liquid waste system, its designated replacement area, or portion thereof, and the object being considered;
Sample 1Sample 2Sample 3
Setback distance means from the outer right-of-way line of a public road or highway up to a distance of 25 feet.
Sample 1Sample 2Sample 3

Examples of Setback distance in a sentence

  • Setback distance of trees in different situations shall be as per IRC: SP: 21 and IRC: 66.

  • Setback distance is measured from the Ordinary High Water Mark of all Water Resources, including when the Water Resource is located off the parcel but within the setback distance.

  • Setback distance shall be measured in a straight line as the shortest distance between the Marijuana Establishment building and property line.

  • Setback distance, as specified in this Lease, from the face of the Building's exterior to the protected/defended perimeter (i.e., any potential point of explosion).

  • Setback distance between different buildings on project site is reduced to the minimum allowed under jurisdiction code.

  • Setback distance of trees in different situations shall be based on IRC: SP: 21 and IRC: 66.

  • Setback distance between different buildings on project site is minimized.

  • Setback distance between project and existing or planned adjacent uses is minimized or non- existent.

  • Setback distance between project and adjacent uses is reduced to the minimum allowed under jurisdiction code.

  • Setback distance: The distance from the center of the wind turbine electrical generator tower foundation to the nearest property line, edge of a public road right-of-way or railroad right-of-way, third-party transmission line, above-ground pipeline, communication tower, other structure or other boundary established by Navajo County.


More Definitions of Setback distance

Setback distance means the distance measured by a straight horizontal line between the
Sample 1
Setback distance means the minimum distance required between a structure and the front, side, or rear boundary line of the parcel of land on which the structure is located.
Sample 1
Setback distance means the horizontal distance measured at rightangles to the highway centerline between the right-of-way line and permanent fixtures such as gas pump islands, signs, display stands, buildings, etc. The setback distance should be adequate to provide designated parking on private property.
Sample 1
Setback distance means the minimum distance between the wetted perimeter of irrigation and the item or land use in question.
Sample 1
Setback distance means the horizontal distance from the property line and located at the minimum setback distance from the property line. means the minimum required
Sample 1
Setback distance means the horizontal distance from the property line of the lot to the building line of the structure.
Sample 1

Related to Setback distance

  • travel distance means the distance an occupant has to travel to reach an exit.

  • Electrical Distance means, for a Generation Capacity Resource geographically located outside the metered boundaries of the PJM Region, the measure of distance, based on impedance and in accordance with the PJM Manuals, from the Generation Capacity Resource to the PJM Region.

  • Setback means the minimum distance from a specified boundary that a structure or other feature must be located.

  • Modular building retailer means any person who purchases or acquires a modular building from a

  • Water Surface Elevation (WSE means the height, in relation to NAVD 1988, of floods of various magnitudes and frequencies in the floodplains of riverine areas.

  • Impact surface means an interior or exterior surface that is subject to damage by repeated sudden force such as certain parts of door frames.

  • Distance means the great circle distance between the aerodrome of departure and the aerodrome of arrival plus an additional fixed factor of 95 km; and

  • Planning area means a planning area or a development area or a local planning area or a regional development plan area, by whatever name called, or any other area specified as such by the appropriate Government or any competent authority and includes any area designated by the appropriate Government or the competent authority to be a planning area for future planned development, under the law relating to Town and Country Planning for the time being in force and as revised from time to time;

  • Water surface elevation means the height, in relation to the National Geodetic Vertical Datum (NGVD) of 1929, the North American Vertical Datum (NAVD) of 1988, or other datum, where specified, of floods of various magnitudes and frequencies in the floodplains of riverine areas.

  • Tandem parking means that two or more automobiles are parked on a driveway or in any other location on a lot, lined up behind one another.

  • Acre-foot means the amount of water necessary to cover one acre of land to the depth of one foot, or 325,851 U.S. gallons of water.

  • Taximeter means any device for calculating the fare to be charged in respect of any journey in a hackney carriage or private hire vehicle by reference to the distance travelled or time elapsed since the start of the journey, or a combination of both; and

  • width means, in relation to a lot,

  • Modular building means, but shall not be limited to, single and multifamily houses, apartment

  • Boundary means any lateral or street boundary of a site;

  • parking meter means an apparatus for use on or in the vicinity of a parking place for indicating, as respects a space provided at that parking place for the leaving of vehicles, whether the initial charge has been paid and whether the period for which payment was made by the initial charge has expired;

  • Peak tube potential means the maximum value of the potential difference across the x-ray tube during an exposure.

  • Building Energy Benchmarking means the process of measuring a building’s Energy use, tracking that use over time, and comparing performance to similar buildings.

  • Site area emergency means events may occur, are in progress, or have occurred that could lead to a significant release of radioactive material and that could require a response by off-site response organizations to protect persons off-site.

  • Running at Large means any dog while roaming, running or self-hunting off the property of its owner or custodian and not under its owner's or custodian's immediate control.

  • Network Area means the 50 mile radius around the local school campus the Named Insured is attending.

  • Health professional shortage area means that term as defined in section 332(a)(1) of subpart II of part C of title III of the public health service act, chapter 373, 90 Stat. 2270, 42 U.S.C. 254e.

  • Working voltage means the highest value of an electrical circuit voltage root-mean-square (rms), specified by the manufacturer, which may occur between any conductive parts in open circuit conditions or under normal operating conditions. If the electrical circuit is divided by galvanic isolation, the working voltage is defined for each divided circuit, respectively.

  • water meter means any apparatus for measuring or showing the volume of water supplied to, or of effluent discharged from any premises;

  • Pavement means any type of improved surface that is within the public right-of-way and that is paved or otherwise constructed with bituminous, concrete, aggregate, or gravel.

  • Transportation network company driver or “driver” means an