Speed hump definition

Speed hump means any raised area in the roadway pavement surface extending transversely across the travel way that is composed of asphalt or another paving material and is installed and designed for the purpose of slowing vehicular traffic.
Sample 1Sample 2
Speed hump means a raised section of asphalt or other construction material constructed on a roadway, with a dip and crown shape as viewed in cross section, on a base approximately 12 feet long, measured parallel to the curblines of the roadway, and with a height of not less than three inches nor more than four inches. Such “speed humps” shall be installed for the purpose of improving pedestrian and traffic safety.
Sample 1Sample 2
Speed hump means an asphalt hump, approximately 3.25 inches high and up to 12 feet in width, and running from edge of pavement to edge of pavement across a road unless extended further in areas with wide shoulders.
Sample 1

Examples of Speed hump in a sentence

  • Q1: In regard to Speed hump striping, there is not a pay item for the 4” and 12” flat lines that go around the speed humps.

  • Speed hump modificationThe permanent speed humps are planned to be constructed mid to late October 2018.

  • Speed hump projects typically extend between higher-order streets.

  • Discussion of Speed hump on East 90th Street between First and York..Susan Sherman, resident of East 90th Street between First and York Avenues, in 2015 asked NYC DOT to install a speed bump on her block, which provides access to the FDR Drive.

  • Speed hump construction would not require street closures for prolonged periods.

  • The construction of humps and the placement of signs and markings will conform to the current design standards as established by the Department of Public Works.APPENDIX APROJECT PRIORITIZATION CRITERIA Speed hump projects will be ranked according to the criteria established in this section.

  • Physical humps are therefore required.• Three vehicles have to date overturned on the internal roads• Speed hump design:◆ A new speed hump of about three metres long was proposed by MVD (an example was constructed on the access road to phase 4) which will be implemented during next year at slightly higher cost.◆ Impossible to design a speed hump so that a vehicle can comfortably pass over at 40 Km/hour.

  • The Toronto and East York Community Council had before it a report (April 11, 2005) from the Director, Transportation Services, South District, respecting Speed hump poll results - Kenwood Avenue, between St. Clair Avenue West and Vaughan Road (St. Paul’s, Ward 21), and recommending that this report be received for information.

  • Ilmenite and tourmaline inclusions within albite porphyroblasts define an early layering (S1) which is crenulated by two later foliations.

  • Speed hump installations affect residents and road users; traffic speeds, volumes and travel time; roadway safety, noise levels and emissions.


More Definitions of Speed hump

Speed hump means a geometric roadway design feature that provides a vertical deflection in the roadway. A speed hump is not a traffic control device, but rather a traffic calming feature that is a physical part of a roadway’s design characteristics.
Sample 1
Speed hump means a geometric roadway design feature that provides a vertical deflection in the roadway. Speed humps are not the only traffic calming measure available under this policy.
Sample 1
Speed hump means a gentle rise in the profile of the road that is used to regulate the speed of a vehicle.
Sample 1
Speed hump means any raised area of a street, composed of asphalt or another paving material, that (i) stretches across substantially the entire width of the street, (ii) is several inches high, and (iii) is installed and designed for the purpose of slowing vehicular traffic.
Sample 1
Speed hump means a geometric roadway design feature that provides a vertical deflection in the roadway.
Sample 1
Speed hump means a raised area in the pavement surface, usually from three to four
Sample 1

Related to Speed hump

  • Planned External Financed Generation Capacity Resource means a Planned External Generation Capacity Resource that, prior to August 7, 2015, has an effective agreement that is the equivalent of an Interconnection Service Agreement, has submitted to the Office of the Interconnection the appropriate certification attesting achievement of Financial Close, and has secured at least 50 percent of the MWs of firm transmission service required to qualify such resource under the deliverability requirements of the Reliability Assurance Agreement.

  • Planned Financed Generation Capacity Resource means a Planned Generation Capacity Resource that, prior to August 7, 2015, has an effective Interconnection Service Agreement and has submitted to the Office of the Interconnection the appropriate certification attesting achievement of Financial Close.

  • interval meter means a meter that measures and records electricity use on an hourly or sub-hourly basis;

  • Urban growth areas means those areas designated

  • Anadromous fish means any species of fish which ascends rivers or streams from the sea for breeding purposes (e.g. Alewife, Salmon, Shad).

  • Hard cider means the same as that term is defined in 26 U.S.C. Sec. 5041.

  • Slash means all debris created on the Work area by the precommercial thinning operation.

  • Motor-driven cycle means every motorcycle that has a gasoline engine that (i) displaces less than

  • Scalping means the situation where the Client opens too many positions in CFDs at the same time and closes them for less than five minutes or buying at Bid price and selling at Ask price, so as to gain the Bid/Ask difference.

  • water meter means any apparatus for measuring or showing the volume of water supplied to, or of effluent discharged from any premises;

  • Mid-Span Fiber Meet An Interconnection architecture whereby two carriers’ fiber transmission facilities meet at a mutually agreed upon point for the mutual exchange of traffic, subject to the trunking requirements and other terms and provisions of this Agreement. The “point” of Interconnection for purposes of 47 U.S.C §§251(c)(2) and 251(c)(3) remains on CenturyLink’s network and is limited to the Interconnection of facilities between the CenturyLink Serving Wire Center and the location of the CLEC switch or other equipment located within the area served by the CenturyLink Serving Wire Center. Minutes of Use: Shall be abbreviated as MOU. Multiple Exchange Carrier Access Billing (MECAB): The document prepared by the Billing Committee of the Ordering and Billing Forum (OBF), which functions under the auspices of the Carrier Liaison Committee (CLC) of the Alliance for Telecommunications Industry Solutions (ATIS). The currently effective version of the MECAB document, published by ATIS (0401004-00XX), contains the recommended guidelines for the billing of an Access Service provided by two or more LECs, or by one LEC in two or more states within a single LATA. National Emergency Number Association (NENA): A not-for-profit corporation established in 1982 to further the goal of “One Nation-One Number” for emergency calls. NENA is a networking source and promotes research, planning, and training. NENA strives to educate, set standards and provide certification programs, legislative representation and technical assistance for implementing and managing 911 systems.

  • Modular building retailer means any person who purchases or acquires a modular building from a

  • Yard Trimmings means grass clippings, leaves, wood chips from tree parts, and brush.

  • Team Leader means an employee who is in a set or team and who is generally responsible for the work executed by the employees comprising such set or team;

  • Summer means the calendar months of May through September.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Diameter at Breast Height (DBH) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • PNode has the meaning set forth in the CAISO Tariff.

  • Pilot or "Payment in Lieu of Tax" shall mean any payment made to the Agency or an affected tax jurisdiction equal to all or a portion of the real property taxes or other taxes which would have been levied by or on behalf of an affected tax jurisdiction with respect to a project but for tax exemption obtained by reason of the involvement of the Agency in such project, but such term shall not include Agency fees.

  • Banning Committee means a Committee constituted for the purpose of these guidelines by the competent authority. The members of this Committee shall not, at any stage, be connected with the tendering process under reference.

  • Modular building manufacturer means a person or corporation who owns or operates a

  • Targeted case management means services that assist a beneficiary to access needed 2 medical, educational, social, prevocational, vocational, rehabilitative, or other community services. The 3 service activities may include, but are not limited to, communication, coordination and referral;

  • Scaling as used herein, involves:

  • Attenuation block means a block or stack, having dimensions 20 centimeters by 20 centimeters by 3.8 centimeters, of type 1100 aluminum alloy or other materials having equivalent attenuation.

  • Cold Weather Alert means the notice that PJM provides to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for expected extreme cold weather conditions.

  • Circuit Breaker means a device, capable of making and breaking the circuit under all conditions, and unless otherwise specified, so designed as to break the current automatically under abnormal conditions;