Speed range definition

Speed range means the range of speed considered for road load determination which is between the maximum speed of the Worldwide Light- duty Test Cycle (WLTC) for the class of test vehicle and minimum speed selected by the manufacturer which shall not be greater than 20 km/h.
Speed range means the range of speed between the maximum speed of the WLTC cycle for the class of test vehicle plus 10 km/h and minimum reference speed of 15 km/h over which the coastdown test is conducted;
Speed range means the range of speed considered for road load determination which is between the maximum speed of the Worldwide Light- duty Test Cycle (WLTC) for the class of test vehicle and minimum speed

Examples of Speed range in a sentence

  • Speed range The system shall be active at least within the vehicle speed range between 20 km/h and 60 km/h and at all vehicle load conditions., unless deactivated as per paragraph 5.4.

  • Speed range The system shall be active at least within the vehicle speed range between 10 km/h and the maximum design speed of the vehicle and at all vehicle load conditions, unless deactivated as per paragraph 5.4.

  • Secondary wiring (One delta one star connected).● Speed range : 20 %- 110 % of base speed.● Constant torque operation: 20% to 100% of base speed.● Maximum speed : 110%.● Direction of operation : Bi directional operation.● Mounting : Horizontal foot mounting.● Class of Insulation : “F” but temp.

  • Speed range The system shall be active at least within the vehicle speed range between 10km/h up to the maximum design speed of the vehicle and 100 km/h for category M vehicle, 10 km/h and 90 km/h for category N vehicle and at all vehicle load conditions, unless deactivated as per paragraph 5.4.

  • Speed range The vehicle emission factors have been shown in Table 5.

  • Table 202.3.1 indicates the appropriate context classification, Target Speed range, and potential techniques that may be applicable to achieve the indicated Target Speed.

  • Speed range: The two transmission input speeds of 1200 rpm and 1600 rpm shall be tested.

  • Speed range The system shall be active at least within the vehicle speed range between 10 km/h and 60 km/h and at all vehicle load conditions, unless deactivated as per paragraph 5.4.

  • Reduction of Creep Speed range of Spinning pumps of POY Barmag machines (Software from alternate vendor Satyam Sales against OEM Barmag).

  • Speed range: The torque loss shall be measured for the following speed steps (speed of the input shaft): 600, 900, 1200, 1600, 2000, 2500, 3000, […] rpm up to the maximum speed per gear according to the specifications of the transmission or the last speed step before the defined maximum speed.

Related to Speed range

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • Diameter at breast height (dbh) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Points refers to Citi ThankYou Points or ThankYou Points earned on your Citi Corporate Card;

  • MAOP means the maximum allowable operating pressure of the Maui Pipeline or any part of it, as set out in Schedule 6.

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • Band means the Pokagon Band of Potawatomi Indians.

  • Exit Point means a border control post or any other place designated by a Member State where animals, falling within the scope of Regulation (EC) No 1/2005, leave the customs territory of the Union;

  • low voltage means the set of nominal voltage levels that are used for the distribution of electricity and whose upper limit is generally accepted to be an a.c. voltage of 1000V ( or a d.c. voltage of 1500 V). [SANS 1019]

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Point / “Pip” shall mean the numerical value of the last, or right-most, digit of a Quote.

  • Intermodal Rail Yard means a rail facility in which cargo is transferred from drayage truck to train or vice-versa.

  • Reid vapor pressure means the vapor pressure of crude oil or other volatile petroleum products at 100 degrees Fahrenheit as determined by the latest edition of ASTM D6377 (RVPE): Standard Test Method for Determination of Vapor Pressure of Crude Oil.

  • kWh means kilowatt-hour.

  • Cubic Metre means the volume of gas which occupies one cubic metre when such gas is at a temperature of 15 degrees Celsius, and at a pressure of 101.325 kilopascals absolute;

  • Pipeline means any pipe, pipes, or pipelines used for the intrastate transportation or transmission of any solid, liquid, or gaseous substance, except water.

  • Working voltage means the highest value of an electrical circuit voltage root-mean-square (rms), specified by the manufacturer, which may occur between any conductive parts in open circuit conditions or under normal operating conditions. If the electrical circuit is divided by galvanic isolation, the working voltage is defined for each divided circuit, respectively.

  • Meet-Point Billing (MPB means the billing associated with interconnection of facilities between two (2) or more LECs for the routing of traffic to and from an IXC with which one of the LECs does not have a direct connection. In a multi-bill environment, each Party bills the appropriate tariffed rate for its portion of a jointly provided Switched Exchange Access Service.

  • Runoff coefficient means the fraction of total rainfall that will appear at the conveyance as runoff.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Lateral means a pipe, chamber or other conveyance used to carry and distribute effluent.