Structural Calculations definition

Structural Calculations means detailed calculations showing sufficiency of the strength of every load bearing part of the proposed structures.
Sample 1Sample 2Sample 3
Structural Calculations means an analysis of loads, materials, etc., prepared and stamped by a state of Washington licensed professional structural engineer.
Sample 1

Examples of Structural Calculations in a sentence

  • Submitted as part of the Structural Calculations (Phase III and IV submittals).• Correspondence with the power company concerning new electrical services and/or modifications to existing circuits, existing loads, and fault currents- Submitted as part of the Lighting Design Analysis Report (Phase IV submittal).• Voltage drop calculations.

  • Submitted as part of the Structural Calculations (Phase III and IV submittals).• Structural calculations for the high mast pole foundations.

  • Plan set to include Existing Conditions, Demolition (including tree preservation), Grading and Drainage, Layout, Architectural and preliminary Construction Details, Revegetation Plan and Structural Calculations as required by the County.

  • The design analysis and calculations must be in accordance with the enclosed NAU Engineering Guideline 01/2016 Preparation of Structural Calculations.

  • For projects not requiring Entitlement, a separate CEQA document is required per section 15.28.080.B□ Estimated quantity of cut and fill□ Haul route if excess fill is to be placed on land within the City of Rocklin Erosion and sediment control plan (ESC plan) showing temporary drainage 2 sets Structural Calculations for Retaining walls and Sound walls (if applicable) 2 copies of soils report 2 copies Engineer’s cost estimate breakdown of improvements included on the plans with 10% contingency added.

  • Approval of Structural Calculations required for any retaining wall within 4m of an existing public highway and which at any point is 1.5m above or below the level of the existing ground at that point prior to commencement.

  • Structural Calculations & Site Specific ReportsSpecific and unique to your building.

  • Structural Calculations Package shall be submitted at the same time as the shop drawings for this Work.

  • ISO 50001ASHRAE/IESNA Standard 90.1-2012IEC and IEEC Codes ASHRAE Standard 90.2ASHRAE Standard 62.1-2010 Model Energy Code ASHRAE Standard 135-2008ASHRAE Standard 189.1-2009 REF: Mehta and Thumann, Handbook of Energy Engineering, Chapter 1.

  • Engineer’s Structural Calculations – Provide to justify proposed framing members and beam sizes, footing sizes and reinforcement, lateral resisting system and connections.

Related to Structural Calculations

  • Structural as herein used shall mean any portion of the Leased Premises, Building or Common Areas of the Complex which provides bearing support to any other integral member of the Leased Premises, Building or Common Areas of the Complex such as, by limitation, the roof structure (trusses, joists, beams), posts, load bearing walls, foundations, girders, floor joists, footings, and other load bearing members constructed by Landlord.

  • Structural component means a component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Structural Engineer means the Engineer appointed or to be appointed from time to time by Promoter for the preparation of the structural design and drawings of the buildings .

  • Architectural coating means a coating applied to stationary structures and their appurtenances, to mobile homes, to pavements, or to curbs.

  • Structural Alterations means any Alterations involving the structural, mechanical, electrical, plumbing, fire/life safety or heating, ventilating and air conditioning systems of the Building.

  • Structural pest control means a use requiring a license under Chapter 14 (commencing with Section 8500), Division 3, of the Business and Professions Code.

  • Punch List Items means such items (i) as are reasonably necessary or appropriate to fully complete the construction, equipping and furnishing of the Hotel in accordance with this Contract and (ii) that, unless otherwise agreed by Buyer in its sole discretion, (a) individually and in the aggregate do not and will not prohibit, cause a delay in or otherwise adversely affect, under applicable Legal Requirements, the Franchise Agreement or otherwise, the opening of the Hotel for business to the public or the continued occupancy and operation of the Hotel as contemplated under the Brand and (b) may be corrected or completed, subject to delays caused by Force Majeure, within not more than sixty (60) days.

  • Punchlist Items means any items necessary at the time of the issuance of a temporary certificate of occupancy to complete fully the renovation of the Project Facilities in accordance with the Plans and Specifications for the Project Facilities, or required for the issuance of a final certificate of occupancy or its equivalent.

  • Material Project EBITDA Adjustments means, with respect to each Material Project:

  • Structural Term Sheets shall have the respective meanings assigned to them in the February 13, 1995 letter of Cleary, Gottlieb, Xxxxx & Xxxxxxxx on behalf of the Public Securities Association (which letter, and the SEC staff's response thereto, were publicly available February 17, 1995). The term "Collateral Term Sheet" as used herein includes any subsequent Collateral Term Sheet that reflects a substantive change in the information presented. "Computational Materials" has the meaning assigned to it in the May 17, 1994 letter of Xxxxx & Wood on behalf of Xxxxxx, Xxxxxxx & Co., Inc. (which letter, and the SEC staff's response thereto, were publicly available May 20, 1994). "Series Term Sheet" has the meaning assigned to it in the April 4, 1996 letter of Xxxxxx & Xxxxxxx on behalf of Greenwood Trust Company (which letter, and the SEC staff's response thereto, were publicly available April 5, 1996).

  • Structural alteration means an Alteration that (i) will result in a change in the footprint of the Improvements, (ii) involves the addition of one or more floors to the Improvements, (iii) affects the structural elements or any exterior walls of the Improvements, (iv) decreases the rentable square footage of the Leased Premises other than to a de minimis extent or (v) adversely affects the proper functioning and/or capacity of the building systems in the Improvements.

  • Construction Schedule means a construction schedule indicating the planned start and completion dates of the major activities of the Work as set out in Appendix [ ], a future Appendix;

  • CMSA Operating Statement Analysis Report means a report substantially in the form of, and containing the information called for in, the downloadable form of the "Operating Statement Analysis Report" available as of the Closing Date on the CMSA Website or in such other form for the presentation of such information and containing such additional information as may from time to time be approved by the CMSA for commercial mortgage-backed securities transactions generally.

  • Operating Statement Analysis Report format substantially in the form of and containing the information called for therein for the Mortgage Loans, or such other form for the presentation of such information as may be approved from time to time by the CREFC® for commercial mortgage securities transactions generally.

  • Erection, construction, remodeling, repairing means all types of work done on a particular building or work at the site thereof in the construction or development of the project, including without limitation, erecting, construction, remodeling, repairing, altering, painting, and decorating, the transporting of materials and supplies to or from the building or work done by the employees of the Contractor, Subcontractor, or Agent thereof, and the manufacturing or furnishing of

  • Engineering means the application of scientific knowledge for the design, control, or use of building structures, equipment, or apparatus.

  • Corrective Measure means a measure as defined in Article 3, point 16, of Regulation (EU) 2019/1020;

  • Engineering Reports has the meaning assigned such term in Section 2.07(c)(i).

  • Changes/Extra Work The SUBRECIPIENT shall make no changes to this CONTRACT without the COUNTY’s written consent. In the event that there are new or unforeseen requirements, the COUNTY with the SUBRECIPIENT’s concurrence has the discretion to request official changes at any time without changing the intent of this CONTRACT.

  • Implementation Schedule means the Implementation Schedule in Section VII of the tendering documents.

  • Baseline Schedule means the initial time schedule prepared by Contractor for Owner’s information and acceptance that conveys Contractor’s and Subcontractors’ activities (including coordination and review activities required in the Contract Documents to be performed by A/E and ODR), durations, and sequence of work related to the entire Project to the extent required by the Contract Documents. The schedule clearly demonstrates the critical path of activities, durations and necessary predecessor conditions that drive the end date of the schedule. The Baseline Schedule shall not exceed the time limit current under the Contract Documents.

  • CREFC® Operating Statement Analysis Report The monthly report in the “Operating Statement Analysis Report” format substantially in the form of and containing the information called for therein for the Mortgage Loans, or such other form for the presentation of such information as may be approved from time to time by the CREFC® for commercial mortgage securities transactions generally.

  • Project Schedule means a document that, with respect to each Phase of the Project, identifies, coordinates and integrates the anticipated design and construction schedules, the Contracting Authority’s and Owner's responsibilities, government authority reviews and other activities as are necessary for the timely completion of the Work.

  • Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;

  • Structural Term Sheet shall have the respective meanings assigned to them in the February 13, 1995 letter (the "PSA Letter") of Cleary, Gottlieb, Steex & Xamixxxx xx behalf of the Public Securities Association (which letter, and the SEC staff's response thereto, were publicly available February 17, 1995). The term "Collateral term sheet" as used herein includes any subsequent Collateral term sheet that reflects a substantive change in the information presented. The term "Computational Materials" has the meaning assigned to it in the May 17, 1994 letter (the "Kiddxx xxxter" and together with the PSA Letter, the "No-Action Letters") of Browx & Xood xx behalf of Kiddxx, Xxabody & Co., Inc. (which letter, and the SEC staff's response thereto, were publicly available May 20, 1994).