Structural Provisions definition

Structural Provisions for a specific installation means that primary structure is structurally adequate for installation. The brackets, bolt holes, wiring and fluid lines are not supplied or included as items in the normal weight of the aircraft.
Sample 1

Examples of Structural Provisions in a sentence

  • A qualified practising certified structural engineer must provide structural certification to Council (where Council is the Certifying Authority) verifying that the existing structure can adequately support the proposed new loads and the structural design complies with the Structural Provisions of Part B1 (Vol 1) and Part 2.1 (Vol 2) of the Building Code of Australia prior to a Construction Certificate being issued.

  • A qualified practising certified structural engineer must provide structural certification to Council (where Council is the Principal Certifier) verifying that the existing structure can adequately support the proposed new loads and the structural design complies with the Structural Provisions of Part B1 (Vol 1) and Part 2.1 (Vol 2) of the Building Code of Australia prior to a Construction Certificate being issued.

  • A qualified practising registered structural engineer must provide structural certification to Council (where Council is the Accredited Certifier) verifying that the existing structure can adequately support the proposed new loads and the structural design complies with the Structural Provisions of Part B1 (Vol 1) and Part 2.1 (Vol 2) of the Building Code of Australia prior to a Construction Certificate being issued.

  • Regulations 31.1 to 31.3 Regulations 31.1 to 31.3 are contained in Part 31 (Excavation, Earthwork and Retaining Walls) of Group VI (Structural Provisions) of the Victoria Building Regulations and provide as follows: Excavations and Backfilling: Safety 31.1 All excavations and backfilling shall be executed in a safe and workmanlike manner.

  • Michael Dorf, Standing, Substantive Rights, and Structural Provisions in the Challenge to Travel Ban 2.0, DORF ON LAW (Mar.

  • This paper explores Structural Provisions (NCC Part B1) applicable specifically to the seismic restraint of building services, and the design of non-loadbearing walls, and the challenges for holistic integration with other NCC Performance Requirements.

  • A qualified practising certified structural engineer must provide structural certification to Council (where Council is the Principal Certifier) verifying that the existing structure can adequately support the proposed basement and new loads and the structural design complies with the Structural Provisions of Part B1 (Vol 1) and Part 2.1 (Vol 2) of the Building Code of Australia prior to a Construction Certificate being issued.

  • Michael Dorf, Standing, Substantive Rights, and Structural Provisions in the Challenge to Muslim Ban 2.0, DORF ON LAW (Mar.

  • Regulation 31 Regulation 31 is contained in Part 31 (Excavation, Earthwork and Retaining Walls) of Group VI (Structural Provisions) of the Regulations and provides as follows : Excavations and backfilling: safety31.1 All excavations and backfilling shall be executed in a safe and workmanlike manner, and all excavations shall be properly guarded and protected to prevent them from being dangerous to life and property by way of approved shoring, compaction, drainage or other means.

  • QoQ, Structural Provisions grew mainly in BCP Individual, which led the structural CoR to rise 35bps.

Related to Structural Provisions

  • General Provisions means those portions of the Subscription Agreement headed “General Provisions” and contained on pages 7 to 12;

  • Supplemental Provisions means these Supplemental Provisions for Federally Funded Contracts, Grants, and Purchase Orders subject to the Federal Funding Accountability and Transparency Act of 2006, As Amended, as may be revised pursuant to ongoing guidance from the relevant Federal or State of Colorado agency or institution of higher education.

  • Additional Provisions shall have the meaning set forth in Section 15.01.

  • Structural Term Sheet shall have the respective meanings assigned to them in the February 13, 1995 letter (the "PSA Letter") of Cleary, Gottlieb, Steex & Xamixxxx xx behalf of the Public Securities Association (which letter, and the SEC staff's response thereto, were publicly available February 17, 1995). The term "Collateral term sheet" as used herein includes any subsequent Collateral term sheet that reflects a substantive change in the information presented. The term "Computational Materials" has the meaning assigned to it in the May 17, 1994 letter (the "Kiddxx xxxter" and together with the PSA Letter, the "No-Action Letters") of Browx & Xood xx behalf of Kiddxx, Xxabody & Co., Inc. (which letter, and the SEC staff's response thereto, were publicly available May 20, 1994).

  • Special Provisions Special Provisions are specific conditions or requirements peculiar to the contract under consideration and are supplemental to the General Provisions. Should the Special Provisions conflict with the General Provisions, the Special Provisions shall prevail.

  • Other Definitional Provisions set forth in Section 1.2 of the Basic Servicing Agreement are incorporated by reference into this 2017-3 Servicing Supplement.

  • Structural Term Sheets shall have the respective meanings assigned to them in the February 13, 1995 letter of Cleary, Gottlieb, Xxxxx & Xxxxxxxx on behalf of the Public Securities Association (which letter, and the SEC staff's response thereto, were publicly available February 17, 1995). The term "Collateral Term Sheet" as used herein includes any subsequent Collateral Term Sheet that reflects a substantive change in the information presented. "Computational Materials" has the meaning assigned to it in the May 17, 1994 letter of Xxxxx & Wood on behalf of Xxxxxx, Xxxxxxx & Co., Inc. (which letter, and the SEC staff's response thereto, were publicly available May 20, 1994). "Series Term Sheet" has the meaning assigned to it in the April 4, 1996 letter of Xxxxxx & Xxxxxxx on behalf of Greenwood Trust Company (which letter, and the SEC staff's response thereto, were publicly available April 5, 1996).

  • substantive provisions , in relation to an old Act, means the provisions of the old Act other than those dealing with matters dealt with in the Taxation Administration Act 2003.

  • Exceptions and Limitations means fair use, fair dealing, and/or any other exception or limitation to Copyright and Similar Rights that applies to Your use of the Licensed Material.

  • Structural Alterations means any Alterations involving the structural, mechanical, electrical, plumbing, fire/life safety or heating, ventilating and air conditioning systems of the Building.

  • Standard Terms and Conditions or “Standard Terms” means these terms and conditions for the grant of the Loan to the Borrower by ABFL.

  • Structural as herein used shall mean any portion of the Leased Premises, Building or Common Areas of the Complex which provides bearing support to any other integral member of the Leased Premises, Building or Common Areas of the Complex such as, by limitation, the roof structure (trusses, joists, beams), posts, load bearing walls, foundations, girders, floor joists, footings, and other load bearing members constructed by Landlord.

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Structural pest control means a use requiring a license under Chapter 14 (commencing with Section 8500), Division 3, of the Business and Professions Code.

  • Structural damage means a covered building, regardless of the date of its construction, has experienced the following.

  • Terms & Conditions means the Special Conditions of Contract and General Conditions of Contract herein mentioned and other stipulations incorporated in any part of Tender Document and /or Agreement.

  • Limitation of Liability PrimePay has negotiated preferred terms and conditions with FD as a service to PrimePay Clients. Client understands that FD, and not PrimePay, will be performing those services and that Client will enter its own service agreement(s) with FD for such services under terms and conditions specified by FD and agreed to by Client. Accordingly, Client acknowledges that FD shall be the provider of Payment Processing Services hereunder and that PrimePay shall have no liability whatsoever for or related to the performance of those services, including any and all damages, costs and related expenses (including attorney fees).

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • Specific Terms and Conditions means the specific terms and conditions as described in Section 6.1 (and, in relation to an Agreement between AGN and a Network User, means the Specific Terms and Conditions which form part of that Agreement).

  • General Conditions means the “International Development Association General Conditions for Credits and Grants”, dated July 1, 2005 (as amended through October 15, 2006).

  • Structural component means a component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).

  • General Terms and Conditions means the General Terms and Conditions for Services Contracts as referenced on the RFP cover page.

  • Arrangement Provisions means Part 9, Division 5 of the BCBCA;

  • Construction and demolition waste means waste from building materials, debris and rubble resulting from construction, remodeling, repair and demolition operations;

  • Communications Provisions means the Communications Provisions in [Part 10, Chapter 4] of the General Regulations.

  • General Conditions Cost means costs incurred and minor work performed by Contractor without the need for competitive bids/proposals. The allowable General Conditions items are limited in Paragraph 11.1 and are further described on Exhibit “D”. The maximum allowable General Conditions Cost payable to Contractor during the Construction Phase of the Project is set out in Exhibit “A” attached to this Agreement.