Tack Coat definition
Examples of Tack Coat in a sentence
The test will be according to the “Determination of Residual Asphalt in Prime and Tack Coat Materials” test procedure.
If the aggregate fails to meet the specified gradation, the Engineer will apply a price reduction as specified in Section 302.06 B, “Contract Price Adjustments”.401.03 B Tack Coat and Fog Seal.
Tack Coat Application: The tack coat shall be applied by a pressurized spray system that results in uniform overlapping coverage at an application rate of 0.03 to 0.05 gallons per square yard for a non-milled surface and an application rate of 0.05 to 0.07 gallons per square yard for a milled surface.
The test will be according to the "Determination of Residual Asphalt in Prime and Tack Coat Materials" test procedure.
Tack coat meeting the requirements of Materials Designation 702-XXXXT Asphalt Emulsion Diluted Tack Coat shall be used to adhere the rumble strip to the existing pavement.
Do not place the material on frozen subgrade.234-7.1.2 Tack Coat: Unless otherwise authorized by the Engineer, apply a tack coat between successive layers of base material.234-7.1.3 Thickness of Layers: Construct each course in layers not to exceed 3 inches compacted thickness.
When the same storage facility is utilized for Bituminous Materials to be used in Hot Mix Asphaltic Concrete, Bituminous Tack Coat, and/or Surface Treatment, the quantity used for Tack Coat shall be converted to tons (megagrams) and deducted from the quantities for the Bituminous Material used in the Hot Mix Asphaltic Concrete and Surface Treatment.
Obtain a receipt for all material received from JCP&L, maintain a documented inventory of materials used and obtain a receipt for all material returned to JCP&L.Provide materials as specified: Tack Coat 64-22, PG 64S-22 902.01.01 Hot Mix Asphalt (HMA) 902.02 Concrete 903.03 Controlled Low Strength Material (CLSM) 903.09 Curing Materials 903.10 Joint Sealer, Hot-Poured 914.02 Polymerized Joint Adhesive 914.0365X.03 Construction65X.03.01 ElectricA.
Tack Coat shall be considered incidental to HMA, and will not be measured separately.
Tack Coat: Apply uniformly to vertical surfaces abutting or projecting into new, hot-mix asphalt paving at a rate of 0.05 to 0.15 gal./sq.