Technical Certification definition

Technical Certification means a certification approved by the Miami-Dade County Technical Certification Committee which establishes minimum qualifications of the firm to perform the specific services to be eligible to submit proposals on, and receive award of, County agreements for architectural, engineering, landscape architecture, or surveying and mapping services. Firms may be certified in several different technical certification categories.
Technical Certification means a certification approved by the Miami- Dade County Technical Certification Committee to be eligible a firm to submit proposals on, and receive award of, County agreements for architectural, engineering, landscape architecture, or surveying and mapping services. Firms may be certified in several different technical certification categories.
Technical Certification means the minimum requirements and standards set forth on the Bentley Reseller Website or such other medium selected by Bentley in which an employee of Reseller must meet and maintain in order for Reseller to provide support services to Subscriber Sites for which Reseller is the Assigned Support Provider. The term "ASSIGNED SUPPORT PROVIDER" shall mean, with respect to any Subscriber Site, the reseller, if any, that has been authorized by Bentley to provide support services under the Bentley SELECT Program to such Subscriber Site. Bentley shall have the right to revoke Reseller's designation as the Assigned Support Provider for any Subscriber Site at any time upon notice to Reseller. As the Assigned Support Provider for any Subscriber Site, Reseller will perform the duties and services designated by Bentley from time to time including, without limitation, providing first line support to such Subscriber Sites, and, after the Notification Date (as defined in Exhibit E), using Bentley's Siebel customer relationship management software system for all contacts with such Subscriber Sites.

Examples of Technical Certification in a sentence

  • Construction, dewatering, and removal of temporary cofferdams shall not violate Technical Certification Condition 5 of this Certification.

  • However, if vendors have any exceptions and/or assumptions to any of the terms and conditions in this section, they MUST identify in detail their exceptions and/or assumptions on Attachment B, Technical Certification of Compliance.

  • The Applicant shall perform surface water sampling in accordance with Technical Certification Condition No. 4, if any of the following conditions occur: 1) in-water work is conducted during an unanticipated flow event; 2) Project activities result in any materials reaching surface waters; or 3) Project activities result in the creation of a visible plume in surface waters.

  • Yes No Any exceptions and/or assumptions to the insurance requirements must be identified on Attachment B, Technical Certification of Compliance with Terms and Conditions of RFQ.

  • Whenever the NYC Construction Codes or the Rules of the Department of Buildings requires that material be listed or labeled and material proposed to be used is not so listed or labeled, the use of such material shall be subject to prior approval by the Commissioner (Office of Technical Certification and Research OTCR) and such material shall be used only to the extent set forth in such approval.

  • If exceptions and/or assumptions require a change to the Insurance Schedule, vendors must provide the specific language that is being proposed on Attachment B, Technical Certification of Compliance with Terms and Conditions of RFQ.

  • If exceptions and/or assumptions require a change to the Contract Form, vendors must provide the specific language that is being proposed on Attachment B, Technical Certification of Compliance with Terms and Conditions of RFQ.

  • For non-project specific questions regarding Miami-Dade County's A/E Technical Certification and Certification Committee meeting dates, please contact Nubia Jarquin, ISD, at (305) 375-5637.

  • A letter requesting pipe welder qualifying agency approval and attesting to compliance with this section, signed by the owner of the agency, accompanied by any related fees set forth in the rules of the department, shall be mailed to the Department of Buildings, 280 Broadway, 7th Floor, New York, NY, 10007, Attn: The Office of Technical Certification and Research (“OTCR”).

  • Replace Section 430.04 A “Contractor Quality Control (QC) with the following: Provide personnel meeting the requirements of NDDOT Technical Certification Program for the following tests:− ND T 2 – Sampling of Aggregates; and− NDDOT 5 Sampling and Splitting Field Verification of Hot Mix Asphalt (HMA) Samples.

Related to Technical Certification

  • Medical certification means a statement which attests that the medical information reported on the certificate of death or fetal death is accurate to the best of the medical certifier’s knowledge.

  • Final Certification As defined in Section 2.02(a) hereof.

  • Initial Certification As defined in Section 2.02(a) hereof.

  • CEC Certification and Verification means that the CEC has certified (or, with respect to periods before the Project has commenced commercial operation (as such term is defined by and according to the CEC), that the CEC has pre-certified) that the Project is an ERR for purposes of the California Renewables Portfolio Standard and that all Energy produced by the Project qualifies as generation from an ERR for purposes of the Project.

  • certification mark means a mark used in connection with the goods or services of a person other than the certifier to indicate geographic origin, material, mode of manufacture, quality, accuracy, or other characteristics of the goods or services or to indicate that the work or labor on the goods or services was performed by members of a union or other organization.

  • Federal Certifications means the “Certification Regarding Lobbying – Compliant with Appendix A to 24 C.F.R. Part 87” and Standard Form LLL, “Disclosure of Lobbying Activities,” also in Attachment B, attached hereto and incorporated herein for all purposes.

  • medical certificate means a certificate signed by a registered medical practitioner.

  • Interim Certification As defined in Section 2.02.

  • Sarbanes Certification has the meaning set forth in Section 9.21(b)(iii) of the Sale and Servicing Agreement.

  • Back-Up Certification As defined in Section 3.18(k).

  • Physical Certificate As specified in the Preliminary Statement.

  • Affidavit of Small Business Enterprise Certification means the fully completed, signed, and notarized affidavit that must be submitted with an application for SBE certification. Representations and certifications made by the applicant in this Affidavit are made under penalty of perjury and will be used and relied upon by City to verify SBE eligibility and compliance with SBE certification and documentation requirements.

  • Master Servicer Certification A written certification covering servicing of the Mortgage Loans by all Servicers and signed by an officer of the Master Servicer that complies with (i) the Xxxxxxxx-Xxxxx Act of 2002, as amended from time to time, and (ii) the February 21, 2003 Statement by the Staff of the Division of Corporation Finance of the Securities and Exchange Commission Regarding Compliance by Asset-Backed Issuers with Exchange Act Rules 13a-14 and 15d-14, as in effect from time to time; provided that if, after the Closing Date (a) the Xxxxxxxx-Xxxxx Act of 2002 is amended, (b) the Statement referred to in clause (ii) is modified or superceded by any subsequent statement, rule or regulation of the Securities and Exchange Commission or any statement of a division thereof, or (c) any future releases, rules and regulations are published by the Securities and Exchange Commission from time to time pursuant to the Xxxxxxxx-Xxxxx Act of 2002, which in any such case affects the form or substance of the required certification and results in the required certification being, in the reasonable judgment of the Master Servicer, materially more onerous than the form of the required certification as of the Closing Date, the Master Servicer Certification shall be as agreed to by the Master Servicer, the Depositor and the Seller following a negotiation in good faith to determine how to comply with any such new requirements.

  • medical certificate of fitness means a certificate valid for one year issued by an occupational health practitioner, issued in terms of these regulations, whom shall be registered with the Health Professions Council of South Africa;

  • Recertification means the process by which a client’s eligibility to continue to receive child care assistance benefits are determined.

  • Income Certification means a Tenant Income Certification and a Tenant Income Certification Questionnaire in the form attached as Exhibit B hereto or in such other comparable form as may be provided by the Issuer to the Owner, or as otherwise approved by the Issuer.

  • Delay Delivery Certification As defined in Section 2.02(a) hereof.

  • Investor Certification A certificate representing that such Person executing the certificate is a Certificateholder, a Certificate Owner or a prospective purchaser of a Certificate (or any investment advisor or manager of the foregoing), the Controlling Class Representative (to the extent the Controlling Class Representative is not a Certificateholder or a Certificate Owner), a Risk Retention Consultation Party (to the extent such Risk Retention Consultation Party is not a Certificateholder or Certificate Owner) or a Serviced Companion Loan Holder or its Companion Loan Holder Representative, and that (i) for purposes of obtaining certain information and notices (including access to information and notices on the Certificate Administrator’s Website) pursuant to this Agreement, (A) (1) in the case of a Person that is neither the Controlling Class Representative nor a Controlling Class Certificateholder, such Person is or is not a Borrower Party and such Person is or is not a Risk Retention Consultation Party or (2) in the case of the Controlling Class Representative or a Controlling Class Certificateholder, such Person is or is not a Borrower Party as to any identified Excluded Controlling Class Mortgage Loan, and (B) except in the case of a Serviced Companion Loan Holder or its Companion Loan Holder Representative, such Person has received a copy of the Prospectus, which certificate shall be substantially in the form of Exhibit X-0X, Xxxxxxx X-0X, Xxxxxxx X-0X, Exhibit M-1D or Exhibit M-1E to this Agreement or in the form of an electronic certification contained on the Certificate Administrator’s Website, and/or (ii) for purposes of exercising Voting Rights (which does not apply to a prospective purchaser of a Certificate, a Serviced Companion Loan Holder or its Companion Loan Holder Representative), (A) (1) such Person is not a Borrower Party or (2) in the case of the Controlling Class Representative or any Controlling Class Certificateholder, such Person is a Borrower Party as to any identified Excluded Controlling Class Mortgage Loan, (B) such Person is or is not the Depositor, the Master Servicer, the Special Servicer, an Excluded Mortgage Loan Special Servicer, the Trustee, the Certificate Administrator, the Operating Advisor, the Asset Representations Reviewer, a Mortgage Loan Seller or an Affiliate of any of the foregoing and (C) such Person has received a copy of the Prospectus, which certificate shall be substantially in the form of Exhibit M-2A or Exhibit M-2B to this Agreement or in the form of an electronic certification (which may be a click-through confirmation) contained on the Certificate Administrator’s Website or the Master Servicer’s website. The Certificate Administrator may require that Investor Certifications are resubmitted from time to time in accordance with its policies and procedures. For the avoidance of doubt if a Borrower Party is the Controlling Class Representative or a Controlling Class Certificateholder, such Person (A) shall be prohibited from having access to the Excluded Information solely with respect to the related Excluded Controlling Class Mortgage Loan and (B) shall not be permitted to exercise voting or control, consultation and/or special servicer appointment rights as a member of the Controlling Class solely with respect to the related Excluded Controlling Class Mortgage Loan.

  • certification body means a body, including product or quality systems certification bodies, that may be designated by one Party in accordance with this Part to conduct certification on compliance with the other Party's standards and/or specifications to meet relevant mandatory requirements;

  • Provisional certificate means the provisional certificate described in§ 900.11(b)(2).

  • Citizenship Certification means a properly completed certificate in such form as may be specified by the General Partner by which an Assignee or a Limited Partner certifies that he (and if he is a nominee holding for the account of another Person, that to the best of his knowledge such other Person) is an Eligible Citizen.

  • type-approval certificate means the document whereby the approval authority officially certifies that a type of vehicle, system, component or separate technical unit is approved;

  • Actuarial certification means a written statement by a member of the American Academy of

  • Professional Engineer or Professional Certificated Engineer means a person holding registration as either a Professional Engineer or Professional Certificated Engineer in terms of the Engineering Profession Act, 2000 (Act No. 46 of 2000);

  • Certification Regarding Venue" Terms with TIPS Members Vendor agrees that if any "Venue" provision is included in any sales agreement/contract between Vendor and a TIPS Member, that clause must provide that the "Venue" for any litigation or alternative dispute resolution is shall be in the state and county where the TIPS Member operates unless the TIPS Member expressly agrees otherwise. Any TIPS Sale Supplemental Agreement containing a "Venue" clause that conflicts with these terms is rendered void and unenforceable. If Vendor disagrees, after this solicitation legally closes and TIPS begins evaluating Vendor's file, TIPS will provide Vendor with a draft Word Document version of the Vendor Agreement and will be instructed to include all requested negotiations as redline edits for TIPS consideration. Does Vendor agree? Yes Certification Regarding "Automatic Renewal" Terms with TIPS Members Vendor agrees that no TIPS Sale may incorporate an "Automatic Renewal" clause that exceeds month to month terms with which the TIPS Member must comply. All renewal terms incorporated into a TIPS Sale Supplemental Agreement shall only be valid and enforceable when Vendor received written confirmation of acceptance of the renewal term from the TIPS Member for the specific renewal term. The purpose of this clause is to avoid a TIPS Member inadvertently renewing a Supplemental Agreement during a period in which the governing body of the TIPS Member has not properly appropriated and budgeted the funds to satisfy the Agreement renewal. Any TIPS Sale Supplemental Agreement containing an "Automatic Renewal" clause that conflicts with these terms is rendered void and unenforceable. If Vendor disagrees, after this solicitation legally closes and TIPS begins evaluating Vendor's file, TIPS will provide Vendor with a draft Word Document version of the Vendor Agreement and will be instructed to include all requested negotiations as redline edits for TIPS consideration. Does Vendor agree? Yes Certification Regarding "Indemnity" Terms with TIPS Members Texas and other jurisdictions restrict the ability of governmental entities to indemnify others. Vendor agrees that if any "Indemnity" provision which requires the TIPS Member to indemnify Vendor is included in any sales agreement/contract between Vendor and a TIPS Member, that clause must either be stricken or qualified by including that such indemnity is only permitted, "to the extent permitted by the laws and constitution of [TIPS Member's State]" unless the TIPS Member expressly agrees otherwise. Any TIPS Sale Supplemental Agreement containing an "Indemnity" clause that conflicts with these terms is rendered void and unenforceable. If Vendor disagrees, after this solicitation legally closes and TIPS begins evaluating Vendor's file, TIPS will provide Vendor with a draft Word Document version of the Vendor Agreement and will be instructed to include all requested negotiations as redline edits for TIPS consideration. Does Vendor agree? Yes Certification Regarding "Arbitration" Terms with TIPS Members Vendor agrees that if any "Arbitration" provision is included in any TIPS Sale agreement/contract between Vendor and a TIPS Member, that clause may not require that the arbitration is mandatory or binding. Vendor agrees that if any "Arbitration" provision is included in any TIPS Sale agreement/contract between Vendor and a TIPS Member, that clause provides for only voluntary and non-binding arbitration unless the TIPS Member expressly agrees otherwise. Any TIPS Sale Supplemental Agreement containing a “Arbitration” clause that conflicts with these terms is rendered void and unenforceable. If Vendor disagrees, after this solicitation legally closes and TIPS begins evaluating Vendor's file, TIPS will provide Vendor with a draft Word Document version of the Vendor Agreement and will be instructed to include all requested negotiations as redline edits for TIPS consideration. Does Vendor agree? Yes