GENERAL WARNINGS. After the removing of the package check for the completeness of the delivery, in the case of defects, please contact the dealer who sold the boiler. • The boiler must be used solely for the purpose envisaged by the manufacturer. Any liability of the manufacturer is excluded for damages to persons, animals or things, in case of errors during installation, regulation, maintenance or improper use. • In case of leakage of water the device should be switched from the mains supply, close the water supply and inform the authorized service and authorized installers. • This manual is an integral part of the device and must be kept with care and must always follow the device even in case of change of owner or user, or in case of connection to another installation. In case of damage or failure look for a new copy of an authorized dealer.
GENERAL WARNINGS. The boiler must be set correctly for proper operation! Maximum operating pressure of the boiler is 3 bar, 1 bar the minimum and maximum operating temperature of the boiler is 110 C. Solid fuel boiler and forced draft should be installed according to valid standards and legal regulations. Any mechanical or electrical change in the design or installation shall be deemed a violation of guarantee conditions and will lead to its distortion. The boiler together with a fan and automation system and both devices, use the power supply of 230V, so that improper installation and careless handling can endanger human lives by electric shock. In an assembly the boiler should be properly protected against the excessive overpressure and overheating. For the proper installation the plumber/installer is responsible. The manufacturer (Radijator inzenjering) does not take any responsibility coming from the incorrect installation of the boiler.
GENERAL WARNINGS. The boiler must be set correctly for proper operation! Maximum operating pressure of the boiler is 3 bar, 1 bar the minimum and maximum operating temperature of the boiler is 110 C. Boiler with 2 fans, automation and ceramic heaters for wood and all of these devices use 230V power, so that incorrect installation and careless handling may endanger human life electrocution. Solid fuel boiler and forced draft should be installed according to valid standards and legal regulations. Any mechanical or electrical change in the design or installation shall be deemed a violation of guarantee conditions and will lead to its distortion. In an assembly the boiler should be properly protected against the excessive overpressure and overheating. When installing the hydraulic installation of the boiler must be provided in a prescribed way of overdraft maximum operating temperature and pressure. For the proper installation the plumber/installer is responsible. The manufacturer (Radijator inzenjering) does not take any responsibility coming from the incorrect installation of the boiler. When any intervention on the electrical devices BIOmax , the whole system off the main power supply.