and No ile bunların EK’lerinde yer alan belgelerden oluşmaktadır./and documents included in their ANNEXES.
and No. 2 Situated in the County of Bowie, State of Texas, and being Oil and Gas Properties, Xxxxx and Equipment described in Assignment and Xxxx of Sale from Rialto Energy, Inc. to Rockwall Marketing Corporation, effective June 1, 1995, recorded in Volume 2394, Page 25, Official Records, Bowie County, Texas, said Oil and Gas Properties being more fully described in Schedule II attached hereto and made a part hereof for all purposes. Situated in the County of Bowie, State of Texas, and being a part of the X. X. Xxxxxxx Survey, Abstract No. 263, and being Oil and Gas Properties, Xxxxx and Equipment described in Assignment, Xxxx of Sale and Conveyance from Stelaron, Inc. to Rockwall Marketing Corporation, effective September 1, 1996, recorded in Volume 2636, Page 31, Official Records, Bowie County, Texas, said Oil and Gas Properties being more fully described in Schedule II attached hereto and made a part hereof for all purposes. Situated in the County of Bowie, State of Texas, and being a part of the X. X. Xxxxxxx Survey, Abstract No. 263, and the E. T. Xxxxxxx Survey, Abstract No. 300, and being Oil and Gas Properties, Xxxxx and Equipment described in Assignment and Xxxx of Sale from Stratco Operating Co., Inc. to Rockwall Marketing Corporation, effective January 1, 1996, recorded in Volume 2495, Page 239, Official Records, Bowie County, Texas, said Oil and Gas Properties being more fully described in Schedule II attached hereto and made a part hereof for all purposes. Situated in the County of Bowie, State of Texas, and being a part of the X. X. Xxxxxxx Survey, Abstract No. 263, the E. T. Xxxxxxx Survey, Abstract No. 300, and the X. Xxxx Survey, Abstract No. 273, and being oil, gas and mineral leases, xxxxx and equipment described in Assignment and Xxxx of Sale from Vintage Petroleum, Inc. to Rockwall Marketing Corporation, effective September 1, 1998, recorded in Volume 2969, Page 129, Official Records, Bowie County, Texas, said Oil and Gas Properties being more fully described in Schedule II attached hereto and made a part hereof for all purposes. Situated in the County of Bowie, State of Texas, and being 487.829 acres out of the X. X. Xxxxxxx Survey, Abstract No. 263, and the X. X. Xxxxxxx Survey, Abstract No. 300, and being Oil and Gas Properties, Xxxxx and Equipment described in Assignment, Xxxx of Sale and Conveyance from DNA Petroleum, Inc. to Rockwall Marketing Corporation, effective September 1, 1997, recorded in Volume 2761, Page 66, Official Records, C...
and No. 3. The Unit Option consists of Units of our securities where each Unit (priced at $250.00 each) is comprised of (i) a certain number of shares of Common Stock determined by dividing $250.00 (the price of one Unit) by the average of the high and low sale prices of the Company’s publicly traded common stock as reported on the OTCQX on the Unit Purchase Date and (ii) Common Stock purchase warrants to purchase an additional two hundred (200) shares of Common Stock at a per share exercise price of $0.25. The participant’s Plan account will be credited with the number of shares of the Company’s Common Stock and Warrants that are acquired under the Units purchased. Each warrant affords the participant the opportunity to purchase one share of our Common Stock at a warrant exercise price of $0.25. The warrant shall have the Company notation of “ZNWAZ.” The warrant will not be registered for trading on the OTCQX or any other stock market or trading market.
and No. 68. The objective of this Statement is to improve the usefulness of information about pensions included in the general purpose external financial reports of State and local governments for making decisions and assessing accountability. This Statement results from a comprehensive review of the effectiveness of existing standards of accounting and financial reporting for all postemployment benefits with regard to providing decision-useful information, supporting assessments of accountability and inter-period equity, and creating additional transparency. This Statement establishes requirements for defined benefit pensions that are not within the scope of Statement No. 68, Accounting and Financial Reporting for Pensions, as well as for the assets accumulated for purposes of providing those pensions. In addition, it establishes requirements for defined contribution pensions that are not within the scope of Statement No. 68. It also amends certain provisions of Statement No. 67, Financial Reporting for Pension Plans, and Statement No. 68 for pension plans and pensions that are within their respective scopes. The requirements of this Statement extend the approach to accounting and financial reporting established in Statement No. 68 to all pensions, with modifications as necessary to reflect that for accounting and financial reporting purposes, any assets accumulated for pensions that are provided through pension plans that are not administered through trusts that meet the criteria specified in Statement No. 68 should not be considered pension plan assets. It also requires that information similar to that required by Statement No. 68 be included in notes to financial statements and required supplementary information by all similarly situated employers and nonemployer contributing entities. This Statement also clarifies the application of certain provisions of Statements No. 67 and No. 68 with regard to the following issues: Information that is required to be presented as notes to the ten-year schedules of required supplementary information about investment-related factors that significantly affect trends in the amounts reported. Accounting and financial reporting for separately financed specific liabilities of individual employers and nonemployer contributing entities for defined benefit pensions. Timing of employer recognition of revenue for the support of nonemployer contributing entities not in a special funding situation. The requirements of this Stateme...
and No. 2.2) regarding, the technical equipment and installations - referred to hereinafter as systems - that are designated in the machine/equipment list. The most current version of the machine/equipment list shall always apply. The machine/equipment list is an integral part of this contract. Note: Machine or equipment type, location of installation (spatial dimensions, if applicable), serial number, calendar week/year and other information relevant to the contract (spelled out if necessary on additional pages) should be indicated so precisely and thoroughly in the machine/equipment list that the subject of the contract and the covered system components can be assessed without ambiguity. SERVOLIFT
and No. 2 for the City of Bainbridge Island (City) in Kitsap County, Washington. The objectives of the project are to restore capacity of the production xxxxx, update the pumping equipment, and in the case of Sands Well No. 2, remove tooling from the well screen. This work is being targeted for completion in the fall of 2022, when water supply demand is reduced on the City’s water distribution system. Sands Well No. 1 and No. 2 are collocated at the Sands Avenue Well Site (Site) at 8400 Xxxxx Xxx XX, Xxxxxxxxxx Xxxxxx, XX. The Site is located approximately 500 feet south of the Sands Avenue Ballfield. No access issues have been identified at the Site for a typical well rig and support equipment (See Attachment B). The Site is down a short, single-lane driveway on the west side of Sands Avenue NE and the fence around the Site is equipped with a double gate for rig access. Water is available at the Clearwell Building located about 20 feet from the Sands Well No 1 wellhead. This project consists of the following elements, to be completed for each of the two supply xxxxx located at the Site:
and No. 2 are controlled via LIT001 and LIT002. If the water level rises to LIT001 L9 and/ or LIT002 L9, both of the penstocks shall open. If the water level reaches LIT001 L10 and/ or LIT002 L10, both of the penstocks shall close to prevent backflow. If all four pumps have been running for a set time adjustable via timer, an alarm shall be generated to the RCC that the station is been running at continuous maximum demand. Both ultrasonics (LIT001 and LIT002) shall deemed to have failed before secondary control can assume control. Failure of only one ultrasonic shall not affect the other from continuing with automated pump control. The actuated Xxxxxxxxx Xx.0 and No.2 are gravity flow penstocks and shall remain open under normal flows and closed under high flows. The penstocks shall be controlled via LIT001 and LIT002 Secondary Control The backup control consists of hardwired level probes which shall operate as follows: If the water level rises to LS002 L2, the duty pump shall start; The pump shall continue to run until the water level falls below the duty stop level (LS001 L1); If the water level reaches the 1st assist start level (LS004 L4), the assist pump shall start. The duty pump shall continue running; The assist pump shall continue to run until the water level falls below the 1st assist stop level (LS003 L3); If the water level reaches the 2nd assist start level (LS006 L6), the 2nd assist pump shall start. The 1st assist pump and the duty pump shall continue running; The 2nd assist pump shall continue to run until the water level falls below the 2nd assist stop level (LS005 L5). The 1st assist pump and the duty pump shall stop according to (iv) and (ii) respectively. If the water level reaches the 3rd assist start level (LS008 L8), the 3rd assist pump shall start. The 2nd assist pump, the 1st assist pump and the duty pump shall continue running; The 3rd assist pump shall continue to run until the water level falls below the 3rd assist stop level (LS007 L7). The 2nd assist pump, the 1st assist pump and the duty pumps shall stop in accordance with (vi),
and No. 11. An example of an ordinance is provided in Technical Specification Annex No. 17. Examples of Acts are provided in Technical Specification Annex No. 12., No. 13., No. 14.
and No. 16. An example of a Measurement protocol is provided in Technical Specification Annex No. 18. FP-08 Validation of the screen form content The Contractor shall validate the content of all the screen forms applicable to the new System, perform review and content optimisation within the framework of the system analysis. The indicative number of forms is 85 (eighty five) of which 60 (sixty) are the forms intended for users and main users and 25 (twenty five) are forms intended for system administrators. O Compliant *** FP-09 Requirements of the views of individual work places The Contractor shall analyse the users' requirements within the analysis and, in compliance with the IFS functionality possibilities, shall propose solutions regarding the individualised work place views (lobby) as minimum in the scope defined by Chapter 4.4 "Description of TOPS user groups". O Compliant *** FP-10 Digitalisation of production process logs The Contractor shall perform the inventory of the paper form process logs used in the production process within the system analysis. Where possible, the number and content of logs which can be digitalised, i.e. provision of the full cycle of process support by system entries and replacement of the paper process, within the System implementation shall be identified. The number and content of the electronic logs to be introduced within the System implementation shall be agreed with the Employer. The inventory shall be performed (but not limited to) the followiong logs: a) Log of registration of Isolation orders, ordinances; b) Log of gas dangerous works; c) Logs of activities used in hydro power plants; d) Operational logs of production units; e) Equipment event register; f) Switch-overs (beginning - end); g) Daily admission to performance of works; h) Processing of emergency events; Examples of Operation logs are provided in Technical Specification Annex No. 4., No. 5., No. 6., No. 7., No. 8., No. 9., No. 10. and No. 11. O Compliant *** Requirement of the public service provider: Offer ID Requirement title Description Compliance degree Compliance Implementation description FP-11 Validation of the content of standard reports The Contractor shall perform detailed analysis regarding necessary accounts and reports within the system analysis, by proposing performance of accounts by the Business Intelligence software tools as far as possible, by transferring generation of reports from the Crystal Reports environment as far as possible. The indi...
and No. 2 extending the original Agreement and making other various changes; and
