Common use of Application for approval Clause in Contracts

Application for approval. 3.1. The application for approval of a type of Enhanced Child Restraint System shall be submitted by the holder of the trade mark or by his duly accredited representative, and follow the type approval scheme described in Annex 11. 3.2. The application for approval, relating to each type of Enhanced Child Restraint System, shall be accompanied by: 3.2.1. A technical description of the Enhanced Child Restraint System, specifying the straps and other materials used together with the predicted and reproducible behaviour of load limiting devices. It shall be accompanied by drawings of the parts making up the Enhanced Child Restraint System and in the case of retractors, installation instructions for these retractors and their sensing devices, declaration on toxicity (para. 6.3.1.1. of this Regulation) and flammability (para. 6.3.1.2. of this Regulation), the drawings shall show the position intended for a single approval number and additional symbol(s) in relation to the circle of the approval mark; 3.2.2. The applicant shall indicate the kind of application: (a) Application for an i-Size Enhanced Child Restraint Systems; or (b) Application for a Specific vehicle ISOFIX; or (c) Application for a i-Size booster seat Enhanced Child Restraint System; or (d) Application for a specific vehicle booster seat Enhanced Child Restraint System; (e) Application for a Universal Enhanced Child Restraint Systems, or (f) Application for Specific vehicle belted Enhanced Child Restraint Systems; or

Application for approval. 3.1. The application for approval of a type of Enhanced Child Restraint System shall be submitted by the holder of the trade mark xxxx or by his duly accredited representative, representative and follow the type approval scheme described in Annex 11. 3.2. The application for approval, relating to each type of Enhanced Child Restraint System, shall be accompanied by: 3.2.1. A technical description of the Enhanced Child Restraint System, specifying the straps and other materials used together with the predicted and reproducible behaviour of load limiting devices. It shall be accompanied by drawings of the parts making up the Enhanced Child Restraint System and in the case of retractors, installation instructions for these retractors and their sensing devices, declaration on toxicity (paraparagraph 6. 6.3.1.13.1.1. of this Regulation) and flammability (paraparagraph 6. 6.3.1.23.1.2. of this Regulation), the drawings shall show the position intended for a single approval number and additional symbol(s) in relation to the circle of the approval markxxxx; 3.2.2. The applicant shall indicate the kind of application: (a) Application for an i-Size Enhanced Child Restraint Systems; or (b) Application for a Specific specific vehicle ISOFIXISOFIX Enhanced Child Restraint System; or (c) Application for a i-Size booster seat Enhanced Child Restraint System; or (d) Application for a specific vehicle booster seat Enhanced Child Restraint System;; or (e) Application for a Universal Belted Enhanced Child Restraint Systems, ; or (f) Application for Specific vehicle belted Belted Enhanced Child Restraint Systems; or (g) Any combination of (a), (b), (c) and (d) as long as they fulfil paragraph 5.4.2.2., 6.1.2. and 6.1.3. provided there is only one belt route or (h) Any combination of (c), (d), (e), (f), as long as they fulfil paragraphs 5.4.2.2., 6.1.2. and 6.1.3. provided there is only one belt route and that the booster seat is not equipped with ISOFIX connectors 3.2.3. For Enhanced Child Restraint Systems tested on the test trolley in a vehicle body shell in conformity with paragraph 7.1.3.2. of this Regulation or in a complete vehicle in conformity with paragraph 7.1.3.3. of this Regulation, the applicant shall submit documentation (drawings and/or pictures) regarding the combination of the Enhanced Child Restraint System and the car or the ISOFIX seating position and the relevant car environment for which the manufacturer has requested a Specific vehicle approval. This documentation needs to indicate: (a) The available area around the Enhanced Child Restraint System when installed on the vehicle seating position. In particular it shall include parts which might interfere with the Enhanced Child Restraint System during an impact; (b) All relevant vehicle parts which might influence the (rotational) movement of the Enhanced Child Restraint System during an impact, due to their strength or stiffness. 3.2.4. Samples of the Enhanced Child Restraint System requested by the Technical Service responsible for conducting the test; 3.2.5. A 10-metre length of each type of strap used in the Enhanced Child Restraint System; and 3.2.6. Instructions and details of packaging in accordance with paragraph 14. of this Regulation. 3.2.7. In case of a specific vehicle application when tests are performed in a vehicle body shell, a body of the vehicle, including adult seats and the relevant parts of the car environment shall be available. 3.3. Annex 20 lists the minimum documents required to accompany the application for approval as indicated in paragraph 3.2. above and required elsewhere in this Regulation. 3.4. The Type Approval Authority of a Contracting Party shall verify, before granting type approval the existence of satisfactory arrangements and procedures for ensuring effective control so that Enhanced Child Restraint Systems, equipment or parts when in production conform to the approved type.

Application for approval. 3.1. The application for approval of a type of Enhanced Child Restraint System shall be submitted by the holder of the trade mark xxxx or by his duly accredited representative, representative and follow the type approval scheme described in Annex 11. 3.2. The application for approval, relating to each type of Enhanced Child Restraint System, shall be accompanied by: 3.2.1. A technical description of the Enhanced Child Restraint System, specifying the straps and other materials used together with the predicted and reproducible behaviour of load limiting devices. It shall be accompanied by drawings of the parts making up the Enhanced Child Restraint System and in the case of retractors, installation instructions for these retractors and their sensing devices, declaration on toxicity (paraparagraph 6. 6.3.1.13.1.1. of this Regulation) and flammability (paraparagraph 6. 6.3.1.23.1.2. of this Regulation), the drawings shall show the position intended for a single approval number and additional symbol(s) in relation to the circle of the approval markxxxx; 3.2.2. The applicant shall indicate the kind of application: (a) Application for an i-Size Enhanced Child Restraint Systems; or (b) Application for a Specific vehicle ISOFIX; or; (c) Application Or any combination of (a), and (b) as long as they fulfil paragraph 5.4.2.2. 3.2.3. For Enhanced Child Restraint Systems tested on the test trolley in a vehicle body shell in conformity with paragraph 7.1.3.2. of this Regulation or in a complete vehicle in conformity with paragraph 7.1.3.3. of this Regulation, the applicant shall submit documentation (drawings and/or pictures) regarding the combination of the Enhanced Child Restraint System and the car or the ISOFIX seating position and the relevant car environment for which the manufacturer has requested a iSpecific vehicle approval. This documentation needs to indicate: (a) The available area around the Enhanced Child Restraint System when installed on the vehicle seating position. In particular it shall include parts which might interfere with the Enhanced Child Restraint System during an impact; (b) All relevant vehicle parts which might influence the (rotational) movement of the Enhanced Child Restraint System during an impact, due to their strength or stiffness. 3.2.4. Samples of the Enhanced Child Restraint System requested by the Technical Service responsible for conducting the test; 3.2.5. A 10-Size booster seat metre length of each type of strap used in the Enhanced Child Restraint System; orand (d) Application for 3.2.6. Instructions and details of packaging in accordance with paragraph 14. of this Regulation. 3.2.7. In case of a specific vehicle booster seat Enhanced Child Restraint System;application when tests are performed in a vehicle body shell, a body of the vehicle, including adult seats and the relevant parts of the car environment shall be available. (e) Application 3.3. Annex 20 lists the minimum documents required to accompany the application for approval as indicated in paragraph 3.2. above and required elsewhere in this Regulation. 3.4. The Type Approval Authority of a Universal Contracting Party shall verify, before granting type approval the existence of satisfactory arrangements and procedures for ensuring effective control so that Enhanced Child Restraint Systems, or (f) Application for Specific vehicle belted Enhanced Child Restraint Systems; orequipment or parts when in production conform to the approved type.

Application for approval. 3.1. The application for approval of a type of Enhanced Child Restraint System shall be submitted by the holder of the trade mark or by his duly accredited representative, and follow the type approval scheme described in Annex 11. 3.2. The application for approval, relating to each type of Enhanced Child Restraint System, shall be accompanied by: 3.2.1. A technical description of the Enhanced Child Restraint System, specifying the straps and other materials used together with the predicted and reproducible behaviour of load limiting devices. It shall be accompanied by drawings of the parts making up the Enhanced Child Restraint System and in the case of retractors, installation instructions for these retractors and their sensing devices, declaration on toxicity (para. 6.3.1.1. of this Regulation) and flammability (para. 6.3.1.2. of this Regulation), the drawings shall show the position intended for a single approval number and additional symbol(s) in relation to the circle of the approval mark; 3.2.2. The applicant shall indicate the kind of application: (a) Application for an i-Size Enhanced Child Restraint Systems; or (b) Application for a Specific vehicle ISOFIX; or (c) Application for a i-Size booster seat Enhanced Child Restraint System; or (d) Application for a specific vehicle booster seat Enhanced Child Restraint System; (e) Application for a Universal Or any combination of (a),(b),(c) and (d) as long as they fulfil paragraph 5.4.2.2.and 6.1.3.3. 3.2.3. For Enhanced Child Restraint SystemsSystems tested on the test trolley in a vehicle body shell in conformity with paragraph 7.1.3.2. of this Regulation or in a complete vehicle in conformity with paragraph 7.1.3.3. of this Regulation, or the applicant shall submit documentation (fdrawings and/or pictures) Application for Specific vehicle belted regarding the combination of the Enhanced Child Restraint SystemsSystem and the car or the ISOFIX seating position and the relevant car environment for which the manufacturer has requested a Specific vehicle approval. This documentation needs to indicate: (a) The available area around the Enhanced Child Restraint System when installed on the vehicle seating position. In particular it shall include parts which might interfere with the Enhanced Child Restraint System during an impact; (b) All relevant vehicle parts which might influence the (rotational) movement of the Enhanced Child Restraint System during an impact, due to their strength or stiffness. 3.2.4. Samples of the Enhanced Child Restraint System requested by the Technical Service Responsible for conducting the test; 3.2.5. A 10-metre length of each type of strap used in the Enhanced Child Restraint System; orand 3.2.6. Instructions and details of packaging in accordance with paragraph 14 of this Regulation.

Application for approval. 3.1. The application for approval of a type of Enhanced Child Restraint System shall be submitted by the holder of the trade mark or by his xxx duly accredited representative, representative and follow the type approval scheme described in Annex 11. 3.2. The application for approval, relating to each type of Enhanced Child Restraint System, shall be accompanied by: 3.2.1. A technical description of the Enhanced Child Restraint System, specifying the straps and other materials used together with the predicted and reproducible behaviour of load limiting devices. It shall be accompanied by drawings of the parts making up the Enhanced Child Restraint System and in the case of retractors, installation instructions for these retractors and their sensing devices, declaration on toxicity (paraparagraph 6. 6.3.1.13.1.1. of this Regulation) and flammability (paraparagraph 6. 6.3.1.23.1.2. of this Regulation), the drawings shall show the position intended for a single approval number and additional symbol(s) in relation to the circle of the approval mark; 3.2.23.2.0. The Xhe applicant shall indicate the kind of application: (a) Application for an i-Size Enhanced Child Restraint Systems; or (b) Application for a Specific specific vehicle ISOFIXISOFIX Enhanced Child Restraint System; or (c) Application for a i-Size booster seat Enhanced Child Restraint System; or (d) Application for a specific vehicle booster seat Enhanced Child Restraint System;; or (e) Application for a Universal Belted Enhanced Child Restraint Systems, ; or (f) Application for Specific vehicle belted Belted Enhanced Child Restraint Systems; or (g) Any combination of (a), (b), (c) and (d) as long as they fulfil paragraph 5.4.2.2., 6.1.2. and 6.1.3. provided there is only one belt route or (h) Any combination of (c), (d), (e), (f), as long as they fulfil paragraphs 5.4.2.2., 6.1.2. and 6.1.3. provided there is only one belt route and that the booster seat is not equipped with ISOFIX connectors 3.2.3. For Enhanced Child Restraint Systems tested on the test trolley in a vehicle body shell in conformity with paragraph 7.1.3.2. of this Regulation or in a complete vehicle in conformity with paragraph 7.1.3.3. of this Regulation, the applicant shall submit documentation (drawings and/or pictures) regarding the combination of the Enhanced Child Restraint System and the car or the ISOFIX seating position and the relevant car environment for which the manufacturer has requested a Specific vehicle approval. This documentation needs to indicate: (a) The available area around the Enhanced Child Restraint System when installed on the vehicle seating position. In particular it shall include parts which might interfere with the Enhanced Child Restraint System during an impact; (b) All relevant vehicle parts which might influence the (rotational) movement of the Enhanced Child Restraint System during an impact, due to their strength or stiffness. 3.2.4. Samples of the Enhanced Child Restraint System requested by the Technical Service responsible for conducting the test; 3.2.5. A 10-metre length of each type of strap used in the Enhanced Child Restraint System; and 3.2.6. Instructions and details of packaging in accordance with paragraph 14. of this Regulation. 3.2.7. In case of a specific vehicle application when tests are performed in a vehicle body shell, a body of the vehicle, including adult seats and the relevant parts of the car environment shall be available. 3.3. Annex 20 lists the minimum documents required to accompany the application for approval as indicated in paragraph 3.2. above and required elsewhere in this Regulation. 3.4. The Type Approval Authority of a Contracting Party shall verify, before granting type approval the existence of satisfactory arrangements and procedures for ensuring effective control so that Enhanced Child Restraint Systems, equipment or parts when in production conform to the approved type.

Application for approval. 3.1. The application for approval of a type of Enhanced Child Restraint System shall be submitted by the holder of the trade mark xxxx or by his duly accredited representative, and follow the type approval scheme described in Annex 11. 3.2. The application for approval, relating to each type of Enhanced Child Restraint System, shall be accompanied by: 3.2.1. A technical description of the Enhanced Child Restraint System, specifying the straps and other materials used together with the predicted and reproducible behaviour of load limiting devices. It shall be accompanied by drawings of the parts making up the Enhanced Child Restraint System and in the case of retractors, installation instructions for these retractors and their sensing devices, declaration on toxicity (para. 6.3.1.1. of this Regulation) and flammability (para. 6.3.1.2. of this Regulation), the drawings shall show the position intended for a single approval number and additional symbol(s) in relation to the circle of the approval markxxxx; 3.2.2. The applicant shall indicate the kind of application: (a) Application for an i-Size Enhanced Child Restraint Systems; or (b) Application for a Specific vehicle ISOFIX; or (c) Application for a i-Size booster seat Enhanced Child Restraint System; or (d) Application for a specific vehicle booster seat Enhanced Child Restraint System; (e) Application for a Universal Or any combination of (a),(b),(c) and (d) as long as they fulfil paragraph 5.4.2.2.and 6.1.3.3. 3.2.3. For Enhanced Child Restraint SystemsSystems tested on the test trolley in a vehicle body shell in conformity with paragraph 7.1.3.2. of this Regulation or in a complete vehicle in conformity with paragraph 7.1.3.3. of this Regulation, or the applicant shall submit documentation (fdrawings and/or pictures) Application for Specific vehicle belted regarding the combination of the Enhanced Child Restraint SystemsSystem and the car or the ISOFIX seating position and the relevant car environment for which the manufacturer has requested a Specific vehicle approval. This documentation needs to indicate: (a) The available area around the Enhanced Child Restraint System when installed on the vehicle seating position. In particular it shall include parts which might interfere with the Enhanced Child Restraint System during an impact; (b) All relevant vehicle parts which might influence the (rotational) movement of the Enhanced Child Restraint System during an impact, due to their strength or stiffness. 3.2.4. Samples of the Enhanced Child Restraint System requested by the Technical Service Responsible for conducting the test; 3.2.5. A 10-metre length of each type of strap used in the Enhanced Child Restraint System; orand 3.2.6. Instructions and details of packaging in accordance with paragraph 14 of this Regulation.

Application for approval. 3.1. The application for approval of a type of Enhanced Child Restraint System shall be submitted by the holder of the trade mark xxxx or by his duly accredited representative, representative and follow the type approval scheme described in Annex 11. 3.2. The application for approval, relating to each type of Enhanced Child Restraint System, shall be accompanied by: 3.2.1. A technical description of the Enhanced Child Restraint System, specifying the straps and other materials used together with the predicted and reproducible behaviour of load limiting devices. It shall be accompanied by drawings of the parts making up the Enhanced Child Restraint System and in the case of retractors, installation instructions for these retractors and their sensing devices, declaration on toxicity (para. paragraph 6.3.1.1. of this Regulation) and flammability (para. paragraph 6.3.1.2. of this Regulation), the drawings shall show the position intended for a single approval number and additional symbol(s) in relation to the circle of the approval markxxxx; 3.2.2. The applicant shall indicate the kind of application: (a) Application for an i-Size Enhanced Child Restraint Systems; or (b) Application for a Specific specific vehicle ISOFIX; or (c) Application for a i-Size booster seat Enhanced Child Restraint System; or (d) Application for a specific vehicle booster seat Enhanced Child Restraint System; (e) Application for a Universal Or any combination of (a), (b), (c) and (d) as long as they fulfil paragraphs 5.4.2.2. and 6.1.3.3. 3.2.3. For Enhanced Child Restraint SystemsSystems tested on the test trolley in a vehicle body shell in conformity with paragraph 7.1.3.2. of this Regulation or in a complete vehicle in conformity with paragraph 7.1.3.3. of this Regulation, or the applicant shall submit documentation (fdrawings and/or pictures) Application for Specific vehicle belted regarding the combination of the Enhanced Child Restraint Systems; orSystem and the car or the ISOFIX seating position and the relevant car environment for which the manufacturer has requested a Specific vehicle approval. This documentation needs to indicate: (a) The available area around the Enhanced Child Restraint System when installed on the vehicle seating position. In particular it shall include parts which might interfere with the Enhanced Child Restraint System during an impact; (b) All relevant vehicle parts which might influence the (rotational) movement of the Enhanced Child Restraint System during an impact, due to their strength or stiffness.

Application for approval. 3.1. The application for approval of a type of Enhanced Child Restraint System shall be submitted by the holder of the trade mark xxxx or by his duly accredited representative, and follow the type approval scheme described in Annex 11. 3.2. The application for approval, relating to each type of Enhanced Child Restraint System, shall be accompanied by: 3.2.1. A technical description of the Enhanced Child Restraint System, specifying the straps and other materials used together with the predicted and reproducible behaviour of load limiting devices. It shall be accompanied by drawings of the parts making up the Enhanced Child Restraint System and in the case of retractors, installation instructions for these retractors and their sensing devices, declaration on toxicity (para. 6.3.1.1. of this Regulation) and flammability (para. 6.3.1.2. of this Regulation), the drawings shall show the position intended for a single approval number and additional symbol(s) in relation to the circle of the approval markxxxx; 3.2.2. The applicant shall indicate the kind of application: (a) Application for an i-Size Enhanced Child Restraint Systems; or (b) Application for a Specific vehicle ISOFIX; or (c) Application for a i-Size booster seat Enhanced Child Restraint System; or (d) Application for a specific vehicle booster seat Enhanced Child Restraint System; (e) Application for a Universal Or any combination of (a), and (b),(c) and (d) as long as they fulfil paragraph 5.4.2.2.and 6.1.3.3. 3.2.3. For Enhanced Child Restraint SystemsSystems tested on the test trolley in a vehicle body shell in conformity with paragraph 7.1.3.2. of this Regulation or in a complete vehicle in conformity with paragraph 7.1.3.3. of this Regulation, or the applicant shall submit documentation (fdrawings and/or pictures) Application for Specific vehicle belted regarding the combination of the Enhanced Child Restraint SystemsSystem and the car or the ISOFIX seating position and the relevant car environment for which the manufacturer has requested a Specific vehicle approval. This documentation needs to indicate: (a) The available area around the Enhanced Child Restraint System when installed on the vehicle seating position. In particular it shall include parts which might interfere with the Enhanced Child Restraint System during an impact; (b) All relevant vehicle parts which might influence the (rotational) movement of the Enhanced Child Restraint System during an impact, due to their strength or stiffness. 3.2.4. Samples of the Enhanced Child Restraint System requested by the Technical Service Responsible for conducting the test; 3.2.5. A 10-metre length of each type of strap used in the Enhanced Child Restraint System; orand 3.2.6. Instructions and details of packaging in accordance with paragraph 14 of this Regulation.

Application for approval. 3.1. The application for approval of a type of Enhanced Child Restraint System shall be submitted by the holder of the trade mark xxxx or by his duly accredited representative, representative and follow the type approval scheme described in Annex 11. 3.2. The application for approval, relating to each type of Enhanced Child Restraint System, shall be accompanied by: 3.2.1. A technical description of the Enhanced Child Restraint System, specifying the straps and other materials used together with the predicted and reproducible behaviour of load limiting devices. It shall be accompanied by drawings of the parts making up the Enhanced Child Restraint System and in the case of retractors, installation instructions for these retractors and their sensing devices, declaration on toxicity (paraparagraph 6. 6.3.1.13.1.1. of this Regulation) and flammability (paraparagraph 6. 6.3.1.23.1.2. of this Regulation), the drawings shall show the position intended for a single approval number and additional symbol(s) in relation to the circle of the approval markxxxx; 3.2.2. The applicant shall indicate the kind of application: (a) Application for an i-Size Enhanced Child Restraint Systems; or (b) Application for a Specific specific vehicle ISOFIX; or (c) Application for a i-Size booster seat Enhanced Child Restraint System; or (d) Application for a specific vehicle booster seat Enhanced Child Restraint System; (e) Application Or any combination of (a), (b), (c) and (d) as long as they fulfil paragraphs 5.4.2.2. and 6.1.3.3. 3.2.3. For Enhanced Child Restraint Systems tested on the test trolley in a vehicle body shell in conformity with paragraph 7.1.3.2. of this Regulation or in a complete vehicle in conformity with paragraph 7.1.3.3. of this Regulation, the applicant shall submit documentation (drawings and/or pictures) regarding the combination of the Enhanced Child Restraint System and the car or the ISOFIX seating position and the relevant car environment for which the manufacturer has requested a Universal Specific vehicle approval. This documentation needs to indicate: (a) The available area around the Enhanced Child Restraint System when installed on the vehicle seating position. In particular it shall include parts which might interfere with the Enhanced Child Restraint System during an impact; (b) All relevant vehicle parts which might influence the (rotational) movement of the Enhanced Child Restraint System during an impact, due to their strength or stiffness. 3.2.4. Samples of the Enhanced Child Restraint System requested by the Technical Service responsible for conducting the test; 3.2.5. A 10-metre length of each type of strap used in the Enhanced Child Restraint System; and 3.2.6. Instructions and details of packaging in accordance with paragraph 14. of this Regulation. 3.2.7. In case of a specific vehicle application when tests are performed in a vehicle body shell, a body of the vehicle, including adult seats and the relevant parts of the car environment shall be available. 3.3. Annex 20 lists the minimum documents required to accompany the application for approval as indicated in paragraph 3.2. above and required elsewhere in this Regulation. 3.4. The Type Approval Authority of a Contracting Party shall verify, before granting type approval the existence of satisfactory arrangements and procedures for ensuring effective control so that Enhanced Child Restraint Systems, or (f) Application for Specific vehicle belted Enhanced Child Restraint Systems; orequipment or parts when in production conform to the approved type.