Termination for Withdrawal of Authority Enterprise Services may suspend or terminate this Master Contract if, during the term hereof, Enterprise Services’ procurement authority is withdrawn, reduced, or limited such that Enterprise Services, in its judgment, would lack authority to enter into this Master Contract; Provided, however, that such suspension or termination for withdrawal of authority shall only be effective upon twenty (20) days prior written notice; and Provided further, that such suspension or termination for withdrawal of authority shall not relieve any Purchaser from payment for goods and/or services already ordered as of the effective date of such notice. Except as stated in this provision, in the event of such suspension or termination for withdrawal of authority, neither Enterprise Services nor any Purchaser shall have any obligation or liability to Contractor.
Partial Withdrawals At any time any Holder shall be entitled to request a withdrawal of such portion of the Interest held by such Holder as such Holder shall request.
Applications for Payment 9.3.1 At least ten days before the date for each progress payment established in the State- Contractor Agreement, the Contractor shall submit to the Architect an itemized Application for Payment, notarized if required, supported by such data substantiating the Contractor's right to payment as the State or the Architect may require. The application for payment must, at a minimum, reflect retainage and the required waivers of lien and any other support documentation enumerated elsewhere in the Contract Documents.
9.3.2 Unless otherwise provided in the Contract Documents, payments will be made on account of materials or equipment not incorporated in the Work but delivered and suitably stored at the site and, if approved in advance by the State, payments may similarly be made for materials or equipment suitably stored at some other location agreed upon in writing. Payments for materials or equipment stored on or off the site shall be conditioned upon submission by the Contractor of bills of sale or such other procedures satisfactory to the State to establish the State's title to such materials or equipment or otherwise protect the State's interest, including applicable insurance and transportation to the site for those materials and equipment stored off the site.
9.3.3 The Contractor warrants that title to all Work, materials and equipment covered by an Application for Payment will pass to the State either by incorporation in the construction or upon the receipt of payment by the Contractor, whichever occurs first, free and clear of all liens, claims, security interests or encumbrances, hereinafter referred to in this Article 9 as "liens"; and that no Work, materials or equipment covered by an Application for Payment will have been acquired by the Contractor, or by any other person performing Work at the site or furnishing materials and equipment for the Project, subject to an agreement under which an interest therein or an encumbrance thereon is retained by the seller or otherwise imposed by the Contractor or such other person.
Notice of Final Withdrawal Promptly after receipt by the Paying Agent of notice that the Escrow Agent has requested a Final Withdrawal or that a Final Withdrawal will be made, the Paying Agent shall cause notice of the distribution of the Final Withdrawal to be mailed to each of the Receiptholders at its address as it appears in the Register. Such notice shall be mailed not less than 15 days prior to the Final Withdrawal Date. Such notice shall set forth:
(i) the Final Withdrawal Date and the date for determining Receiptholders of record who shall be entitled to receive distributions in respect of the Final Withdrawal,
(ii) the amount of the payment in respect of the Final Withdrawal for each $1,000 face amount Certificate (based on information provided by the Pass Through Trustee) and the amount thereof constituting unused Deposits (as defined in the Deposit Agreement) and interest thereon, and
(iii) if the Final Withdrawal Date is the same date as a Regular Distribution Date, the total amount to be received on such date for each $1,000 face amount Certificate (based on information provided by the Pass Through Trustee). Such mailing may include any notice required to be given to Certificateholders in connection with such distribution pursuant to the Pass Through Trust Agreement.
Permissible Withdrawals The Servicer may make withdrawals from each related Custodial P&I Account solely for the following:
(a) remittances to the related Certificate Account;
(b) reimbursement to itself for advances which have been recovered by subsequent collections including late payments, Liquidation Proceeds or Insurance Proceeds, to the extent funds on deposit recovered by such subsequent collections relate to the Mortgage Loans as to which such advances were made;
(c) interest earnings on deposits to the related Custodial P&I Account, but only to the extent that such interest has been credited;
(d) removal of amounts deposited in error;
(e) removal of charges or other such amounts deposited on a temporary basis in the account;
(f) removal of Servicing Fees to the extent deposited therein; and
(g) termination of the account.
No Withdrawal No Person shall be entitled to withdraw any part of such Person’s Capital Contribution or Capital Account or to receive any Distribution from the Company, except as expressly provided in this Agreement.
Withdrawal Events In the event of the death, retirement, withdrawal, expulsion, or dissolution of a Member, or an event of bankruptcy or insolvency, as hereinafter defined, with respect to a Member, or the occurrence of any other event which terminates the continued membership of a Member in the Company pursuant to the Statutes (each of the foregoing being hereinafter referred to as a “Withdrawal Event”), the Company shall terminate sixty days after notice to the Members of such withdrawal Event unless the business of the Company is continued as hereinafter provided. Notwithstanding a Withdrawal Event with respect to a Member, the Company shall not terminate, irrespective of applicable law, if within aforesaid sixty day period the remaining Members, by the unanimous vote or consent of the Members (other than the Member who caused the Withdrawal Event), shall elect to continue the business of the Company. In the event of a Withdrawal Event with respect to an Member, any successor in interest to such Member (including without limitation any executor, administrator, heir, committee, guardian, or other representative or successor) shall not become entitled to any rights or interests of such Member in the Company, other than the allocations and distributions to which such Member is entitled, unless such successor in interest is admitted as a Member in accordance with this Agreement. An “event of bankruptcy or insolvency” with respect to a Member shall occur if such Member:
Refund for Withdrawal Due to Non-Delivery of Course The PEI will notify the Student within three (3) working days upon knowledge of any of the following: (i) It does not commence the Course on the Course Commencement Date; (ii) It terminates the Course before the Course Commencement Date; (iii) It does not complete the Course by the Course Completion Date; (iv) It terminates the Course before the Course Completion Date; (v) It has not ensured that the Student meets the course entry or matriculation requirement as set by the organisation stated in Schedule A within any stipulated timeline set by CPE; or (vi) The Student’s Pass application is rejected by Immigration and Checkpoints Authority (ICA). The Student should be informed in writing of alternative study arrangements (if any), and also be entitled to a refund of the entire Course Fees and Miscellaneous Fees already paid should the Student decide to withdraw, within seven (7) working days of the above notice.
Application for Payment The form acceptable to Owner that is to be used by the Contractor during the course of the Work in requesting payment from the Owner and that is to be accompanied by such supporting documentation as is required by the Contract Documents.
Application Form To apply for a pole attachment or conduit occupancy license under this Agreement, Applicant shall submit to SWBT two signed copies of the appropriate application forms. SWBT represents that the forms specified in subsections (a)-(b) are forms in use prior to the effective date of this Agreement and that SWBT is in the process of revising such forms to conform to the provisions of this Agreement and to streamline the application process. The parties therefore agree that the forms specified in subsections (a) and (b) will be interim forms only. SWBT reserves the right to change the format and content of these forms upon 60 days written notice to Applicant.
(a) To apply for a pole attachment license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make- Ready Authorization”) together with completed Form SW-9433 (“Pole Attachments”). An application for a pole attachment license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9433 and SW-9434 are attached to this Agreement as parts of APPENDIX III.
(b) To apply for a conduit occupancy license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make-Ready Authorization”) together with completed Form SW-9435 (“Conduit Occupancy”). An application for a conduit occupancy license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9434 and SW-9435 are attached to this Agreement as parts of APPENDIX III.
(c) Each application for a license under this Agreement shall include, at a minimum, the following information:
(1) the poles, ducts, and conduits (including all manholes) along Applicant’s proposed route to or within which Applicant desires to attach or place its facilities;
(2) a description of the facilities to be attached to SWBT’s poles and a description of the facilities to be placed within each component of SWBT’s conduit system (including but not limited to ducts, conduits, manholes, and handholes) along the proposed route;
(3) for poles, the proposed points of attachment;
(4) for building entrance or building distribution ducts or conduits or other space within a building, a conspicuous statement, as required by Section 5.06 of this Agreement, that the application pertains to a building entrance or building distribution duct or conduit or other space within a building;
(5) if applicable, a conspicuous notation that the space requested is not to be assigned (or billed) to Applicant until SWBT has received Applicant’s written instruction to make such assignment or issued a license authorizing Applicant to occupy the space requested; and
(6) if applicable, a conspicuous statement that Applicant intends to occupy the space before the issuance of a license, as provided in Section 8.03 of this Agreement.
(d) Facilities descriptions which apply to multiple pole attachments or conduit occupancies need only be described once on any form. Facilities descriptions shall include, at a minimum, the following information:
(1) the number and types of cables, including the physical size (diameter) and weight (weight per foot);
(2) the number and types of strands, if any, which will be used to support the cables, including the rated holding capacity expressed in thousand pound increments (e.g., 2.2M) of such strands; and
(3) sufficient information to identify and describe the physical characteristics (size, dimensions, and weight) of apparatus enclosures and other facilities to be attached to SWBT’s poles or placed in SWBT’s conduit system.
(e) When it appears to Applicant that facilities modification, capacity expansion, or make-ready work may be required to accommodate Applicant’s access requests, Applicant shall describe the facilities modification, capacity expansion, or make-ready work which Applicant proposes. Applicant shall also describe its plans, if any, to use any infrequent construction technique or connectivity solution authorized under Section 6.03 to avoid high or unusual expenditures and state its reasons for the use of such technique or solution.
(f) Applicant acknowledges that the poles along a particular pole line or route may include poles owned by firms (such as electric utilities) other than SWBT, that it may be necessary for SWBT to rearrange its facilities or perform other make-ready work on poles other than poles it owns or controls in order to accommodate Applicant’s request for access to SWBT’s poles and that, at the time an application is submitted, it may be difficult for Applicant to determine with certainty whether a particular pole is owned or controlled by SWBT or by another entity. Accordingly, the application shall, to the extent feasible, identify all poles utilized by SWBT (without regard to ownership) along Applicant’s proposed route.
(g) Each application for a license under this Agreement shall be accompanied by a construction schedule showing Applicant’s projected dates for beginning and completing construction at the sites specified in the application. Information on this schedule may be used by SWBT’s engineering and outside plant construction personnel in scheduling work required to process Applicant’s applications and scheduling such capacity expansions, make- ready work, and facilities modifications, if any, as may be necessary to accommodate Applicant’s facilities.
(h) Applicant may include multiple cables in a single license application and may provide multiple services (e.g., CATV and non-CATV services) under the same cable sheath or jacket. When both CATV and non-CATV services are provided under the same cable sheath or jacket, or CATV and non-CATV services are provided using different cables attached or lashed to the same strand or otherwise occupying the same space on a pole or the same duct or inner duct within a conduit, Applicant will so advise SWBT and SWBT shall, if permitted by law, adjust its charges to enable SWBT to charge Applicant the rate applicable to telecommunications carriers rather than the rate applicable to cable television systems solely to provide cable service.
