APQP Sample Clauses

APQP. In order to reach the target of Zero Defect at all stages of cooperation, supplier must conduct an APQP for all prototypes and pre-serial and serial production deliveries. APQP has to document the quality at all stages of trials and must be approved by KOH-I-XXXX XXXXX s.r.o. The APQP must be carried out in compliance with VDA or in compliance with AIAG.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
APQP. AIAG provides the Advanced Product Quality Planning and Control Plan (APQP) reference manual. A cross-functional team is expected to contribute to the process if required. Lean manufacturing, Kaizen, Six Sigma, Poka Yoke, Error proofing, and 5S are examples of disciplines that should be considered during APQP.
Sample 1Sample 2
APQP. Advanced product quality planning Before issuing a price quotation, the supplier shall make sure that the product can be made and the requirements written in the documentation sent by S.C. RULMENTI S.A. Barlad can be met. Before starting any project, the supplier and S.C. RULMENTI S.A. Barlad can arrange feasibility meetings to analyse technical specifications of the project, to determine the time within the supplier shall deliver the samples, PPAP files, to establish the targets etc. The supplier shall develop the APQP + Control Plan stages, according to the latest edition of the AIAG manual, in order to prepare the series production by
Sample 1
APQP. Advance Product Quality Planning 2. GP-5T Problem Reporting and Resolutions 3. GP-8T Continuous Improvement Procedures 4. GP-9T Run at Rate (e) Control Plans will be submitted for all locations. (f) Driver certification and training programs are to be established. A periodical rectification program for continuous improvement of driver skills will be established. (g) All trucks and trailers will be equipped with a "Decks Up" warning system to alert the operator. (h) Vehicles must be shipped in accordance with the latest revision of the GM Vehicle Shipping Manual. (i) A second tier supplier used for trip leasing must be pre-approved by GM NAO Vehicle Logistics Vehicle Quality Assurance.
Sample 1
APQP. Advance Product Quality Planning 2. GP-5T Problem Reporting and Resolutions 3. GP-8T Continuous Improvement Procedures 4. GP-9T Run at Rate (e) Control Plans will be submitted for all locations. (f) Driver certification and training programs are to be established. A periodical rectification program for continuous improvement of driver skills will be established. (g) All trucks and trailers will be equipped with a "Decks Up" warning system to alert the operator. (h) Vehicles must be shipped in accordance with the latest revision of the GM Vehicle Shipping Manual. (i) A second tier supplier used for trip leasing must be pre-approved by GM NAO Vehicle Logistics Vehicle Quality Assurance. (j) Carrier will provide a loading inspector to cover all hours of loading operations. (k) A third party inspection will be required at all operations. The third party will be selected by GM. The cost of this third party will be shared by each Carrier at the same location. (1) Security shall be provided by Pinkxxxxx xx all Assembly Centers and paid for by the Carrier. Such security is required for plant yard areas falling under Carrier responsibility. (m) All facility layout changes must be pre-approved by GM NAO Vehicle Logistics Quality Assurance Manager. ---------- * Deleted per the Company's request for confidential testament and filed separately with the Securities and Exchange Commission pursuant to Rule 24b-2 of the Exchange Act of 1934.
Sample 1
APQP. Advance Product Quality Planning 2. GP-5T Problem Reporting and Resolutions 3. GP-8T Continuous Improvement Procedures 4. GP-9T Run at Rate (e) Control Plans will be submitted for all locations. (f) Driver certification and training programs are to be established. A periodical rectification program for continuous improvement of driver skills will be established. (g) All trucks and trailers will be equipped with a "Decks Up" warning system to alert the operator. (h) Vehicles must be shipped in accordance with the latest revision of the GM Vehicle Shipping Manual. (i) A second tier supplier used for trip leasing must be pre-approved by GM NAO Vehicle Logistics Vehicle Quality Assurance. (j) Carrier will provide a loading inspector to cover all hours of loading operations. (k) A third-party inspection will be required at all operations. The third party will be selected by GM. The cost of this third party will be shared by each Carrier at the same location. (1) Security shall be provided by Xxxxxxxxx at all Assembly Centers and paid for by the Carrier. Such security is required for plant yard areas falling under Carrier responsibility.
Sample 1
APQP. APQP is the planning of the component development tasks, which must be accomplished by Buyer and Seller to achieve the quality goals. APQP must be shared by the Buyer SQA and the Seller and be periodically monitored by Buyer SQA. APQP consists in a list of tasks. According to component criticises, Buyer decides what tasks must be applied and monitored on the involved component. The list of potential tasks is the following one:
Sample 1
AutoNDA by SimpleDocs

Related to APQP

  • Anti-Layering The Company shall not incur, create, issue, assume, guarantee or otherwise become liable for any Indebtedness that is both (a) subordinate or junior in right of payment to any Senior Debt and (b) senior in any respect in right of payment to the Notes. No Subsidiary Guarantor shall incur, create, issue, assume, guarantee or otherwise become liable for any Indebtedness that is both (a) subordinate or junior in right of payment to its Senior Debt and (b) senior in right of the Section 4.9 hereof.

  • Red Flags Services (1) The provisions of this Section 3(c) (the “Red Flags Section”) shall apply in the event the Fund elects to receive the “Red Flags Services”, which are hereby defined to mean the following services:

  • Sub-licensing The Licensee shall be entitled to grant sub-licences of its rights under this Agreement to any person, provided that:

  • Distributors In addition to direct sales to Clients, Supplier grants Accenture: (i) the right to resell Products and Services to a third-party distributor (“Distributor”) for resale to Client or to a financing company for leasing to Client.

  • Manufacturing and Marketing Rights The Company has not granted rights to manufacture, produce, assemble, license, market, or sell its products to any other person and is not bound by any agreement that affects the Company's exclusive right to develop, manufacture, assemble, distribute, market, or sell its products.

  • Distribution Services The Distributor shall sell and repurchase Shares as set forth below, subject to the registration requirements of the 1933 Act and the rules and regulations thereunder, and the laws governing the sale of securities in the various states ("Blue Sky Laws"):

  • Anti-Bribery RECIPIENT and SANOFI agree that the arrangements set out in this Agreement do not take effect and are not intended to take effect as an incentive or reward for a person’s past, present or future willingness to prescribe, administer, recommend (including formal recommendations), purchase, pay for, reimburse, authorize, approve or supply any product or service sold or provided by SANOFI or as an incentive to grant an interview for any sales or marketing purposes. RECIPIENT warrants, that it will comply with the requirements of all applicable anti-bribery regulations, codes and/or sanctions, both national and foreign, including but not limited to the US Foreign Corrupt Practices Act, the UK Bribery Act and the OECD Convention dated 17th December 1997 (the “Anti-Bribery Laws”) and; therefore that it has not and will not make, promise or offer to make any payment or transfer anything of value (directly or indirectly) to (i) any individual, (ii) corporation, (iii) association, (iv) partnership, or (v) public body, (including but not limited to any officer or employee of any of the foregoing) who, acting in their official capacity or of their own accord, are in a position to influence, secure or retain any business for (and/or provide any financial or other advantage to) SANOFI by improperly performing a function of a public nature or a business activity with the purpose or effect of public or commercial bribery, acceptance of or acquiescence in extortion, kickbacks or other unlawful or improper means of obtaining or retaining business. RECIPIENT will immediately notify SANOFI if, at any time during the term of this Agreement, its circumstances, knowledge or awareness changes such that it would not be able to repeat the warranties set out above at the relevant time. RECIPIENT shall keep detailed and up to date books of the account and records of all acts and payments made by it in relation to this Agreement for a minimum period of seven (7) years and at SANOFI request make them available for inspection. RECIPIENT will ensure that such books of account and records are sufficient to enable SANOFI to verify their compliance with this section of the Agreement. Breach by the RECIPIENT of the terms of this Section will be deemed a material breach of this Agreement and SANOFI may immediately terminate this Agreement at any time, with immediate effect and without any opportunity to remedy the breach by the RECIPIENT, by giving notice in writing to the RECIPIENT. The rights to terminate this Agreement under this Section will be without prejudice to any other right or remedy SANOFI may have accrued up to the date of termination.

  • Exclusive Services Executive shall at all times faithfully, industriously and to the best of his or her ability, experience and talent perform to the satisfaction of the Board and the CEO all of the duties that may be assigned to Executive hereunder and shall devote substantially all of his or her productive time and efforts to the performance of such duties. Subject to the terms of the Employee Confidentiality and Invention Assignment Agreement referred to in Section 5(b), this shall not preclude Executive from devoting time to personal and family investments or serving on community and civic boards, or participating in industry associations, provided such activities do not interfere with his or her duties to the Company, as determined in good faith by the CEO. Executive agrees that he or she will not join any boards, other than community and civic boards (which do not interfere with his or her duties to the Company), without the prior approval of the CEO.

  • Shareholder Internet Services The Transfer Agent shall provide internet access to the Fund’s shareholders through a designated web site (“Shareholder Internet Services”), which will be accessed by the Fund’s shareholders via a link on the Fund’s web site. The Shareholder Internet Services will be provided pursuant to established procedures and will allow shareholders to view their account information and perform certain on-line transaction request capabilities. The Shareholder Internet Services shall be provided at no additional charge, other than the transaction fees currently being charged for the different transactions as described on the Fee Schedule. The Transfer Agent reserves the right to charge a fee for this service in the future.

  • Sub-Contracting 31.1. The Authority approves the appointment of the sub-contractors specified in Schedule 10 (Approved Sub-contractors) in respect of the obligations specified in that Schedule.

Time is Money Join Law Insider Premium to draft better contracts faster.