Australian Requirements Sample Clauses

Australian Requirements. The Lender shall have received a verification certificate for each of Unilife Medical Solutions Pty Limited and Unitract Syringe Pty Ltd in form and substance satisfactory to the Lender properly completed and with all required attachments, duly signed by a director (in his or her capacity as director) and dated no earlier than two Business Days before the Closing Date.
AutoNDA by SimpleDocs
Australian Requirements. In the absence of more specific requirements of the local regulatory authority, inspections should be carried out on all suspended scaffolds, cantilevered scaffolds, spur scaffolds and hung scaffolds and to any other scaffold from which a person or object could fall more than 4 m. These scaffolds and their supporting structures will require inspection: • Before the first use. • At intervals not exceeding 30 days. • As soon as practicable and prior to further use following an occurrence that could have affected the stability or adequacy of the scaffold, such as severe storm conditions or an earthquake. • Prior to its use following repairs. In each case, the employer must ensure that no work is carried out from the scaffold, unless written confirmation has been obtained that the scaffold, or its relevant portion, is complete. The person who carries out compliance inspections and provides the written confirmation must be competent. Suitable persons are those with an appropriate scaffolding certificate of competency, a recognized scaffolding inspection qualification, or the designer. However, where complex scaffold designs are used, or expert judgement regarding the strength, rigidity or deterioration of supporting structures is needed, the person carrying out inspections may require the advice of an engineer experienced in structural design, a geotechnical engineer or a geologist, as appropriate. It is recommended that the handover certificates, records of inspection and repairs and maintenance details be held on site in an accessible format, until the scaffold has been completely dismantled. Inspection records should include: • The individual identification number or mark of the scaffold. • Any relevant design or specification reference. • The location of the scaffold. • The purpose for which the scaffold is provided. • The date and time of each inspection. • Comments on each inspection. • The name and signature of the person conducting the inspection.

Related to Australian Requirements

  • Application Requirements This application shall contain, as a minimum, a sketch showing the location of proposed facilities; a description, sketch, manufacturer’s brochure, etc. of the proposed facilities; and a description of the operation proposed. (11-28-90) 101. -- 199. (RESERVED)‌ 200. OPERATIONAL AGREEMENT.‌‌

  • Notification Requirements 1. If the Family Leave is foreseeable, the employee must provide the agency/department with thirty (30) calendar days notice of his or her intent to take Family Leave. 2. If the event necessitating the Family Leave becomes known to the employee less than thirty (30) calendar days prior to the employee's need for Family Leave, the employee must provide as much notice as possible. In no case shall the employee provide notice later than five (5) calendar days after he or she learns of the need for Family Leave. 3. For foreseeable leave due to a qualifying exigency, an employee must provide notice of the need for leave as soon as practicable, regardless of how far in advance such leave is foreseeable. 4. When the Family Leave is for the purpose of the scheduled medical treatment or planned medical care of a child, parent, spouse or registered domestic partner, the employee shall, to the extent practicable, schedule treatment and/or care in a way that minimizes disruption to agency/department operations.

  • Margin Requirements 10.1 The Client shall provide and maintain the Initial Margin and/or Hedged Margin in such limits as the Company, at its sole discretion, may determine at any time under the Contract Specifications for each type of CFD. 10.2 It is the Client’s responsibility to ensure that he understands how a Margin is calculated. 10.3 The Company has the right to amend any entry in the Contract Specifications section for each CFD including margin requirements, and these changes may take effect on both new and existing/open Positions/trades; which may be declared through an internal mail message or on the company’s Corporate website, unless a Force Majeure Event has occurred. 10.4 The Company has the right to change Margin requirements without prior Written Notice to the Client in the case of Force Majeure Event. In this situation the Company has the right to apply new Margin requirements to the new positions and to the positions, which are already open. 10.5 If at any time Equity is less than 20% of the Necessary Margin, the Company has the right to close any or all of the Client’s Open Positions at any time without the Client’s consent or any prior Written Notice to him. In order to determine if the Client has breached this clause, any sums referred to therein which are not denominated in the Currency of the Client Account shall be treated as if they were denominated in the Currency of the Client Account by converting them into the Currency of the Client Account at the relevant exchange rate for spot dealings in the foreign exchange market. 10.6 The Client has the responsibility to notify the Company as soon as he believes that he will be unable to meet a Margin payment when due. 10.7 The Company has no obligation to make Margin Calls for the Client. 10.8 Where the Company effects or arranges a Transaction involving an Instrument, the Client should note that, depending upon the nature of the Transaction, he may be liable to make further payments when the Transaction fails to be completed or upon the earlier settlement or closing out of his position. He may be required to make further variable payments by way of Margin against the purchase price of the Instrument, instead of paying (or receiving) the whole purchase (or sale) price immediately. The movement in the market price of the Client’s investment will affect the amount of margin payment he will be required to make. The Client agrees to pay the Company on demand such sums by way of margin as are required from time to time under the Rules of any relevant Market (if applicable) or as the Company may in its discretion reasonably require for the purpose of protecting itself against loss or risk of loss on present, future or contemplated Transactions under this Agreement. 10.9 Any account on Margin call needs to be cautious of equity as the account will be stopped out by closing all Open Positions as the equity reaches 20 % equity to margin level: all pending orders for the stopped-out account will be deleted, and any deficit that may result after liquidation will be handled and covered by the client 10.10 If the Client breaches clause 10.9., the Company has the right to close partially or totally the Clients Open Positions in order for the client Account to go above the required percentage 10.11 Xxxxxx can be transferred to the company via bank wire transfer or any of the applied deposits methods. 10.12 The Client undertakes neither to create nor to have outstanding any security interest whatsoever over, nor to agree to assign or transfer, any of the Margin transferred to the Company.

  • Information Requirements The Company covenants that, if at any time before the end of the Effectiveness Period the Company is not subject to the reporting requirements of the Exchange Act, it will cooperate with any Holder and take such further reasonable action as any Holder may reasonably request in writing (including, without limitation, making such reasonable representations as any such Holder may reasonably request), all to the extent required from time to time to enable such Holder to sell Registrable Securities without registration under the Securities Act within the limitation of the exemptions provided by Rule 144 and Rule 144A under the Securities Act and customarily taken in connection with sales pursuant to such exemptions. Upon the written request of any Holder, the Company shall deliver to such Holder a written statement as to whether it has complied with such filing requirements, unless such a statement has been included in the Company’s most recent report filed pursuant to Section 13 or Section 15(d) of Exchange Act. Notwithstanding the foregoing, nothing in this Section 7 shall be deemed to require the Company to register any of its securities (other than the Common Stock) under any section of the Exchange Act.

  • Participation Requirements The Recipient must work with Canada and AMO when asked to collaborate on communications activities – including, but not limited to, Eligible Project success stories (including positive impacts on housing), Eligible Project vignettes, and Eligible Project start-to-finish features.

  • GRADUATION REQUIREMENTS I understand that in order to graduate from the program and to receive a certificate of completion, diploma or degree I must successfully complete the required number of scheduled clock hours as specified in the catalog and on the Enrollment Agreement, pass all written and practical examinations with a minimum score of 80%, and complete all required clinical hours and satisfy all financial obligations to the College.

  • Documentation Requirements ODM shall pay the MCP after it receives sufficient documentation, as determined by ODM, detailing the MCP’s Ohio Medicaid-specific liability for the Annual Fee. The MCP shall provide documentation that includes the following: 1. Total premiums reported on IRS Form 8963;

  • Publication Requirements Those seeking to include renderings of more than 10 images from the UND Biometrics Database in reports, papers, and other documents to be published or released must first obtain approval in writing from the UND Principal Investigator. In no case should the face images be used in a way that could cause the original subject embarrassment or mental anguish.

  • Construction Requirements (a) All Life and Safety and applicable Building Codes will be strictly enforced (i.e., tempered glass, fire dampers, exit signs, smoke detectors, alarms, etc.). Prior coordination with the Building Manager is required. (b) Electric panel schedules must be brought up to date identifying all new circuits added. (c) All electrical outlets and lighting circuits are to be properly identified. Outlets will be labeled on back side of each cover plate. (d) All electrical and phone closets being used must have panels replaced and doors shut at the end of each day’s work. Any electrical closet that is opened with the panel exposed must have a work person present. (e) All electricians, telephone personnel, etc. will, upon completion of their respective projects, pick up and discard their trash leaving the telephone and electrical rooms clean. If this is not complied with, a clean-up will be conducted by the building janitors and the general contractor will be back-charged for this service. (f) Welding or burning with an open flame will not be done without prior approval of the Building Manager. Fire extinguishers must be on hand at all times. (g) All “anchoring” of walls or supports to the concrete are not to be done during normal working hours (7:30 AM—6:00 PM, Monday through Friday). This work must be scheduled before or after these hours during the week or on the weekend. (h) All core drilling is not to be done during normal working hours (7:30 AM—6:00 PM, Monday through Friday). This work must be scheduled before or after these hours during the week or on the weekend. (i) All HVAC work must be inspected by the Building Engineer. The following procedures will be followed by the general contractor: i) A preliminary inspection of the HVAC work in progress will be scheduled through the Building Office prior to the reinstallation of the ceiling grid. ii) A second inspection of the HVAC operation will also be scheduled through the Building Office and will take place with the attendance of the HVAC contractor’s Air Balance Engineer. This inspection will take place when the suite in question is ready to be air-balanced. [***] = CONFIDENTIAL INFORMATION HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT TO THIS OMITTED INFORMATION. iii) The Building Engineer will inspect the construction on a periodic basis as well. (j) All existing thermostats, ceiling tiles, lighting fixtures and air conditioning grilles shall be saved and turned over to the Building Engineer.

  • Information Requirement The successful bidder's shall be required to advise the Office of Management and Budget, Government Support Services of the gross amount of purchases made as a result of the contract.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!