BUILT IN CUPBOARDS. Tenderers are refered to Architects' drawings or written specifications at the back of these Bills of Quantities for tender purposes "Formica" decorative laminate 21 Floor cupboard type "FD_450" 450 x 570 x 768mm high with top, sides, bottom, division, shelf, back, drawers, handles and dividing framework No 6 22 Floor cupboard type "FU_900" 900 x 504 x 868mm high with top, sides, bottom, division, shelf, back and double hinged door and dividing framework No 9 23 Floor cupboard type "FU_600" 600 x 600 x 2100mm high with top, sides, bottom, division, shelf, back and two door and dividing framework No 6 24 Floor cupboard type "XXX-Casework Xxxx BIC" size 900 x 600 x 2420mm high overall comprising tops, bottoms, sides, divisions, shelves, backs, doors, etc No 4 25 Wall cupboard type "XXX-XX-960 Showcase" size 960 x 900 x 1500mm high overall comprising "Formica" or equal approved counter tops, bottoms, sides, divisions, shelves, backs, filler panels, doors, ironmongery, finishes, etc No 2 26 Reception counter type "XXX-Countertop L-shaped" size, 3921mm maximum on centre line x 600mm wide x 900mm high overall comprising tops, bottoms, sides, divisions, shelves, backs, filler panels, doors, ironmongery, finishes, etc No 1 Carried to Collection R Section No. 2 Buildings Bill No. 7 CARPENTRY AND JOINERY Prepared by: Xxxxxx Xxxxxxxx Surveyors 27 Kitchen floor cupboard 2400 x 600 x 950mm high overall comprising, "Formica" or equal approved counter tops, bottoms, sides, divisions, shelves, backs, filler panels, doors, ironmongery, finishes, etc (sink elsewhere measured) No 1 Grade R classroom 28 Bag shelves 3500mm long x 370mm wide x 1105mm high overall comprising, bottoms, sides, divisions, shelves, etc No 2 29 Built-in book shelf 2000mm long x 400mm wide x 925mm high overall comprising shelves, sides, divisions, filler pieces, etc No 2 30 High level island open shelf unit with countertop 1898mm long x 400mm wide x 1800mm high overall comprising top, shelves, sides, divisions, filler pieces, etc No 2 Library reception desk 31 L-shaped melamine library reception desk 6600mm girth overall x 900 x 900mm high with quartz countertop, sides, bottom, divisions, shelves, back, doors, dividing framework and drawers (FD-900) (FD-450) No 1 Guardhouse desks 32 U-shaped melamine guardhouse desk 4200mm girth overall x 700 x 950mm high with top, sides, bottom, divisions, shelves, back doors, dividing framework and drawers (see drawing no "901-C17_22GH-00-01" at the back of these Bills of Quantities) No Carried to Collection R Section No. 2 Buildings Bill No. 7 CARPENTRY AND JOINERY Prepared by: Xxxxxx Xxxxxxxx Surveyors Section No. 2 Bill No. 7 CARPENTRY AND JOINERY COLLECTION Total Brought Forward from Page No. Carried Forward to Summary of Section Section No. 2 Buildings Bill No. 7 CARPENTRY AND JOINERY Prepared by: Xxxxxx Xxxxxxxx Surveyors Page No 89 90 91 92 93 94 95 96 R Amount Item No SECTION NO 2 Quantity Rate BILL NO. 8
Appears in 1 contract
Samples: www.idt.org.za
BUILT IN CUPBOARDS. Tenderers are refered to Architects' drawings or written specifications at the back of these Bills of Quantities for tender purposes "Formica" decorative laminate 21 20 Floor cupboard type "FD_450" 450 x 570 x 768mm high with top, sides, bottom, division, shelf, back, drawers, handles and dividing framework No 6 22 21 Floor cupboard type "FU_900" 900 x 504 x 868mm high with top, sides, bottom, division, shelf, back and double hinged door and dividing framework No 9 23 8 22 Floor cupboard type "FU_600" 600 x 600 x 2100mm high with top, sides, bottom, division, shelf, back and two door and dividing framework No 6 24 23 Floor cupboard type "XXX-Casework Xxxx BIC" size 900 x 600 x 2420mm high overall comprising tops, bottoms, sides, divisions, shelves, backs, doors, etc No 4 25 24 Wall cupboard type "XXX-XX-960 Showcase" size 960 x 900 x 1500mm high overall comprising "Formica" or equal approved counter tops, bottoms, sides, divisions, shelves, backs, filler panels, doors, ironmongery, finishes, etc No 2 26 25 Reception counter type "XXX-Countertop L-shaped" size, 3921mm maximum on centre line x 600mm wide x 900mm high overall comprising tops, bottoms, sides, divisions, shelves, backs, filler panels, doors, ironmongery, finishes, etc No 1 Carried to Collection R Section No. 2 Buildings Bill No. 7 CARPENTRY AND JOINERY Prepared by: Xxxxxx Xxxxxxxx Surveyors 27 26 Kitchen floor cupboard 2400 x 600 x 950mm high overall comprising, "Formica" or equal approved counter tops, bottoms, sides, divisions, shelves, backs, filler panels, doors, ironmongery, finishes, etc (sink elsewhere measured) No 1 Carried to Collection R Section No. 2 Buildings Bill No. 7 CARPENTRY AND JOINERY Prepared by: Xxxxxx Xxxxxxxx Surveyors Grade R classroom 28 27 Bag shelves 3500mm long x 370mm wide x 1105mm high overall comprising, bottoms, sides, divisions, shelves, etc No 2 29 28 Built-in book shelf 2000mm long x 400mm wide x 925mm high overall comprising shelves, sides, divisions, filler pieces, etc No 2 30 29 High level island open shelf unit with countertop 1898mm long x 400mm wide x 1800mm high overall comprising top, shelves, sides, divisions, filler pieces, etc No 2 Library reception desk 31 L-shaped melamine library reception desk 6600mm girth overall x 900 x 900mm high with quartz countertop, sides, bottom, divisions, shelves, back, doors, dividing framework and drawers (FD-900) (FD-450) No 1 Guardhouse desks 32 U-shaped melamine guardhouse desk 4200mm girth overall x 700 x 950mm high with top, sides, bottom, divisions, shelves, back doors, dividing framework and drawers (see drawing no "901-C17_22GH-00-01" at the back of these Bills of Quantities) No Carried to Collection R Section No. 2 Buildings Bill No. 7 CARPENTRY AND JOINERY Prepared by: Xxxxxx Xxxxxxxx Surveyors Section No. 2 Bill No. 7 CARPENTRY AND JOINERY COLLECTION Total Brought Forward from Page No. Carried Forward to Summary of Section Section No. 2 Buildings Bill No. 7 CARPENTRY AND JOINERY Prepared by: Xxxxxx Xxxxxxxx Surveyors Page No 89 90 91 92 93 94 95 96 R Amount R Amount Item No SECTION NO 2 Quantity Rate BILL NO. 8Rate
Appears in 1 contract
Samples: www.idt.org.za
BUILT IN CUPBOARDS. Tenderers are refered to Architects' drawings or written specifications at the back of these Bills of Quantities for tender purposes "Formica" decorative laminate 21 Floor cupboard type "FD_450" 450 x 570 x 768mm high with top, sides, bottom, division, shelf, back, drawers, handles and dividing framework No 6 22 Floor cupboard type "FU_900" 900 x 504 x 868mm high with top, sides, bottom, division, shelf, back and double hinged door and dividing framework No 9 23 Floor cupboard type "FU_600" 600 x 600 x 2100mm high with top, sides, bottom, division, shelf, back and two door and dividing framework No 6 24 Floor cupboard type "XXX-Casework Xxxx BIC" size 900 x 600 x 2420mm high overall comprising tops, bottoms, sides, divisions, shelves, backs, doors, etc No 4 25 Wall cupboard type "XXX-XX-960 Showcase" size 960 x 900 x 1500mm high overall comprising "Formica" or equal approved counter tops, bottoms, sides, divisions, shelves, backs, filler panels, doors, ironmongery, finishes, etc No 2 26 Reception counter type "XXX-Countertop L-shaped" size, 3921mm maximum on centre line x 600mm wide x 900mm high overall comprising tops, bottoms, sides, divisions, shelves, backs, filler panels, doors, ironmongery, finishes, etc No 1 Carried to Collection R Section No. 2 Buildings Bill No. 7 CARPENTRY AND JOINERY Prepared by: Xxxxxx Xxxxxxxx Surveyors 27 Kitchen floor cupboard 2400 x 600 x 950mm high overall comprising, "Formica" or equal approved counter tops, bottoms, sides, divisions, shelves, backs, filler panels, doors, ironmongery, finishes, etc (sink elsewhere measured) No 1 Grade R classroom 28 Bag shelves 3500mm long x 370mm wide x 1105mm high overall comprising, bottoms, sides, divisions, shelves, etc No 2 29 Built-in book shelf 2000mm long x 400mm wide x 925mm high overall comprising shelves, sides, divisions, filler pieces, etc No 2 30 High level island open shelf unit with countertop 1898mm long x 400mm wide x 1800mm high overall comprising top, shelves, sides, divisions, filler pieces, etc No 2 Library reception desk 31 L-shaped melamine library reception desk 6600mm girth overall x 900 x 900mm high with quartz countertop, sides, bottom, divisions, shelves, back, doors, dividing framework and drawers (FD-900) (FD-450) No 1 Guardhouse desks 32 U-shaped melamine guardhouse desk 4200mm girth overall x 700 x 950mm high with top, sides, bottom, divisions, shelves, back doors, dividing framework and drawers (see drawing no "901-C17_22GH-00-01" at the back of these Bills of Quantities) No Carried to Collection R Section No. 2 Buildings Bill No. 7 CARPENTRY AND JOINERY Prepared by: Xxxxxx Xxxxxxxx Surveyors Section No. 2 Bill No. 7 CARPENTRY AND JOINERY COLLECTION Total Brought Forward from Page No. Carried Forward to Summary of Section Section No. 2 Buildings Bill No. 7 CARPENTRY AND JOINERY Prepared by: Xxxxxx Xxxxxxxx Surveyors Page No 89 90 91 92 93 94 95 96 R Amount Item No SECTION NO 2 Quantity Rate BILL NO. 8Amount
Appears in 1 contract
Samples: www.idt.org.za
BUILT IN CUPBOARDS. Tenderers are refered to Architects' drawings or written specifications at the back of these Bills of Quantities for tender purposes "Formica" decorative laminate 21 20 Floor cupboard type "FD_450" 450 x 570 x 768mm high with top, sides, bottom, division, shelf, back, drawers, handles and dividing framework No 6 22 21 Floor cupboard type "FU_900" 900 x 504 x 868mm high with top, sides, bottom, division, shelf, back and double hinged door and dividing framework No 9 23 8 22 Floor cupboard type "FU_600" 600 x 600 x 2100mm high with top, sides, bottom, division, shelf, back and two door and dividing framework No 6 24 23 Floor cupboard type "XXX-Casework Xxxx BIC" size 900 x 600 x 2420mm high overall comprising tops, bottoms, sides, divisions, shelves, backs, doors, etc No 4 25 24 Wall cupboard type "XXX-XX-960 Showcase" size 960 x 900 x 1500mm high overall comprising "Formica" or equal approved counter tops, bottoms, sides, divisions, shelves, backs, filler panels, doors, ironmongery, finishes, etc No 2 26 25 Reception counter type "XXX-Countertop L-shaped" size, 3921mm maximum on centre line x 600mm wide x 900mm high overall comprising tops, bottoms, sides, divisions, shelves, backs, filler panels, doors, ironmongery, finishes, etc No 1 Carried to Collection R Section No. 2 Buildings Bill No. 7 CARPENTRY AND JOINERY Prepared by: Xxxxxx Xxxxxxxx Surveyors 27 26 Kitchen floor cupboard 2400 x 600 x 950mm high overall comprising, "Formica" or equal approved counter tops, bottoms, sides, divisions, shelves, backs, filler panels, doors, ironmongery, finishes, etc (sink elsewhere measured) No 1 Carried to Collection R Section No. 2 Buildings Bill No. 7 CARPENTRY AND JOINERY Prepared by: Xxxxxx Xxxxxxxx Surveyors Grade R classroom 28 27 Bag shelves 3500mm long x 370mm wide x 1105mm high overall comprising, bottoms, sides, divisions, shelves, etc No 2 29 28 Built-in book shelf 2000mm long x 400mm wide x 925mm high overall comprising shelves, sides, divisions, filler pieces, etc No 2 30 29 High level island open shelf unit with countertop 1898mm long x 400mm wide x 1800mm high overall comprising top, shelves, sides, divisions, filler pieces, etc No 2 Library reception desk 31 L-shaped melamine library reception desk 6600mm girth overall x 900 x 900mm high with quartz countertop, sides, bottom, divisions, shelves, back, doors, dividing framework and drawers (FD-900) (FD-450) No 1 Guardhouse desks 32 U-shaped melamine guardhouse desk 4200mm girth overall x 700 x 950mm high with top, sides, bottom, divisions, shelves, back doors, dividing framework and drawers (see drawing no "901-C17_22GH-00-01" at the back of these Bills of Quantities) No Carried to Collection R Section No. 2 Buildings Bill No. 7 CARPENTRY AND JOINERY Prepared by: Xxxxxx Xxxxxxxx Surveyors Section No. 2 Bill No. 7 CARPENTRY AND JOINERY COLLECTION Total Brought Forward from Page No. Carried Forward to Summary of Section Section No. 2 Buildings Bill No. 7 CARPENTRY AND JOINERY Prepared by: Xxxxxx Xxxxxxxx Surveyors Page No 89 90 91 92 93 94 95 96 R Amount R Amount Item No SECTION NO 2 Quantity Rate BILL NO. 88 CEILINGS AND PARTITIONS PREAMBLES For preambles see "Model Preambles for Trades (2008 Edition)" and Supplementary preambles as specified in the Trades SUPPLEMENTARY PREAMBLES Descriptions Items described as "nailed" shall be deemed to be fixed with hardened steel nails or pins or shot pinned to brickwork or concrete Items described as "plugged" shall be deemed to include screwing to fibre, plastic or metal plugs in brickwork or concrete at not exceeding 600 mm centres, and where described as "bolted" the bolts have been given elsewhere CEILINGS ETC. INSULATION "Aerolite" insulation 1 100mm Insulation closely fitted and laid on top of brandering between roof timbers etc. m2 1,553 NAILED UP CEILINGS 6mm "Cladit" or equal approved pressed fibre-cement boards with H-type pressed steel jointing strips 2 Ceilings including 38 x 38mm sawn softwood brandering at 400mm centres. m2 1,791 Carried to Collection Section No. 2 Buildings Bill No. 8 CEILINGS AND PARTITIONS Prepared by: Chauke Quantity Surveyors 3 Extra over ceiling for 600 x 600mm trap door of 38 x 50mm wrought softwood rebated frame with one 38 x 38mm sawn softwood cross brander covered with ceiling board and fitted flush in opening No 30 Gypsum plasterboard cornices 4 75mm Coved cornices m 1,602 Carried to Collection R Section No. 2 Buildings Bill No. 8 CEILINGS AND PARTITIONS
Appears in 1 contract
Samples: www.idt.org.za
