Acceptance of Products All drawings, specifications, technical documentation, samples, prototypes and Products are approved and/or accepted by Buyer if Buyer does not provide Seller a written objection and/or rejection within 10 days of receipt or other reasonable time established in writing by Seller. Failure to provide written objection and/or rejection will constitute an irrevocable acceptance by the Buyer of the Products. Any written objection and/or rejection must state with specificity all defects and non-conformities upon which Buyer will rely to support its rejection of the Products. ALL DEFECTS AND NON- CONFORMITIES WHICH ARE NOT SPECIFIED ARE WAIVED BY BUYER. If Xxxxx rejects the Products and, if requested by Seller, Xxxxx will return them to Seller at Buyer’s cost, within three days, or Buyer has irrevocably accepted the Products. No attempted revocation of acceptance will be effective, and Buyer will be limited to any available remedies specifically provided in the Terms for breach of warranty. Seller has a reasonable period of time to cure any non- conformity.
Manufacture of Products All Products marketed through Grantor's Web ------------------------- Site shall be manufactured, packaged, prepared, and shipped in accordance with the specifications and requirements described on Exhibit A hereto as it may be modified from time to time. Quality control standards relating to the Product's weight, color, consistency, micro-biological content, labeling and packaging are also set forth on Exhibit A. In the event that Exhibit A is incomplete, Products shall be manufactured and shipped in accordance with industry standards.
Reformulation of Products As of the Effective Date, and continuing thereafter, Products that Xxxxx directly manufactures, imports, distributes, sells, or offers for sale in California shall either: (a) be Reformulated Products pursuant to § 2.2, below; or (b) be labeled with a clear and reasonable exposure warning pursuant to §§ 2.3 and 2.4, below. For purposes of this Settlement Agreement, a “Reformulated Product” is a Product that is in compliance with the standard set forth in
Conformity of production 8.1. Procedures concerning conformity of production shall comply with those set out in the 1958 Agreement, Schedule 1 (E/ECE/TRANS/505/Rev.3) and meet the following requirements:
8.2. A vehicle approved pursuant to this Regulation shall be so manufactured as to conform to the type approved by meeting the requirements of paragraph 5. above;
8.3. The Type Approval Authority which has granted approval may at any time verify the conformity of control methods applicable to each production unit. The normal frequency of such inspections shall be once every two years.
Return of Products No Products or part shall be returned to Seller without an approved Return Goods Authorization (“RMA”) from Seller. Custom and special order Products are non-returnable. Returns are subject to a restocking fee.
Use of Products 3.28.1 In the performance of this contract, Consultant shall make maximum use of products containing recovered materials that are EPA-designated items unless the product cannot be acquired (i) competitively within a timeframe providing for compliance with the contract performance schedule; (ii) meeting contract performance requirements; or (iii) at a reasonable price.
3.28.2 Consultant shall abide by the list of EPA-designated items available on EPA’s Comprehensive Procurement Guidelines web site: xxxxx://xxx.xxx.xxx/smm/comprehensive-procurement-guideline-cpg-program.
Discontinuance of Products Supplier shall provide at least twelve (12) months written notice to DXC prior to Supplier’s discontinuance of manufacturing any Products. Such notice shall include, at a minimum, DXC part numbers, substitutions, and last date that orders will be accepted for such Products.
Supply of Product 4.1 DAEWOONG shall manufacture and supply Product to AEON in a primary packaged and labeled form. Product packaging shall display the logo of DAEWOONG (to the extent required by applicable law) and AEON and the outer label shall be marked using English language in accordance with applicable laws and Product’s Regulatory Approvals.
4.2 AEON’s estimate sales forecast of the Product during the Term of Agreement in the Territory in the Field is set forth in Annex D. Within ninety (90) days after the Effective Date, AEON shall provide DAEWOONG with a non-binding twelve (12) month rolling forecast of its requirements of Product, which the Parties agree is not a commitment to buy any stated quantity. Thereafter, on at least a quarterly basis, AEON shall provide DAEWOONG with an updated twelve (12) month rolling forecast, together with a binding six (6) month forecast to the extent AEON has requested Safety Stock as described in Article 4.10 below. Each such forecast shah be referred to herein as a “Forecast.”
4.3 AEON may from time to time submit Purchase Orders to DAEWOONG for Product in accordance with the forecasting requirements in Article 4.2. Orders will be shipped on CIF Los Angeles port.
4.4 Once a Purchase Order for Product and Product Samples has been received by DAEWOONG, it shall be considered as irrevocable.
4.5 AEON agrees herein to place an Order for Product not later than [***] from receipt of Regulatory Approval.
4.6 Individual Purchase Orders of Product shall be placed at least [***] in advance of the required delivery date.
4.7 For the purpose of Commercialization, AEON will store and maintain the full quantity of Product in a clean, secured area in accordance with the reasonable directions and specifications provided by DAEWOONG in writing in connection thereof in the Territory. AEON will advise DAEWOONG on the applicable requirements specifically deriving from the laws and regulations in the Territory.
4.8 AEON agrees that DAEWOONG and its collaborators and agents, in DAEWOONG’s sole discretion, which collaborators and Agents will be subject to appropriate obligations of confidentiality, will have the right upon reasonable prior notice, to observe and to inspect and to audit AEON’s facility to ascertain compliance by AEON with the terms of this Agreement, including without limitation (a) the holding facilities for Product, and (b) AEON’s compliance with applicable law, including cGMP (if applicable). Following any such audit, DAEWOONG will discuss its observations and conclusions with AEON and corrective actions, if any, will be agreed upon by the Parties, and executed by AEON using Commercially Reasonable Efforts.
4.9 In addition to any other rights and remedies available to AEON, AEON shall have the right to recover lost profits in the event that DAEWOONG fails to deliver at least [***] in any [***] (a “Supply Default Event”). For purposes of this provision, lost profits would be equal to [***] of AEON operating profit (sales less direct expenses and the puce paid by AEON for such Products) on Products that have not been shipped against firm Purchase Orders during the period leading up to the Supply Default Event and bona fide Purchase Orders submitted by AEON that are consistent with the Forecast during the Supply Default Period (as defined below). Such payment shall be made with respect to all Product not shipped in the period giving rise to the Supply Default and for the period until DAEWOONG is again timely shipping Product to meet AEON’s needs (the “Supply Default Period”). The first such payment shall be made within [***] of the Supply Default Event, and every [***] thereafter. AEON agrees to permit full disclosure to DAEWOONG of AEON’s accounting records, solely related to the calculation of lost profits, for the [***] ending on the first day of the month in which the Supply Event Default occurred. In the event that DAEWOONG is unable to supply both AEON’s requirements of Product and its own and third parties’ requirements for Product, DAEWOONG shall allocate Product that DAEWOONG has in inventory and that DAEWOONG is able to Product, so that AEON receives its requirements of Product in priority to DAEWOONG and third parties.
4.10 At the request of AEON, DAEWOONG shall at its own cost and expense during the Term, maintain an amount of inventory of Product equal to AEON’s requirements for Product for [***] based on AEON’s most recent forecast (“Safety Stock”). The Safety Stock shall be (i) maintained for the sole benefit of AEON and its Affiliates, (ii) shall be stored at a secure facility in compliance with GMP, and (iii) shall not be used for the benefit of any other customer of DAEWOONG. DAEWOONG shall rotate the Safety Stock on a “First Expiry-First Out” basis for routine fulfillment of firm orders, subject to Article 7.
Licensed Product The term “Licensed Product” shall mean any product (a) the manufacture, use, importation, sale or offer for sale of which would, in the absence of the license granted by this Agreement, infringe a Valid Claim of any of the Licensed Patent Rights, or (b) that is comprised of, utilizes or incorporates Licensed Biological Materials, or (c) that is discovered, developed or made using a Licensed Process.
Sale of Products (a) All shipments, services, sales and quotations between Axitec, LLC. (“Seller”) and the purchaser (“Purchaser”) of Products set forth herein (“Products”) shall be subject to these Terms and Conditions of Sale (these “Terms” or this “Agreement”). Purchaser acknowledges receipt hereof and accepts these Terms. ANY ADDITIONAL OR DIFFERENT TERMS OR CONDITIONS CONTAINED IN ANY RESPONSE HERETO BY PURCHASER OR IN PURCHASER’S INITIAL ORDER AND ANY ASSERTIONS BY THE SALES REPRESENTATIVE THAT ARE NOT EXPRESSLY DESCRIBED IN THESE TERMS AND CONDITIONS OF SALE OUTSIDE OF THESE EXPRESSED TERMS AND CONDITIONS ARE HEREBY REJECTED BY SELLER AND SHALL BE OF NO EFFECT NOR IN ANY CIRCUMSTANCES BINDING ON SELLER. Seller’s acceptance of any order offered by Purchaser is EXPRESSLY MADE CONDITIONAL on Purchaser’s assent to these Terms, and under no circumstances will any terms other than these Terms apply to Seller’s sale of the Products.
(b) Seller’s quotations are not binding on Seller after 10 business days of submission of quotation. Each order of Products shall be in writing and no order of Purchaser shall be binding on Seller until the earlier of (i) payment of products has occurred or payment terms have been established and shipping arrangements have been made (ii) shipment to Purchaser of Products or (iii) transmittal of a written acceptance by Seller. Seller’s failure to respond to Purchaser’s order within two (2) weeks after receipt of the order shall be considered a rejection of the order.
(c) Purchaser may cancel any order before it has become binding pursuant to subsection (b) above. Seller may cancel all accepted orders and deliveries of Products if (i) Purchaser makes an assignment for the benefit of creditors, (ii) becomes party to a voluntary or involuntary proceeding of insolvency, bankruptcy or reorganization, (iii) generally becomes unable to pay its debts as they become due, (iv) fails to remit payment to Seller in accordance with the terms hereof or under any other agreement between Seller and Purchaser, or (v) breaches any other term, provision or condition contained in these Terms.
(vi) in cases where fraud and deceit is evident in the payment of products
(d) All references in sales brochures, data sheets and offers as to specifications, price and other details of the Products are approximate and shall not be binding on the Seller unless expressly agreed to in writing. Seller may, from time to time, update and replace Products in its line. Seller reserves the right to substitute updated Products, provided that such updated Products meet the specifications of the ordered Products in all material respects and are sold for the same price as the ordered Products.
(e) Purchaser acknowledges that Seller’s acceptance of any purchase order is dependent on Seller’s prior approval of Purchaser’s business credit and personal credit with personal guarantee where warranted. Purchaser acknowledges that Seller may demand assurances of Purchaser’s ability to pay by requesting such trade or banking references or a letter of credit or such other information as deemed adequate by Seller.
