Contract Change Process Sample Clauses

Contract Change Process. All Contract Changes shall be documented in a change order prepared by Supplier, at its cost and expense. Where LS&Co. requires a Contract Change, Supplier shall prepare such change order in response to LS&Co.’s request for that Contract Change. Each change order prepared by Supplier shall be identified by a unique number, contain a detailed description of the Contract Change and a detailed analysis of the impact of the proposed Contract Change, including an analysis of the impact on the Systems, Software and Equipment used to provide the Services, the scope and nature of the Services, and the level and quality of the Services. Each such change order shall specify the adjustments to the Charges, if any. Any Contract Change approved by LS&Co. shall be executed by LS&Co. and Supplier in accordance with the requirements in Section 29.9. No Contract Change shall be implemented without LS&Co.’s prior approval. LS&Co. shall have no liability for any activities of Supplier, including the provision of Systems or Services, that are undertaken pursuant to a Contract Change unless such Contract Change has been approved by LS&Co. in accordance with the Contract Change Process.
Sample 1
AutoNDA by SimpleDocs
Contract Change Process. “Changes” as defined in Exhibit 20 shall be addressed in accordance with the Contract Change Process set forth in Exhibit 20. .
Sample 1
Contract Change Process. All proposed changes by Customer or EDS (i) that contemplate a change to, and not simply an increase in or reduction of, the Services, (ii) to Customer Equipment, Customer Software, Customer Location, Customer's wide-area network (including equipment, network and Software components) or the configuration of information systems, and which would affect EDS’s performance or delivery of the Services or EDS’s ability to satisfy the Service Levels, or (iii) that involve Customer proposals for Variable Services, (collectively, "Changes"), shall be subject to using a formal contract change process (the "Contract Change Process"). The Contract Change Process is set forth in Exhibit 20. No Changes will be implemented without first satisfying the Contract Change Process, and executing a written supplement to this Agreement setting forth applicable specifications, schedules, resources to be utilized, responsibilities of the Parties, definition of successful completion based on objective criteria, any changes in Service Levels, and any Variable Service Charges resulting from the Change.
Sample 1
Contract Change Process. As set forth in the Second Amended and Restated Data Processing Services Agreement between EDS and Customer, all proposed changes by Customer or EDS (i) that contemplate a change to, and not simply an increase in or reduction of, the Services, (ii) to Customer Equipment, Customer Software, Customer Location, Customer's wide-area network (including equipment, network and Software components) or the configuration of information systems, and which would affect EDS’s performance or delivery of the Services or EDS’s ability to satisfy the Service Levels, or (iii) that involve Customer proposals for Variable Services, (collectively, "Changes"), shall be subject to using the Contract Change Process as set forth in this Exhibit 20.
Sample 1

Related to Contract Change Process

  • Alternative Process Nothing herein shall in any way be deemed to limit the ability of the Lenders to serve any such process or summonses in any other manner permitted by applicable law.

  • Change Order (5) The Change Order is then submitted to the Project Manager who immediately processes the CO with OPC as required by Bulletin 3.5 and BGS’ Contracting Plan.

  • Product Changes Vocera shall have the right, in its absolute discretion, without liability to End User, to update to provide new functionality or otherwise change the design of any Product or to discontinue the manufacture or sale of any Product. Vocera shall notify End User at least 90 days prior to the delivery of any Product which incorporates a change that adversely affects form, fit or function (“Material Change”). Vocera shall also notify End User at least 90 days prior to the discontinuance of manufacture of any Product. Notification will be made as soon as reasonably practical for changes associated with regulatory or health and safety issues.

  • Benchmark Replacement Conforming Changes In connection with the use, administration, adoption or implementation of a Benchmark Replacement, the Administrative Agent will have the right to make Conforming Changes from time to time and, notwithstanding anything to the contrary herein or in any other Loan Document, any amendments implementing such Conforming Changes will become effective without any further action or consent of any other party to this Agreement or any other Loan Document.

  • Change Orders Any alteration or deviation from the Services mentioned or any other contractual specifications that result in a revision of this Agreement shall be executed and attached to this Agreement as a change order (“Change Order”).

  • Selection Process The Mortgage Loans were selected from among the outstanding one- to four-family mortgage loans in the Seller's portfolio at the related Closing Date as to which the representations and warranties set forth in Subsection 9.02 could be made and such selection was not made in a manner so as to affect adversely the interests of the Purchaser;

  • Specification Changes Upon any change in the Product Specifications, stability protocols, QC laboratory methods raw material specification or Packaging Specifications (whether initiated by Horizon or made in response to a request by sanofi-aventis that is agreed to by Horizon), including the addition of new packaging configurations, new SKUs, new formulations, or a change in either raw materials or Packaging Component supply, Horizon shall promptly advise sanofi-aventis in writing of such changes, and sanofi-aventis shall promptly advise Horizon as to any scheduling and/or price adjustments which may result from such changes. Prior to implementation of such changes, the Parties shall negotiate in good faith in an attempt to reach agreement on (a) the new Product Price for any Product which embodies such changes, (b) any amounts to be reimbursed by Horizon to sanofi-aventis as described in the next sentence of this paragraph, and (c) any other amendments to this Agreement which may be necessitated by such changes (i.e., an adjustment to the lead time for purchase orders). Horizon shall reimburse sanofi-aventis for the mutually agreed upon reasonable expenses incurred by sanofi-aventis as a result of such changes, including, but not limited to, reimbursing sanofi-aventis for its mutually agreed validation and development costs, capital expenditure costs, costs for any Packaging Components or other materials rendered unusable as a result of such changes, and cost of required stability to support a change. If during the Term Horizon amends the Product Specifications or Packaging ***Confidential Treatment Requested MANUFACTURING AND SUPPLY AGREEMENT PAGE 7 Specifications (whether voluntarily or as required by law) so as to render obsolete quantities of the Active Ingredient, Excipients and/or Packaging Components for the Product on hand at sanofi-aventis, Horizon shall (i) accept the return of all such obsolete Active Ingredient and (ii) purchase from sanofi-aventis, at sanofi-aventis’ Acquisition Cost, all such obsolete Excipients and Packaging Components obtained by sanofi-aventis pursuant to its normal procurement policies to manufacture quantities of the Product pursuant to Horizon forecasts under Section 6.1. Sanofi-aventis’ normal procurement policies for purposes of the preceding sentence of this Article 5 shall be considered to be quantities of Excipients and Packaging Components corresponding to the immediately following […***…] months of Horizon’s most recent forecasted Product demand. If a change in Specifications is initiated by sanofi-aventis and approved by Horizon, any cost associated with said change shall be borne by sanofi-aventis. In the event that a change in Specifications is initiated by Horizon or driven by a regulatory or business change, the costs associated with qualification of the change shall be paid by Horizon. The amount of the change shall be reasonable and customary and subject to written approval by Horizon, such approval not to be unreasonably withheld. Sanofi-aventis, with written agreement and approval from Horizon, will be responsible for the appropriate (cGMP) destruction of any materials covered under this Article 5, and sanofi-aventis shall be reimbursed by Horizon at the reasonable and customary approved rate.

  • Selection of Architect/Construction Drawings Tenant shall retain the architect/space planner designated by Tenant and reasonably approved by Landlord (the “Architect”) to prepare the “Construction Drawings,” as that term is defined in this Section 3.2. Tenant shall retain the engineering consultants selected by Tenant (the “Engineers”) to prepare all plans and engineering working drawings relating to the structural, mechanical, electrical, plumbing, HVAC, life safety, and sprinkler work in the Premises, which work is not part of the Base Building. The plans and drawings to be prepared by Architect and the Engineers hereunder shall be known collectively as the “Construction Drawings.” All Construction Drawings shall comply with the drawing format and specifications reasonably determined by Landlord, and shall be subject to Landlord’s approval. Tenant and Architect shall verify, in the field, the dimensions and conditions as shown on the relevant portions of the base building plans, and Tenant and Architect shall be solely responsible for the same, and Landlord shall have no responsibility in connection therewith. Landlord’s review of the Construction Drawings as set forth in this Section 3, shall be for its sole purpose and shall not imply Landlord’s review of the same, or obligate Landlord to review the same, for quality, design, Code compliance or other like matters. Accordingly, notwithstanding that any Construction Drawings are reviewed by Landlord or its space planner, architect, engineers and consultants, and notwithstanding any advice or assistance which may be rendered to Tenant by Landlord or Landlord’s space planner, architect, engineers, and consultants, Landlord shall have no liability whatsoever in connection therewith and shall not be responsible for any omissions or errors contained in the Construction Drawings, and Tenant’s waiver and indemnity set forth in the Lease shall specifically apply to the Construction Drawings.

  • Term SOFR Conforming Changes In connection with the use or administration of Term SOFR, the Administrative Agent will have the right to make Conforming Changes from time to time and, notwithstanding anything to the contrary herein or in any other Loan Document, any amendments implementing such Conforming Changes will become effective without any further action or consent of any other party to this Agreement or any other Loan Document. The Administrative Agent will promptly notify the Borrower and the Lenders of the effectiveness of any Conforming Changes in connection with the use or administration of Term SOFR.

  • Selection of Reviewing Party; Change in Control If there has not been a Change in Control, any Reviewing Party shall be selected by the Board of Directors, and if there has been such a Change in Control (other than a Change in Control which has been approved by a majority of the Company's Board of Directors who were directors immediately prior to such Change in Control), any Reviewing Party with respect to all matters thereafter arising concerning the rights of Indemnitee to indemnification of Expenses under this Agreement or any other agreement or under the Company's Certificate of Incorporation or Bylaws as now or hereafter in effect, or under any other applicable law, if desired by Indemnitee, shall be Independent Legal Counsel selected by Indemnitee and approved by the Company (which approval shall not be unreasonably withheld). Such counsel, among other things, shall render its written opinion to the Company and Indemnitee as to whether and to what extent Indemnitee would be entitled to be indemnified hereunder under applicable law and the Company agrees to abide by such opinion. The Company agrees to pay the reasonable fees of the Independent Legal Counsel referred to above and to indemnify fully such counsel against any and all expenses (including attorneys' fees), claims, liabilities and damages arising out of or relating to this Agreement or its engagement pursuant hereto. Notwithstanding any other provision of this Agreement, the Company shall not be required to pay Expenses of more than one Independent Legal Counsel in connection with all matters concerning a single Indemnitee, and such Independent Legal Counsel shall be the Independent Legal Counsel for any or all other Indemnitees unless (i) the employment of separate counsel by one or more Indemnitees has been previously authorized by the Company in writing, or (ii) an Indemnitee shall have provided to the Company a written statement that such Indemnitee has reasonably concluded that there may be a conflict of interest between such Indemnitee and the other Indemnitees with respect to the matters arising under this Agreement.

Time is Money Join Law Insider Premium to draft better contracts faster.