Control; Processes Sample Clauses

Control; Processes. Micron will, or will cause its relevant affiliates to, review with Intel any reasonable control and process mechanisms applicable to the manufacture of all Probed Wafers sold by Micron under this Agreement, including but not limited to such mechanisms that are utilized to meet or exceed the Specifications for the Probed Wafers. The Parties agree to work together in good faith to define mutually agreeable control and process mechanisms including the following: [***]; and [***]; provided, however, that Micron will not be required to bear any expense relating to Intel’s control and process mechanism requests that are in addition to those used by Micron or its relevant affiliates. Micron will promptly notify Intel of all Excursions, which will impact scheduled commitments to Intel.
Sample 1Sample 2See All (10)
AutoNDA by SimpleDocs
Control; Processes. Micron and the Joint Venture Company will periodically review Micron’s processes and control mechanisms relating to the performance of the Manufacturing Services, including the Performance Criteria. If the Joint Venture Company requests any changes or additions to Micron’s existing process and control mechanisms, the Parties shall work together in good faith to resolve any such requests.
Sample 1Sample 2See All (6)
Control; Processes. The Joint Venture Company and Intel will review the Joint Venture Company's control and process mechanisms, including but not limited to such mechanisms that are utilized to ensure that all parameters of the Specification, including the Performance Criteria, are met or exceeded in the Joint Venture Company's manufacture of Probed Wafers by either the Joint Venture Company or its approved subcontractor for Intel. The Parties agree to work together in good faith to define mutually agreeable control and process mechanisms including the following: ****.
Sample 1Sample 2See All (4)
Control; Processes. The Purchaser and Inotera shall review Inotera’s control and process mechanisms, including such mechanisms that are utilized to ensure that all parameters of the Specifications and Performance Criteria are met or exceeded in Inotera’s manufacture of Conforming Wafers. The Purchaser and Inotera agree to work together in good faith to define mutually agreeable control and process mechanisms, including the following: (a) e-test (also known as parametric test capability); (b) qualification methodology plan; (c) product qualification support; DLI-266521234v1 (d) Probe Testing capability; (e) change control process; and (f) failure analysis capability and methodology.
Sample 1
Control; Processes. The Parties shall review the Joint Venture Company’s control and process mechanisms, including such mechanisms that are utilized to ensure that all parameters of the Specifications and Performance Criteria are met or exceeded in the Joint Venture Company’s manufacture of Conforming Wafers. The Parties agree to work together in good faith to define mutually agreeable control and process mechanisms, including the following: [***].
Sample 1Sample 2
Control; Processes. The Joint Venture Company and Intel Singapore will review the Joint Venture Company’s control and process mechanisms, including but not limited to such mechanisms that are utilized to ensure that all parameters of the Specification, including the Performance Criteria, are met or exceeded in the Joint Venture Company’s manufacture of Products by either the Joint Venture Company or its approved subcontractor for Intel Singapore. The Parties agree to work together in good faith to define mutually agreeable control and process mechanisms including the following: [***].
Sample 1
Control; Processes. The Joint Venture Company and Micron Singapore will review the Joint Venture Company’s control and process mechanisms, including but not limited to such mechanisms that are utilized to ensure that all parameters of the Specification, including the Performance Criteria, are met or exceeded in the Joint Venture Company’s manufacture of Products by either the Joint Venture Company or its approved subcontractor for Micron Singapore. The Parties agree to work together in good faith to define mutually agreeable control and process mechanisms including the following: [***].
Sample 1
AutoNDA by SimpleDocs
Control; Processes. The Purchaser and Inotera shall review Inotera's control and process mechanisms, including such mechanisms that are utilized to ensure that all parameters of the Specifications and Performance Criteria are met or exceeded in Inotera's manufacture of Conforming Wafers. The Purchaser and Inotera agree to work together in good faith to define mutually agreeable control and process mechanisms, including the following: [***].
Sample 1
Control; Processes 
Sample 1Sample 2Sample 3See All (5)

Related to Control; Processes

  • Quality Control Procedures The Seller shall have an internal quality control program that verifies, on a regular basis, the existence and accuracy of the legal documents, credit documents, property appraisals, and underwriting decisions. The program shall include evaluating and monitoring the overall quality of the Seller's loan production and the servicing activities of the Seller. The program is to ensure that the Mortgage Loans are originated and serviced in accordance with Accepted Servicing Standards and the Underwriting Guidelines; guard against dishonest, fraudulent, or negligent acts; and guard against errors and omissions by officers, employees, or other authorized persons.

  • Change Control Procedures (a) No changes or additions may be made to any Work Order without the written agreement of LAUSD as evidenced by a duly executed Change Order. (b) Contractor will not take an action or make a decision which may have a material effect on LAUSD or which adversely affects the function or performance of, or decreases the resource efficiency of, the Services, including implementing changes in technology or equipment and software configuration, without first obtaining LAUSD’s written approval, which approval LAUSD may withhold in its sole discretion as respects any change which may have an adverse effect on LAUSD or the Services.

  • Processes Any employer, employee, trade union or employer’s association may at any point in time apply for an exemption from any of the provisions of this Collective Agreement. The applicant is required to complete and submit in writing with the relevant office of the Council, a fully and properly completed prescribed application for exemption form, accompanied by all relevant supporting documentation.

  • Quality Control Program Engineer shall have a quality control program in place that ensures that all deliverable work is of high quality. Engineer shall submit a plan detailing its program to the Inspection Branch of the TxDOT Bridge Division for review and approval prior to beginning work. State may review or audit the programs.

  • Recall Procedures ‌ A. Eligibility to be recalled from layoff and employment shall terminate after fourteen (14) months. Employees shall be recalled from layoff based on seniority in the following order: 1. Employees shall be recalled to the position from which they were laid off starting within the employee’s Department; or, 2. Employees shall be recalled to other positions within the position series from which they were laid off starting with the employee’s Department and then other Departments, provided the employee possesses the qualifications, performance record, aptitude, and ability to perform the work; or 3. Employees shall be recalled to other positions the employee previously held, provided the employee completed probation in that position starting with the employee’s Department and then other Departments, and provided the employee possesses the qualifications, performance record, aptitude, and ability to perform the work. 4. Employees shall be recalled from layoff into vacant County positions not previously held provided: 1) The employee possesses the qualifications, performance record, aptitude, ability to perform the work, and the ability to meet the minimum requirements for the position as defined in the job description; and 2) The employee specifies in writing to the Human Resources Office, within thirty (30) days of the date of layoff, the position(s) they want to be considered for recall. B. Employees on layoff who have been offered recall, and who have voluntarily refused such recall, shall be removed from the recall list and their employment shall be terminated. A form provided by the Human Resources Office signed by the employee shall document this recall refusal. C. When necessary, the Human Resources Director shall determine the recalled employee’s qualifications, performance record, aptitude, and ability to perform the work through discussions with the applicable Supervisor and a meeting with the employee. The employee shall be notified of the right to have a representative of his or her choosing present. If there is a disagreement over the County not allowing the employee to exercise recall rights, the Human Resources Director shall document this disagreement. D. After finding out more information about a specific job(s), a recalled employee may decide their overall qualifications, aptitude and ability are not compatible with the requirements of the job and may request to remain on the County recall list rather than pursue recall to the available position. Authorization to remain on layoff status, and return to the recall list after declining recall, must be mutually agreed upon. A form produced by the Human Resources Office and signed by the employee shall document this process. E. Laid off employees shall report to work on the date specified in the notice of recall, such date shall be not less than fourteen (14) days from the date of the notice unless mutually agreed upon.

  • RECOVERY PROCEDURES 38.7.10.1 The nature and severity of any disaster will influence the recovery procedures. One crucial factor in determining how AT&T TENNESSEE will proceed with restoration is whether or not AT&T TENNESSEE’s equipment is incapacitated. Regardless of whose equipment is out of service, AT&T TENNESSEE will move as quickly as possible to aid with service recovery; however, the approach that will be taken may differ depending upon the location of the problem.

  • Operational Procedures In order to minimize operational problems, it will be necessary for trade information to be supplied in a secure manner by the Subadviser to the Fund’s Service Providers, including: JPMorgan Chase Bank, National Association (the “Custodian”), Virtus Fund Services (the “Fund Administrator”) BNY Mellon Investment Servicing (US) Inc., (the “Sub-Accounting Agent”), any Prime Broker to the Series, and all other Counterparties/Brokers as required. The Subadviser must furnish the Fund’s service providers with required daily information as to executed trades in a format and time-frame agreed to by the Subadviser, Custodian, Fund Administrator, Sub-Accounting Agent and Prime Broker/Counterparties and designated persons of the Fund. Trade information sent to the Custodian, Fund Administrator, Sub-Accounting Agent and Prime Broker/Counterparties must include all necessary data within the required timeframes to allow such parties to perform their obligations to the Series. The Sub-Accounting Agent specifically requires a daily trade blotter with a summary of all trades, in addition to trade feeds, including, if no trades are executed, a report to that effect. Daily information as to executed trades for same-day settlement and future trades must be sent to the Sub-Accounting Agent no later than 4:30 p.m. (Eastern Time) on the day of the trade each day the Fund is open for business. All other executed trades must be delivered to the Sub-Accounting Agent on Trade Date plus 1 by Noon (Eastern Time) to ensure that they are part of the Series’ NAV calculation. (The Subadviser will be responsible for reimbursement to the Fund for any loss caused by the Subadviser’s failure to comply with the requirements of this Schedule A.) On fiscal quarter ends and calendar quarter ends, all trades must be delivered to the Sub-Accounting Agent by 4:30 p.m. (Eastern Time) for inclusion in the financial statements of the Series. The data to be sent to the Sub-Accounting Agent and/or Fund Administrator will be as agreed by the Subadviser, Fund Administrator, Sub-Accounting Agent and designated persons of the Fund and shall include (without limitation) the following:

  • Change Control Procedure 34.1 In the event that either Party desires any change the terms of this Agreement or any Contract which may materially impact on the timings, scope, Specification or Charges of the Goods or Services, or the scope of either parties’ obligations under this Agreement or the relevant Contract, or which the relevant Party otherwise reasonably determines warrants the use of this change control procedure, the following procedures will apply: (a) the Party requesting the change will deliver a “Change Request” (in the form (or substantially in the same form) contained in Schedule 5 to this Agreement) which describes: (i) the nature of the change; (ii) the reason for the change; (iii) the effect that the requested change will have on the scope or Specification for the Goods or Services; and (iv) any change to the Charges and the Term. (b) Upon receipt of a Change Request, the receiving Party’s authorised representative will contact his/ her counterpart within 5 working days to discuss and agree the Change Request. The parties will negotiate the proposed changes to the Agreement and/or affected Contract in good faith and agree a timeline in which to finalise the Change Notice. (c) Neither party is obliged to agree to a Change Request, but if the parties do agree to implement such a Change Request, the appropriate authorised representatives of both parties will sign the Change Request which will be effective from the date set out in the Change Request. (d) If there is any conflict between the terms and conditions set out in the Agreement or any Contract and the Change Request, then the terms and conditions set out in the most recent fully executed Change Request will apply. (e) The Supplier shall neither be relieved of its obligations to supply the Goods and/or Services in accordance with the terms and conditions of this Agreement or any Contract, nor be entitled to an increase in the Charges as the result of: (i) a General Change in Law; or (ii) a Specific Change in Law where the effect of that Specific Change in Law on the Goods and/or Services is reasonably foreseeable at the Commencement Date of this Agreement, or, where the Change Request relates to a Contract, the applicable Contract Commencement Date. 34.2 The Parties agree that any variations to the Agreement or any Contract to reflect non- material changes (including for example a change to the name/contact details of a Party’s representative) may be agreed in writing and shall not be required to be made in accordance with the procedure in this clause 34, provided always that UKRI shall, in their absolute discretion, decide whether a proposed change is non-material for these purposes.

  • Collection Procedures (a) On or before the Closing Date, the Seller and the Purchaser shall have established and shall maintain thereafter the system of collecting and processing Collections of Receivables in accordance with Section 2.02 of the Servicing Agreement. (b) The Seller shall cause all in-store payments to be (i) processed as soon as possible after such payments are received by the Seller but in no event later than the Business Day after such receipt, and (ii) delivered to the Servicer or, if a Daily Payment Event has occurred, deposited in the Collection Account no later than the second Business Day following the date of such receipt. (c) The Seller and the Purchaser shall deliver to the Servicer or, if a Daily Payment Event has occurred, deposit into the Collection Account all Recoveries received by it within two Business Days after the Date of Processing for such Recovery. (d) Any funds held by the Seller representing Collections of Receivables shall, until delivered to the Servicer or deposited in the Collection Account, be held in trust by the Seller on behalf of the Trustee as part of the Trust Estate. (e) The Seller hereby irrevocably waives any right to set off against, or otherwise deduct from, any Collections. (f) The Seller acknowledges that Seller shall not have any right, title or interest in and to any Trust Account.

  • Medical Procedures 21.01 The Board shall distribute a copy of its Operating Procedures for administration of prescribed medication to pupils in schools and Procedures for health support services to each Teacher. 21.02 In accordance with Operating Procedure Special Education Services 8, a Teacher may refuse without prejudice a request to administer medications except in life-threatening situations.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!